The optical absorption edge of rare earth sesquisulfides and alkaline earth - rare earth sulfides

Optical band gaps were measured by diffuse reflectance spectroscopy on a series of Ln₂S₃ compounds of α, δ, ε and τ structure types and on a series of ternary sulfides MLn₂S₄ (M = Sr, Cd, Mg) of Th₃P₄, CaFe₂O₄ and spinel structure types. Sharp absorption edges are observed with band gaps ranging from 2.2 to 3.5 eV. Systematic changes occur with rare earth radii. Analysis of some of the absorption edges suggests direct forbidden transitions.     

Flow stress,subgrain size,and subgrain stability at elevated temperature

Well defined subgrain boundaries dominate the microstructural changes occurring during plastic flow of polycrystalline metals at elevated temperature. The quantitative influence of subgrain size on elevated-temperature plastic flow is considered. Based on the results of tests under constant-stress and constant-structure conditions, an equation is developed which predicts the creep rate as a function of subgrain size, stress, diffusion coefficient, and elastic modulus. In general, the subgrain size is a unique function of the current modulus-compensated flow stress, but if fine subgrains can be introduced and stabilized, large increases in creep strength may result. The applicability of the phenomenological relation developed to the behavior of dispersion-strengthened materials (where the second-phase particles may predetermine the effective subgrain size) is discussed. When subgrain effects are included, it is shown that the creep rate is less dependent on stacking fault energy than has been previously thought. This paper is based on a presentation made at a symposium on “Mechanical-Thermal Processing and Dislocation Substructure Strengthening,” held at the Annual Meeting in Las Vegas, Nevada, on February 23, 1976, under the sponsorship of the TMS/IMD Heat Treating Committee.     

Volt-Watt Sensitivity of Semimetal <Emphasis Type="Italic">BiSb</Emphasis> Film Thermocouple Sensors in the 8 mm Wavelength Range

The paper considers the experimental and analytical data on volt-watt characteristics of metal-semimetal BiSb film point contacts in 8 millimeter wavelength range. Analytical expressions have been obtained for the volt-watt sensitivity and the resistance of the metal-semimetal BiSb film point contacts. A thermoelectric millimeter wave range detector has been designed on the basis of the sensors; the performance is illustrated by experimentally determined volt-watt relations.     

Evaluation of a novel method of noise reduction using computer-simulated mammograms

A novel method of noise reduction has been tested for mammography using computer-simulated images for which the truth is known exactly. This method is based on comparing two images. The images are compared at different scales, using a cross-correlation function as a measure of similarity to define the image modifications in the wavelet domain. The computer-simulated images were calculated for noise-free primary radiation using a quasi-realistic voxel phantom. Two images corresponding to slightly different geometry were produced. Gaussian noise was added with certain properties to simulate quantum noise. The added noise could be reduced by >70% using the proposed method without any noticeable corruption of the structures. It is possible to save 50% dose in mammography by producing two images (each 25% of the dose for a standard mammogram). Additionally, a reduction of the anatomical noise and, therefore, better detection rates of breast cancer in mammography are possible.     

Nanoexplosion synthesis of multimetal oxide ceramic nanopowders

Herein we demonstrate a unique processing technique for engineering multicomponent ceramic nanopowders with precise morphologies by "nanoblast" calcination/deagglomeration. Multiple "nanoexplosions" of C(3)H(6)N(6)O(6) nanoparticles embedded in preliminary engineered nanoreactors break apart the agglomerates because of the highly energetic impacts of the blast waves. Also, the solid-solubility of one component into the other is enhanced by the extremely high local temperature generated during the nanoexplosions. We applied this technique to produce nanosized agglomerate-free ceria-gadolinia solid solution powder with an average aggregate size of 42 nm. The described method opens the door to the synthesis of a wide range of multimetal oxide ceramic and metal-ceramic composite nanopowders, with precise stoichiometries and uniform morphologies.     

Electrochemically reduced titanocene dichloride as a catalyst of reductive dehalogenation of organic halides

We have studied a reaction between the reduced form of titanocene dichloride (Cp₂TiCl₂) and a group of organic halides: benzyl derivatives (4-XC₆H₄CH₂Cl, X = H, NO₂, CH₃; 4-XC₆H₄CH₂Br, X = H, NO₂, PhC(O); 4-XC₆H₄CH₂SCN, X = H, NO₂) as well as three aryl halides (4-NO₂C₆H₄Hal, Hal = Cl, Br; 4-CH₃O-C₆H₄Cl). It has been shown that the electrochemical reduction of Cp₂TiCl₂ in the presence of these benzyl halides leads to a catalytic cycle resulting in the reductive dehalogenation of these organic substrates to yield mostly corresponding toluene derivatives as the main product. No dehalogenation has been observed for aryl derivatives. Based on electrochemical data and digital simulation, possible schemes of the catalytic process have been outlined. For non-substituted benzyl halides halogen atom abstraction is a key step. For the reaction of nitrobenzyl halides the complexation of Ti(III) species with the nitro group takes place, with the electron transfer from Ti(III) to this group (owing to its highest coefficient in LUMO of the nitro benzyl halide) followed by an intramolecular dissociative electron redistribution in the course of the heterolytic CHal bond cleavage.The results for reduced titanocene dichloride centers immobilized inside a polymer film showed that the catalytic reductive dehalogenation of the p-nitrobenzyl chloride does occur but with a low efficiency because of the partial deactivation of the film due to the blocking of the electron charge transport between the electrode and catalytic centers.     

Novel heterometallic Cu(II)/Cr(III) complex with unique open-chain N-ligand produced in conditions of direct template synthesis

The one-pot self-assembly reaction of copper powder, Reineckes salt, acetone and tris(2-aminoethyl)amine (tren) in dmso affords to obtain a heterometallic compound [Cu(trenac)][Cr(NCS)₄(NH₃)₂](NCS) · 6dmso with novel Schiff-base ligand N-(2-{[(1E)-3-amino-1,3-dimethylbutylidene]amino}ethyl)-N-(2-aminoethyl)ethane-1,2-diamine (trenac). The ligand trenac is generated by metal-directed condensation of tren, acetone and ammonia, formed during the synthetic procedure. X-ray structural investigations showed that the complex consists of [Cu(trenac)]²⁺ cations, anions of the Reineckes salt [Cr(NCS)₄(NH₃)₂]^?, uncoordinated thiocyanate groups and dmso molecules, which are held together by electrostatic forces and hydrogen-bonded interactions. The compound was characterized by EPR spectroscopic and magnetic susceptibility measurements.     

Formation Energies of Antiphase Boundaries in GaAs and GaP: An ab Initio Study

Electronic and structural properties of antiphase boundaries in group III-V semiconductor compounds have been receiving increased attention due to the potential to integration of optically-active III-V heterostructures on silicon or germanium substrates. The formation energies of {110}, {111}, {112}, and {113} antiphase boundaries in GaAs and GaP were studied theoretically using a full-potential linearized augmented plane-wave density-functional approach. Results of the study reveal that the stoichiometric {110} boundaries are the most energetically favorable in both compounds. The specific formation energy γ of the remaining antiphase boundaries increases in the order of γ_{113} ≈ γ_{112} < γ_{111}, which suggests {113} and {112} as possible planes for faceting and annihilation of antiphase boundaries in GaAs and GaP.     

Study of the filter cake formed due to the sedimentation of monodispersed and bidispersed particles using discrete element method–computational fluid dynamics simulations

This study aims to investigate the sedimentation and the consolidation of the packed bed/cake formed due to the monodispersed and bidispersed particles under different flow conditions. Mutual interactions between the bidispersed particles and the liquid are considered by using a polydispersed drag model. The attractive force is considered by using the JKR model. Sensitivity of the void fraction of a sedimented packed bed/cake due to particle–particle interaction parameters is studied. Furthermore, the effect of the fluid flow is analyzed by performing the simulations in two stages. In the first stage, packed bed/cake is formed by the sedimentation of the particles in the absence of the fluid forces and in the second stage flow through the packed bed/cake is simulated by using the CFD coupled with the discrete element method. Based on the simulations, correlations between the sedimented and the consolidated void fractions are developed. © 2019 American Institute of Chemical Engineers AIChE J, 65: 1294–1303, 2019     

Protective Effect of Memantine on Bergmann Glia and Purkinje Cells Morphology in Optogenetic Model of Neurodegeneration in Mice

Spinocerebellar ataxias are a family of fatal inherited diseases affecting the brain. Although specific mutated proteins are different, they may have a common pathogenetic mechanism, such as insufficient glutamate clearance. This function fails in reactive glia, leading to excitotoxicity and overactivation of NMDA receptors. Therefore, NMDA receptor blockers could be considered for the management of excitotoxicity. One such drug, memantine, currently used for the treatment of Alzheimer’s disease, could potentially be used for the treatment of other forms of neurodegeneration, for example, spinocerebellar ataxias (SCA). We previously demonstrated close parallels between optogenetically induced cerebellar degeneration and SCA1. Here we induced reactive transformation of cerebellar Bergmann glia (BG) using this novel optogenetic approach and tested whether memantine could counteract changes in BG and Purkinje cell (PC) morphology and expression of the main glial glutamate transporter—excitatory amino acid transporter 1 (EAAT1). Reactive BG induced by chronic optogenetic stimulation presented increased GFAP immunoreactivity, increased thickness and decreased length of its processes. Oral memantine (~90 mg/kg/day for 4 days) prevented thickening of the processes (1.57 to 1.81 vs. 1.62 μm) and strongly antagonized light-induced reduction in their average length (186.0 to 150.8 vs. 171.9 μm). Memantine also prevented the loss of the key glial glutamate transporter EAAT1 on BG. Finally, memantine reduced the loss of PC (4.2 ± 0.2 to 3.2 ± 0.2 vs. 4.1 ± 0.3 cells per 100 μm of the PC layer). These results identify memantine as potential neuroprotective therapeutics for cerebellar ataxias.