Study on FBR core concepts to increase proliferation resistance of plutonium in LWR–FBR transition period

The possibility to enhance proliferation resistance of discharged plutonium in fast breeder reactor (FBR) has been investigated in terms of reactor core-design aspects. The provisional target for proliferation resistance measures based on Saito's attractiveness (ATTR) is defined. It is found that a few percent of plutonium loading and/or Am/Cm loading, which come from various types of spent fuel, might satisfy the provisional target with a minimum impact on the core neutronic performances. On Am/Cm loading core, decay heat constraints for fuel-handling aspects are found to be important and should be considered in design. There is not significant change on the current developing scenarios for light water reactor–FBR transition period by applying the measures based on Saito's ATTR. It is found that applying Kimura's proposal, 15% ²³⁸Pu content requires about 7% MA loading fraction both in the core and the blanket, and it only can be applied at limited case. The period to consume minor actinides is shorter than to consume plutonium.     

Dual-Function Semaphorin 4D Released by Platelets: Suppression of Osteoblastogenesis and Promotion of Osteoclastogenesis

Effects of the antiosteoblastogenesis factor Semaphorin 4D (Sema4D), expressed by thrombin-activated platelets (TPs), on osteoblastogenesis, as well as osteoclastogenesis, were investigated in vitro. Intact platelets released both Sema4D and IGF-1. However, in response to stimulation with thrombin, platelets upregulated the release of Sema4D, but not IGF-1. Anti-Sema4D-neutralizing monoclonal antibody (mAb) upregulated TP-mediated osteoblastogenesis in MC3T3-E1 osteoblast precursors. MC3T3-E1 cells exposed to TPs induced phosphorylation of Akt and ERK further upregulated by the addition of anti-sema4D-mAb, suggesting the suppressive effects of TP-expressing Sema4D on osteoblastogenesis. On the other hand, TPs promoted RANKL-mediated osteoclastogenesis in the primary culture of bone-marrow-derived mononuclear cells (BMMCs). Among the known three receptors of Sema4D, including Plexin B1, Plexin B2 and CD72, little Plexin B2 was detected, and no Plexin B1 was detected, but a high level of CD72 mRNA was detected in RANKL-stimulated BMMCs by qPCR. Both anti-Sema4D-mAb and anti-CD72-mAb suppressed RANKL-induced osteoclast formation and bone resorptive activity, suggesting that Sema4D released by TPs promotes osteoclastogenesis via ligation to a CD72 receptor. This study demonstrated that Sema4D released by TPs suppresses osteogenic activity and promotes osteoclastogenesis, suggesting the novel property of platelets in bone-remodeling processes.     

Diesel emission control system using combined process of nonthermal plasma and exhaust gas components' recirculation

A NO_x aftertreatment system, using nonthermal plasma (NTP) reduction and exhaust gas components' recirculation, is investigated. A pilot-scale system is applied to a stationary diesel engine. In this system, NO_x is first removed by adsorption, and subsequently, the adsorbent is regenerated by thermal desorption. NO_x desorbed is reduced by using nitrogen NTP. Moreover, NO_x, CO₂, and water vapor recirculated into the engine intake reduce NO_x. In this study, approximately 57% of the NO_x of the exhaust (NO_x: 240-325 ppm, flow rate = 300 NL/min) can be continuously treated for 58 h. A system energy efficiency of 120 g (NO₂)/kWh is obtained.     

Partial discharge measurements in SF6 and air usingphase-resolved pulse-height analysis

Carries out a study on partial discharge (PD) phenomena in SF₆ gas and tries to construct a diagnostic system capable of separating noise from observed PD signals for assessing the condition of insulation performance in power apparatus. The authors have constructed a computer-aided PD measuring system which permits a time-sequential data acquisition and phase-resolved pulse height analysis. Using the PD measurement system, the authors measured 60 Hz AC PD in SF₆ gas and in air at atmospheric pressure for needle-plane electrodes with three different radii at the tip of the needle, 3, 30 and 500 μm. They proposed particular PD statistical parameters, unbalance ratios U _T and U_q of the pulse repetition rate and average of charge, respectively, between positive and negative PD pulses occurring per cycle; these parameters proved to be good indicators to distinguish PD occurring in SF₆ from that in air. The mechanism of PD inception was also discussed     

Electrode conditioning characteristics in vacuum under impulse voltage application in nonuniform electric field

In this paper, we quantitatively investigated the impulse conditioning mechanism under nonuniform electric field electrodes in a vacuum. A negative standard lightning impulse voltage was applied between rod and plane electrodes whose materials were Cu-Cr, stainless steel and Cu and the gap lengths were d=5 and 10 mm, respectively. Experimental results revealed the transition of the breakdown (BD) sport region on the rod electrode and the corresponding BD field strength in the conditioning process. As a result, we found that the BD spot region started at the tip of the rod electrode and moved to the wider region of the rod electrode with lower electric field as the shots of the voltage application increased before the saturation of the BD voltage. Finally, by analyzing the results with an electric field strength, we propose that "the conditioning degree" along the electrode surface distributed directly proportional to the electric field distribution under a nonuniform electric field in a vacuum, irrespective of the electrode materials     

Simultaneous removal of NO/sub x/, SO/sub x/, and CO/sub 2/ at elevated temperature using a plasma-chemical hybrid process

In previous studies, the authors confirmed that the plasma-chemical combined hybrid process for controlling NO flue gas emission was extremely effective and economical in comparison with the conventional selective catalytic reduction (SCR) system and other technologies. In the present study, we carried out experiments on the simultaneous removal of NO/sub x/ and SO/sub x/ at elevated temperature using the plasma-chemical hybrid process. A series of experiments was performed to quantify all the reaction byproducts such as N/sub 2/O, CO, HNO/sub 2/, HNO/sub 3/, NO/sub 3//sup -/, and SO/sub 4//sup -/ to evaluate the simultaneous NO/sub x/ and SO/sub x/ removal efficiency. The oxidation from NO to NO/sub 2/ without decreasing NO/sub x/ concentration (i.e., minimum reaction byproducts) and with least power consumption is the key for the optimum operation of the plasma reactor. The produced NO/sub 2/ was totally converted to N/sub 2/ and Na/sub 2/SO/sub 4/ with Na/sub 2/SO/sub 3/ or Na/sub 2/S with and without NaOH using the barrier-type packed-bed plasma reactor followed by the packed-column chemical reactor. The NO/sub 2/ reduction was more effective for Na/sub 2/S than Na/sub 2/SO/sub 3/ but produces H/sub 2/S with Na/sub 2/S. For both cases at least five times the stoichiometric amount of chemicals were required for complete NO/sub 2/ reduction. Nearly 100% of NO/sub x/ and SO /sub 2/ and 40% Of CO/sub 2/ simultaneous removal were achieved with less than 5 ppm of N/sub 2/O and CO. The operating cost was less than 1/4 the SCR process. The additional SO/sub 2/ treatment system can be eliminated.     

Partial discharge inception characteristics under butt gap condition in liquid nitrogen/ PPLP/sup /spl reg// composite insulation system for high temperature superconducting cable

The partial discharge (PD) inception characteristics are studied in liquid nitrogen (LN/sub 2/)/polypropylene laminated paper (PPLP/sup /spl reg//) composite insulation system for high temperature superconducting (HTS) cable. Experimental results revealed that the magnitude of the initial PD increased as the PD inception electric field strength was increased, because the injected energy increased. Initial PD was generated at the first and third quadrant of applied AC voltage phase. The probability of initial PD at the positive and negative voltage phase was almost the same. The reason is because liquid nitrogen is a nonpolar molecule and we used symmetric electrode configuration with uniform electric field distribution. Finally, it was pointed out that PD inception electric field strength (PDIE) depended on the volume of the butt gap because of the increasing probability of weak points of electrical insulation, and PDIE linearly decreased with increasing stressed volume of the butt gap in the log-log scale.