Analytical solution of a system of nonlinear measuring equations of a 12-pole microwave reflectometer

Analytical solution of a system of nonlinear measuring equations of a 12-pole microwave reflectometer was obtained. Criteria for selecting a true solution in the general case were developed and the analysis was conducted for a number of particular cases that may generate practical interest.     

Structure Formation in Densely Sintered Household Ceramics

The formation specifics of the structure and phase composition of densely sintered ceramics based on a low-melting argillaceous material from Belarus together with a combined flux and a grog additive are investigated. The correlation between the physicochemical properties, structure, phase composition, and the time-temperature firing schedules of the developed materials are investigated. Electron probe microanalysis makes it possible to monitor variations in the chemical composition at various local sites and compare it with the estimated composition of the mixture. The optimum regimes for the heat treatment of articles are determined. __________ Translated from Steklo i Keramika, No. 6, pp. 32 – 36, June, 2005.     

Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

Principles of reference-aided decision making

A unified approach to decision making with extremal many-criteria models, expert estimates, and voting is developed on the basis of reference and distance concepts and taxonomy methods. It involves the solution of many-criteria problems with the Pareto optimum. Examples demonstrating the effectiveness and universality of the approach are given.     

Automatic ultrastructure segmentation of reconstructed cryoEM maps of icosahedral viruses.

We present an automatic algorithm to segment all the local and global asymmetric units of a three-dimensional density map of icosahedral viruses. This approach is readily applicable to the structural analysis of a broad range of virus structures that are reconstructed using cryo-electron microscopy (cryo-EM) technique. Our algorithm includes three major steps operating on the three dimensional density map: the detection of critical points of the volumetric density function, the detection of global and local symmetry axes, and, finally, the boundary segmentation of all the asymmetric units. We demonstrate the efficacy of our algorithm and report our results on several experimental volumetric datasets, consisting of both reconstructed cryo-EM molecular density maps taken from the European Bioinformatics Institute archive, as well our own synthetically generated (blurred) maps calculated from X-ray resolution molecular structural data taken from the Protein Data Bank.     

All-optical phase-independent logic elements based on phase shiftinduced by coherent soliton collisions

We demonstrate, for the first time to our knowledge, that a fast coherent collision between two Kerr spatial solitons can give rise to a significant phase shift for both interacting beams. The maximal collision-induced phase shift ≈π rad takes place when the amplitudes of the solitons are equal (η₁=η₂) and the length of the interaction zone is comparable with a soliton phase period. Depending on the ratio η₂/η₁, and the collision angle between the solitons, the magnitude of the phase shift can be varied within a reasonable range, for example from 180° to 40°. The analysis of the effect performed by the finite-difference beam-propagation method has shown that it is insensitive to the initial phase difference between the incident beams (δ_i), even in the case when η ₁≠η₂. It has been demonstrated that the phenomenon can be used for all-optical three-soliton logic elements, which are capable of providing more than 3-dB signal amplification and possess bi -independent output characteristics     

Microwave beam imaging by recombination continuum from the positive column of gas discharge in a cesium vapor-xenon mixture

A new sensitive method for imaging of the spatial distribution of microwave intensity is proposed. The method is based on the imaging of the 6P-recombination continuum of cesium, emitted from a nonequilibrium plasma of the positive column of gas discharge in a cesium vapor-xenon mixture. It is demonstrated that the spatial distribution of intensity of 35-GHz microwave radiation measured by this method in a focal plane of a lens well coincides with the pattern obtained with the aid of a movable microwave detector. The time resolution of the proposed microwave imaging system reaches 1 ms.     

Analytic Methods of Calculation of the Contact Interaction of Thin-Walled Structural Elements (Review)

We describe main models and methods for the calculation of contact rigidity and wear resistance of friction couples using thin-walled structural elements such as beams, plates, or shells. We analyze certain specific features of their contact interaction on the basis of theories describing stress-strain state. We also consider mathematical models of the wear of junctions that take into account the frictional heating of contacting surfaces and anisotropy of their properties. A series of theoretical calculations is corroborated experimentally.     

The role of hydrodynamic stress on the phenotypic characteristics of single and binary biofilms of Pseudomonas fluorescens.

This study investigates the phenotype of turbulent (Re = 5,200) and laminar (Re = 2,000) flow-generated Pseudomonas fluorescens biofilms. Three P. fluorescens strains, the type strain ATCC 13525 and two strains isolated from an industrial processing plant, D3-348 and D3-350, were used throughout this study. The isolated strains were used to form single and binary biofilms. The biofilm physiology (metabolic activity, cellular density, mass, extracellular polymeric substances, structural characteristics and outer membrane proteins [OMP] expression) was compared. The results indicate that, for every situation, turbulent flow-generated biofilms were more active (p < 0.05), had more mass per cm(2) (p < 0.05), a higher cellular density (p < 0.05), distinct morphology, similar matrix proteins (p > 0.1) and identical (isolated strains -single and binary biofilms) and higher (type strain) matrix polysaccharides contents (p < 0.05) than laminar flow-generated biofilms. Flow-generated biofilms formed by the type strain revealed a considerably higher cellular density and amount of matrix polysaccharides than single and binary biofilms formed by the isolated strains (p < 0.05). Similar OMP expression was detected for the several single strains and for the binary situation, not dependent on the hydrodynamic conditions. Binary biofilms revealed an equal coexistence of the isolated strains with apparent neutral interactions. In summary, the biofilms formed by the type strain represent, apparently, the worst situation in a context of control. The results obtained clearly illustrate the importance of considering strain variation and hydrodynamics in biofilm development, and complement previous studies which have focused on physical aspects of structural and density differences.