Projecting demand and supply of forest biomass for heating in Norway

This paper assesses the increase in demand and supply for forest biomass for heating in Norway in 2020. By then there is a political aim to double the national production of bioenergy from the level in 2008. The competitiveness of woody biomass in central and district heating is analyzed in a model selecting the least-cost heating technology and scale in municipalities given a set of constraints and under different fuels price scenarios. The supply of forest biomass from roundwood is estimated based on data of forest inventories combined with elasticities regarding price and standing volumes. The supply of biomass from harvesting residues is estimated in an engineering approach based on data from the national forest inventories and roundwood harvest. The results show how the production of bioenergy is affected by changes in energy prices and support schemes for bioenergy. One conclusion from the analyses is that the government target of 14 TWh more bioenergy by 2020 is not likely to be met by current technologies and policy incentives. The contribution of the analysis is the detailed presentation of the heat market potentials and technology choices combined with supply functions for both roundwood and harvesting residues.     

A critical approach to viscosity index

The viscosity index (VI) is a useful tool for lubricant users and refiners, since it is a measure of the effect of temperature changes on the viscosity of the oil. However, it was found that the viscosity index does not correlate with the flow activation energy E_a, which is the theoretically defined dependence of the viscosity on temperature. In this way, two oils may have the same flow activation energy but a viscosity index varying by up to 120. We therefore believe that the VI does not always give a proper representation of the effect of temperature on the kinematic viscosity.¹³C NMR spectroscopy was used to identify the molecules with a high VI. Twenty different oil samples produced from eight different vacuum gas oils with viscosity indices ranging from −104 to 146 were analyzed and key parameters identified for high VI molecules: long alkyl chains, methyl branching in the centre of the molecule, low content of aromatic compounds, no ethyl branching and no tertiary carbons.A correlation based on four selected peaks was developed, giving a very good prediction of the viscosity index.     

On the usefulness of non-gradient approaches in topology optimization

Topology optimization is a highly developed tool for structural design and is by now being extensively used in mechanical, automotive and aerospace industries throughout the world. Gradient-based topology optimization algorithms may efficiently solve fine-resolution problems with thousands and up to millions of design variables using a few hundred (finite element) function evaluations (and even less than 50 in some commercial codes). Nevertheless, non-gradient topology optimization approaches that require orders of magnitude more function evaluations for extremely low resolution examples keep appearing in the literature. This forum article discusses the practical and scientific relevance of publishing papers that use immense computational resources for solving simple problems for which there already exist efficient solution techniques.     

Development and validation of an extensive growth and growth boundary model for psychrotolerant Lactobacillus spp. in seafood and meat products

A new and extensive growth and growth boundary model for psychrotolerant Lactobacillus spp. was developed and validated for processed and unprocessed products of seafood and meat. The new model was developed by refitting and expanding an existing cardinal parameter model for growth and the growth boundary of lactic acid bacteria (LAB) in processed seafood (O. Mejlholm and P. Dalgaard, J. Food Prot. 70. 2485–2497, 2007). Initially, to estimate values for the maximum specific growth rate at the reference temperature of 25 °C (μ_ref) and the theoretical minimum temperature that prevents growth of psychrotolerant LAB (T_min), the existing LAB model was refitted to data from experiments with seafood and meat products reported not to include nitrite or any of the four organic acids evaluated in the present study. Next, dimensionless terms modelling the antimicrobial effect of nitrite, and acetic, benzoic, citric and sorbic acids on growth of Lactobacillus sakei were added to the refitted model, together with minimum inhibitory concentrations determined for the five environmental parameters. The new model including the effect of 12 environmental parameters, as well as their interactive effects, was successfully validated using 229 growth rates (μ_max values) for psychrotolerant Lactobacillus spp. in seafood and meat products. Average bias and accuracy factor values of 1.08 and 1.27, respectively, were obtained when observed and predicted μ_max values of psychrotolerant Lactobacillus spp. were compared. Thus, on average μ_max values were only overestimated by 8%. The performance of the new model was equally good for seafood and meat products, and the importance of including the effect of acetic, benzoic, citric and sorbic acids and to a lesser extent nitrite in order to accurately predict growth of psychrotolerant Lactobacillus spp. was clearly demonstrated. The new model can be used to predict growth of psychrotolerant Lactobacillus spp. in seafood and meat products e.g. prediction of the time to a critical cell concentration of bacteria is considered useful for establishing the shelf life. In addition, the high number of environmental parameters included in the new model makes it flexible and suitable for product development as the effect of substituting one combination of preservatives with another can be predicted. In general, the performance of the new model was unacceptable for other types of LAB including Carnobacterium spp., Leuconostoc spp. and Weissella spp.     

Simulation of residual stresses at holes in tempered glass: a parametric study

This work presents a full 3D numerical study of the residual stresses in tempered (toughened) glass near holes using Narayanaswamy’s model for the tempering process. It is the objective of the paper to elucidate the influence on the minimal residual compressive stresses at holes from variations in: the far-field stress, plate thickness, hole diameter and the interaction between holes and edges and corners. The work presents novel results for the sensitivity of the residual stresses to geometric features and provides a design tool for estimating residual stresses at holes for different geometries. An example of how to extrapolate the results in terms of far-field stresses is given.     

Evaluation of trainees' stay in general practice by the young physicians and their tutors

In 1991 a new reform for postgraduate trainees was introduced in Denmark. Since the reform all young doctors-as a compulsory part of their vocational training-have had to work for six months as general practice trainees, no matter their wishes for future specialization. The reform furthermore led to the general practice trainees being considerably younger than previously-the average length of postgraduate experience before working as a trainee declined from six to seven years to one to two years. In this light an investigation was conducted from August 1992 to July 1993. Seven hundred and fifty-eight questionnaires were sent to general practice trainees and their tutors in Denmark. Ninety-five percent of the questionnaires were returned, thus it was possible to evaluate the new compulsory training in general practice. In conclusion, the main part of the trainees had a positive assessment of the work conditions in general practice. However, a large part of the trainees indicated that their tutor doctors had set aside too short a time for supervision.     

People''s clothing behaviour according to external weather and indoor environment

In prehistoric times man wore furs of animals to protect himself from the cold. Successively over the centuries clothing has become also a tool to distinguish ourselves in society. Clothing has in addition an important impact on people's perception of the indoor environment.

Clothing behaviour has been analysed by investigating the external and indoor parameters that motivate people's choice of clothing. Based on two existing databases, two types of buildings have been investigated: air-conditioned and naturally ventilated (NV) buildings. The impact of outdoor temperature on people's clothing selection has been considered. The outdoor temperature at 6 a.m. seems to affect people's choice of clothes the most. Gender does not significantly affect the selection of clothing insulation.

Latitude has also been investigated and a good correlation has been found between clothing insulation and external temperature in the ranges 20°–40° and −20° to −40° for NV buildings.

Indoor air temperature does not seem to influence the clothing choice early in the morning but it does seem to influence the change of clothing during the day, if this is authorized, in workplaces in NV buildings. Such action can be termed “clothing adjustment” during the day.

Some computer simulations on a test reference year have been carried out for a typical air-conditioned office to analyse a person's comfort when wearing different clothes. It is possible to see that in air-conditioned buildings a variation of 0.1 clo is sufficient to change totally the comfort evaluation. It is evident that further studies are needed in this field.     

Topology optimization of periodic microstructures with a penalization of highly localized buckling modes

The problem of determining highly localized buckling modes in perfectly periodic cellular microstructures of infinite extent is addressed. A double scale asymptotic technique is applied to the linearized stability problem for a periodic structure built from linearly elastic microstructures. The obtained stability condition for the microscale level is then used to establish a comparative analysis between different material distributions in the base cell subjected to the same strain field at the macroscale level. The idea is illustrated by some two‐dimensional finite element examples and used to design materials with optimal elastic properties that are less prone to localized instability in the form of local buckling modes at the scale of the microstructure. Copyright © 2002 John Wiley & Sons, Ltd.     

Observations on the electrical resistivity of steel fibre reinforced concrete

Steel fibre reinforced concrete (SFRC) is in many ways a well-known construction material, and its use has gradually increased over the last decades. The mechanical properties of SFRC are well described based on the theories of fracture mechanics. However, knowledge on other material properties, including the electrical resistivity, is sparse. Among others, the electrical resistivity of concrete has an effect on the corrosion process of possible embedded bar reinforcement and transfer of stray current. The present paper provides experimental results concerning the influence of the fibre volume fraction and the moisture content of the SFRC on its electrical resistivity. The electrical resistivity was measured by alternating current (AC) at 126 Hz. Moreover, an analytical model for the prediction of the electrical resistivity of SFRC is presented. The analytical model is capable of predicting the observed correlation between the fibre volume fraction and the electrical resistivity of the composite (the SFRC) for conductive fibres and moisture saturated concrete. This indicates that the steel fibres were conducting when measuring the electrical resistivity by AC at 126 Hz. For partly saturated concrete the model underestimated the influence of the addition of fibres. The results indicate that the addition of steel fibres reduce the electrical resistivity of concrete if the fibres are conductive. This represents a hypothetical case where all fibres are depassivated (corroding) which was created to obtain a conservative estimate on the influence of fibres on the electrical resistivity of concrete. It was observed that within typical ranges of variation the influence of the moisture content on the electrical resistivity was larger than the effect of addition of conductive steel fibres, but also that the relative impact on the electrical resistivity due to conductive steel fibres increased when the moisture content of the concrete was reduced.