A manufacturing XML schema definition and its application to a data management system on the shop floor

Digitization for sharing knowledge on the shop floor in the machinery industry has been given much attention recently. To help engineers use digitization practically and efficiently, this paper proposes a method based on manufacturing case data that has a direct relation to manufacturing operations. The data are represented in XML schema, as it can be easily applied to Web-based systems on the shop floor. The definitions were made for eight manufacturing methods including machining and welding. The derived definitions consist of four divisions of metadata, work-piece, process and evaluation. Three divisions except for the “process” division are common to the manufacturing methods. The average number of elements for a manufacturing method is about 200. The represented schema is also used to convey knowledge such as operation standards and manufacturing troubleshooting on the shop floor. Using the definitions, a data management system is developed. It is a Web-based Q&A system, in which the engineers specify the manufacturing case data mainly by selecting from the candidates. Then, the system fills in the blank portions and/or shows messages to help complete the case data. The proposed method is evaluated through practical scenarios of arc welding and machining.     

Factors associated with serum magnesium and vascular stiffness in maintenance hemodialysis patients

Introduction : We evaluated the associated factors of serum magnesium in patients on maintenance hemodialysis (MHD). Furthermore, we evaluated the relationship between low serum magnesium and arteriosclerosis in these patients. Methods : In 129 patients on MHD, we evaluated the blood levels of magnesium, brachial‐ankle pulse wave velocity (ba‐PWV), ankle‐brachial index (ABI), and intima‐media thickness of the common carotid artery (IMT). Findings : In MHD patients, the serum level of magnesium was significantly correlated with age, calcium, TNF‐α, albumin, and ba‐PWV but not with ABI or IMT. In the multiple regression analysis, albumin (P = 0.0001, β = 0.31) and calcium (P = 0.029, β = 0.18) were selected as significant predictors of the magnesium level in MHD patients. Furthermore, the serum level of magnesium, as well as systolic blood pressure (P = 0.0001, β = 0.32) and age (P = 0.005, β = 0.25), were selected as significant (P = 0.012, β = ?0.22) predictors of ba‐PWV in MHD patients. Discussion : In MHD patients, the serum magnesium level was associated with the serum levels of calcium and albumin. Furthermore, a low serum magnesium level in MHD patients was associated with the index of vascular stiffness.     

Optimizing time histograms for non-Poissonian spike trains

The time histogram is a fundamental tool for representing the inhomogeneous density of event occurrences such as neuronal firings. The shape of a histogram critically depends on the size of the bins that partition the time axis. In most neurophysiological studies, however, researchers have arbitrarily selected the bin size when analyzing fluctuations in neuronal activity. A rigorous method for selecting the appropriate bin size was recently derived so that the mean integrated squared error between the time histogram and the unknown underlying rate is minimized (Shimazaki & Shinomoto, 2007 ). This derivation assumes that spikes are independently drawn from a given rate. However, in practice, biological neurons express non-Poissonian features in their firing patterns, such that the spike occurrence depends on the preceding spikes, which inevitably deteriorate the optimization. In this letter, we revise the method for selecting the bin size by considering the possible non-Poissonian features. Improvement in the goodness of fit of the time histogram is assessed and confirmed by numerically simulated non-Poissonian spike trains derived from the given fluctuating rate. For some experimental data, the revised algorithm transforms the shape of the time histogram from the Poissonian optimization method.     

Probabilistic nearest neighbor query processing on distributed uncertain data

A nearest neighbor (NN) query, which returns the most similar object to a user-specified query object, plays an important role in a wide range of applications and hence has received considerable attention. In many such applications, e.g., sensor data collection and location-based services, objects are inherently uncertain. Furthermore, due to the ever increasing generation of massive datasets, the importance of distributed databases, which deal with such data objects, has been growing. One emerging challenge is to efficiently process probabilistic NN queries over distributed uncertain databases. The straightforward approach, that each local site forwards its own database to the central server, is communication-expensive, so we have to minimize communication cost for the NN object retrieval. In this paper, we focus on two important queries, namely top-k probable NN queries and probabilistic star queries, and propose efficient algorithms to process them over distributed uncertain databases. Extensive experiments on both real and synthetic data have demonstrated that our algorithms significantly reduce communication cost.     

Design and implementation of a vehicle interface protocol using an IEEE 1394 network

A wide variety of in-vehicle devices such as camera sensors, navigation systems, telematics and communication equipments have been incorporated into a vehicle to realize Intelligent Transport Systems (ITS) applications. Because an efficient standardized network is required, ITS Data Bus (IDB) has been discussed to carry high-speed multimedia data for audio, video and other real-time ITS applications. For connecting devices in a standardized manner, the IDB network has architecture with a gateway called vehicle interface which is located between automaker’s proprietary network and the standardized IDB network. IEEE 1394 (also known as iLink or FireWire), which can transport multimedia data for consumer electronics, is a good candidate for IDB network. In this paper, we analyze the issues for existing AV/C protocol (application layer protocol over IEEE 1394) to comprise the IDB network. In addition, we designed and implemented the vehicle interface protocol as a higher layer of IEEE 1394 to address the AV/C protocol issues for realizing the whole IDB network architecture.     

A study on a quantum-inspired evolutionary algorithm based on pair swap

A quantum-inspired evolutionary algorithm (QEA) is proposed as a stochastic algorithm to perform combinatorial optimization problems. The QEA is evolutionary computation that uses quantum bits and superposition states in quantum computation. Although the QEA is a coarse-grained parallel algorithm, it involves many parameters that must be adjusted manually. This paper proposes a new method, named pair swap, which exchanges each best solution information between two individuals instead of migration in the QEA. Experimental results show that our proposed method is a simpler algorithm and can find a high quality solution in the 0-1 knapsack problem. This work was presented in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Thermomechanical behavior of Ti-Ni shape memory alloy films deposited by DC magnetron sputtering

In this study, thermomechanical properties of titanium-nickel (Ti-Ni) shape memory alloy (SMA) films are investigated in order to derive constitutive relations. Ti-Ni SMA films, deposited by DC magnetron sputtering under controlled film composition, are characterized by uniaxial tensile tests. At room temperature (R.T.), Ti-Ni films having Ti contents less than 50 at% exhibit superelastic behavior, and those having Ti contents greater than 50 at% exhibit shape memory behavior. However, the Ni—53.2 at% Ti film fractured at a tensile strain of 0.8% because of an increase in brittleness with increasing Ti content. At elevated temperatures, Ti-Ni films having Ti contents of 50.2 to 52.6 at% undergo phase change from martensite to austenite. The Young's modulus of the Ti-Ni films depends on temperature at each phase, regardless of film composition. Film composition does, however, affect the measured material constants b_A, b_M, c_A, and c_M. Stress-strain curves calculated from the constructed constitutive equation closely agree with those obtained from tensile tests, for both the martensite and austenite phases. The constitutive equations are expected to find great utility in the design of Ti-Ni film-actuated microelectromechanical systems (MEMS).     

气体辅助法陶瓷薄膜的制备

Ceramics （alumina） coating on sevaral materials has been successfully achieved at room temperature by gas - assisted deposition （ GAD） technique. In the GAD process the alumina powder was accelerated by jet flow with velocity of - 1000 m/s and impaeted to a substrate, thereby a fiat and dense film was deposited up to 10 μm on the substrate without arty additional heating. The crystal structttre of the alumina in an obtained GAD films seemed as amorphous like. The crystalline phase was recovered by post nnnenling at 1 300 ℃ , however, the matrix resulted in a hollow structure.     

Novel screen technology for high‐contrast front‐projection display by controlling ambient‐light reflection

Abstract— One problem with front‐projection displays is that the screen contrast ratio decreases in bright ambient light. In this paper, we propose a new front‐projection display system that incorporates the control of reflection of ambient light in the screen design, providing a high contrast ratio even in a brightly lit room.     

Human-like natural behavior generation based on involuntary motions for humanoid robots

Human behaviors consist of both voluntary and involuntary motions. Almost all behaviors of task-oriented robots, however, consist solely of voluntary motions. Involuntary motions are important for generating natural motions like those of humans. Thus, we propose a natural behavior generation method for humanoid robots that is a hybrid generation between voluntary and involuntary motions. The key idea of our method is to control robots with a hybrid controller that combines the functions of a communication behavior controller and body balancing controllers. We also develop a wheeled inverted pendulum type of humanoid robot, named “Robovie-III”, in order to generate involuntary motions like oscillation. By applying our method to this robot and conducting preliminary experiments, we verify its validity. Experimental results show that the robot generates both voluntary and involuntary motions.