Synthetic Modular Antibody Construction by Using the SpyTag/SpyCatcher Protein-Ligase System

Efforts to engineer recombinant antibodies for specific diagnostic and therapy applications are time consuming and expensive, as each new recombinant antibody needs to be optimized for expression, stability, bio-distribution, and pharmacokinetics. We have developed a new way to construct recombinant antibody-like “devices” by using a bottom-up approach to build them from well-behaved discrete recombinant antibody domains or “parts”. Studies on antibody structure and function have identified antibody constant and variable domains with specific functions that can be expressed in isolation. We used the SpyTag/SpyCatcher protein ligase to join these parts together, thereby creating devices with desired properties based on summed properties of parts and in configurations that cannot be obtained by using genetic engineering. This strategy will create optimized recombinant antibody devices at reduced costs and with shortened development times.     

A similarity coefficient measure and machine-parts grouping in cellular manufacturing systems

For more than three decades, similarity coefficient measures one of the important tools for solving group technology problems have gained the attention of the research community in cellular manufacturing systems. A new similarity coefficient measure that uses a set of important characteristic properties for grouping is developed here for use as an intermediate tool to form cohesive cells. A mathematical model that uses this similarity coefficient for optimally solving the cell-formation problems in cellular manufacturing is developed. A heuristic procedure that improves the optimal methodology in term of solution capability of the large instances is devised for an efficient solution. Both the optimal methodology and the heuristic are applied to some well-known problems from literature to compare the grouping efficiencies. The similarity coefficient and the solution methodologies developed are able to solve the cell formation problems efficiently.     

Probabilistic design of ground improvement by vertical drains for soil of spatially variable coefficient of consolidation

The design of soil consolidation via prefabricated vertical drains (PVDs) has been traditionally carried out deterministically and thus can be misleading due to the ignorance of the uncertainty associated with the inherent variability of soil properties. To treat such uncertainty in the course of design of soil improvement by PVDs, more rational probabilistic methods are necessary. In this paper, a simplified probabilistic method is proposed in which the inherent variability of the coefficient of consolidation, which is the most significant uncertain soil parameter that affects the consolidation process, is considered. An easy-to-use design procedure and charts are provided for routine use by practitioners.     

Visualization and concentration measurement of a direct-injection hydrogen jet in a constant-volume vessel using spark-induced breakdown spectroscopy

In this work, spark-induced breakdown spectroscopy (SIBS) was employed to investigate the mixing process of a hydrogen jet in a constant-volume vessel. The local fuel concentration of the hydrogen jet was measured at several locations, using a SIBS sensor. A high-speed camera was used to visualize spark discharge fluctuations, and hydrogen jet concentration measurements were conducted simultaneously. Spectrally resolved atomic emissions from the plasma generated by the spark plug were examined to determine the local equivalence ratio. Direct visualization of the spark discharge provided useful information about the influence of spark discharge characteristics related to the spark timing. Using the developed SIBS sensor, atomic emission spectra were obtained from hydrogen H_α at 656 nm and nitrogen N (I) at 501 nm. Comparison of the intensity peaks of atomic emissions from hydrogen and nitrogen allows the local hydrogen concentration in a measured volume to be determined, and hence also the local equivalence ratio. The measurement results demonstrate the local variation in the equivalence ratio throughout the jet and along its axis. From the results, the spatial structure of the hydrogen jet affects the hydrogen/nitrogen mixing and could be clarified with SIBS technique when the spark is discharged.     

Static and dynamic compressive properties of polypropylene/zinc oxide nanocomposites

The effect of strain rate is widely recognized as an essential factor that influences the mechanical properties of polymer matrix composites. Despite its importance, no previous work has been reported on the high‐strain rate behavior of polypropylene/zinc oxide nanocomposites. Based on this, static and dynamic compression properties of polypropylene/zinc oxide nanocomposites, with particle contents of 1%, 3%, and 5% by weight, were successfully studied at different strain rates (i.e., 0.01 s^?1, 0.1 s^?1, 650 s^?1, 900 s^?1, and 1100 s^?1) using a universal testing machine and a split Hopkinson pressure bar apparatus. For standardization, approximately 24 nm of zinc oxide nanoparticles were embedded into polypropylene matrix for each of the tested polypropylene/zinc oxide nanocomposites. Results show that the yield strength, the ultimate strength, and the stiffness properties, of polypropylene/zinc oxide nanocomposites, were greatly affected by both particle loading and applied strain rate. Furthermore, the rate sensitivity and the absorbed energy of all tested specimens showed a positive increment with increasing strain rate, whereas the thermal activation volume showed a contrary trend. In addition, the fractographic analysis and particle dispersion of all composite specimens were successfully obtained using a field emisission scanning electron microscopy. POLYM. ENG. SCI., 54:949–960, 2014. © 2013 Society of Plastics Engineers     

Influence of Elevated Temperature and Stress Ratio on the Fatigue Response of AM60B Magnesium Alloy

The fatigue response of a high pressure die-cast AM60B Mg alloy is studied at room and elevated temperatures. The fatigue tests are conducted with stress ratio of R?=?0.1 and frequency of 30?Hz. The main objective is to determine whether elevated temperature would affect the fatigue response of the alloy. In addition, fatigue crack growth characteristics of the alloy is investigated at room temperature. The purpose of this test is to ascertain the capability and accuracy of a finite element approach coupled with the Walker model in assessing the life cycle of the alloy, in consideration of the influence of stress ratio.     

Radiation crosslinked polyvinyl alcohol/polyvinyl pyrrolidone/acrylic acid hydrogels: swelling,crosslinking and dye adsorption study

Iranian Polymer Journal - Hydrogels were produced from mixtures of polyvinyl alcohol (PVA), polyvinyl pyrrolidone (PVP), and acrylic acid (AAc) using γ-radiation at doses of 3, 7, and...     

Microbial fuel cells for bioelectricity generation through reduction of hexavalent chromium in wastewater: A review

The study proposes the use of microbial fuel cell (MFC) technology to reduce toxic Cr(VI) present in industrial wastewater to less toxic trivalent chromium [Cr(III)], while generating electricity through a bioelectrochemical oxidation-reduction process. Factors influencing the treatment process and electricity generation include the concentration of Cr(VI) in wastewater, substrate types used for anodes, types of microorganisms involved, types of cathode and anode, surface area of the cathode and anode, and pH and temperature of cathodic and anodic solutions. While other heavy metals in wastewater may be removed by MFC technology, Cr(VI) removal is more efficient in terms of electricity generation. Previous research indicated that the maximum electrical power generated by Cr(VI) removal through the use of MFCs is 1600 mW/m², which is expected to increase as the factors affecting this process are optimized. Based on current data, MFC-based electricity generation along with Cr(VI) removal is a potential future source of sustainable energy. However, research priorities need to focus on reducing the cost of MFC technology by using economical and effective materials and increasing electricity production.     

High dielectric permittivity and percolative behavior of polyvinyl alcohol/potassium dihydrogen phosphate composites

A new kind of anhydrous, transparent, and flexible potassium dihydrogen phosphate (KH₂PO₄ or KDP)/polyvinyl alcohol (PVA) composite in the form of film (0.10 mm) has been prepared by solution casting technique. KDP is well dispersed in the polymer matrix as observed from the microstructural studies. Frequency and temperature dependent dielectric properties of the composites have been studied with varying KDP concentrations. The PVA/KDP composite films exhibited extraordinarily high relative permittivity ε′ ∼ 430 (80 times higher compared with pure PVA and even higher than KDP) near the percolation threshold (ϕ_C = 2.5 wt % KDP) with low dielectric losses (∼ 0.15) at 1 kHz and room temperature. Such flexible, low loss and high dielectric permittivity material has enormous importance for application in devices. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012