Direct observation of liquid crystals using cryo‐TEM: Specimen preparation and low‐dose imaging

Liquid crystals (LCs) represent a challenging group of materials for direct transmission electron microscopy (TEM) studies due to the complications in specimen preparation and the severe radiation damage. In this paper, we summarize a series of specimen preparation methods, including thin film and cryo‐sectioning approaches, as a comprehensive toolset enabling high‐resolution direct cryo‐TEM observation of a broad range of LCs. We also present comparative analysis using cryo‐TEM and replica freeze‐fracture TEM on both thermotropic and lyotropic LCs. In addition to the revisits of previous practices, some new concepts are introduced, e.g., suspended thermotropic LC thin films, combined high‐pressure freezing and cryo‐sectioning of lyotropic LCs, and the complementary applications of direct TEM and indirect replica TEM techniques. The significance of subnanometer resolution cryo‐TEM observation is demonstrated in a few important issues in LC studies, including providing direct evidences for the existence of nanoscale smectic domains in nematic bent‐core thermotropic LCs, comprehensive understanding of the twist‐bend nematic phase, and probing the packing of columnar aggregates in lyotropic chromonic LCs. Direct TEM observation opens ways to a variety of TEM techniques, suggesting that TEM (replica, cryo, and in situ techniques), in general, may be a promising part of the solution to the lack of effective structural probe at the molecular scale in LC studies. Microsc. Res. Tech. 77:754–772, 2014. © 2014 Wiley Periodicals, Inc.     

Interactions of Chemically Synthesized Ferrihydrite Nanoparticles with Human Serum Transferrin: Insights from Fluorescence Spectroscopic Studies

Human serum transferrin (HST) is a glycoprotein involved in iron transport that may be a candidate for functionalized nanoparticles to bind and target cancer cells. In this study, the effects of the simple and doped with cobalt (Co) and copper (Cu) ferrihydrite nanoparticles (Fh-NPs, Cu-Fh-NPs, and Co-Fh-NPs) were studied by spectroscopic and molecular approaches. Fluorescence spectroscopy revealed a static quenching mechanism for all three types of Fh-NPs. All Fh-NPs interacted with HST with low affinity, and the binding was driven by hydrogen bonding and van der Waals forces for simple Fh-NPs and by hydrophobic interactions for Cu-Fh-NPs and Co-Fh-NPs binding, respectively. Of all samples, simple Fh-NPs bound the most to the HST binding site. Fluorescence resonance energy transfer (FRET) allowed the efficient determination of the energy transfer between HST and NPs and the distance at which the transfer takes place and confirmed the mechanism of quenching. The denaturation of the HST is an endothermic process, both in the case of apo HST and HST in the presence of the three types of Fh-NPs. Molecular docking studies revealed that Fh binds with a low affinity to HST (K_a = 9.17 × 10³ M⁻¹) in accord with the fluorescence results, where the interaction between simple Fh-NPs and HST was described by a binding constant of 9.54 × 10³ M⁻¹.     

The effect of growth atmosphere and Ir contamination on electric properties of La<Subscript>3</Subscript>Ta<Subscript>0.5</Subscript>Ga<Subscript>5.5</Subscript>O<Subscript>14</Subscript> single crystal grown by the floating zone and Czochralski method

The influence of growth atmosphere and Ir contamination on electrical resistivity of langatate (La₃Ta_0.5Ga_5.5O₁₄; LTG) was studied. LTG single crystals were grown via the Czochralski method under different oxygen partial pressures with Ir contamination from the Ir crucible. In addition, LTG crystals were grown by the floating zone method and they were not contaminated by Ir. The electrical resistivity and ionic transport number of these crystals were measured in the temperature range 300–1000°C. The conduction mechanism of LTG changed at about 720°C. At T < 720°C, electronic conduction was dominant, and the resistivity was affected by growth atmosphere as well as Ir contamination. In contrast, at T > 720°C, ionic conduction was dominant, and the resistivity was affected only by Ir contamination. In both temperature regions, Ir contamination decreased the resistivity by an order of magnitude.     

Phase Formation in Sintering of Materials Based on Silicon Nitride with Li2CO3 and AlN Additives

We have studied the phase formation processes occurring in sintering of materials based on silicon nitride with lithium carbonate and aluminum nitride or Al powder additives. We have studied samples of different compositions that were sintered at 1450, 1550, and 1750°C under a nitrogen atmosphere. We have established that the phase composition depends on the sintering temperature, the composition of the starting charge, and also the amount and the nature of the Al-containing additives.     

Patterning of Lyotropic Chromonic Liquid Crystals by Photoalignment with Photonic Metamasks

Controlling supramolecular self‐assembly in water‐based solutions is an important problem of interdisciplinary character that impacts the development of many functional materials and systems. Significant progress in aqueous self‐assembly and templating has been demonstrated by using lyotropic chromonic liquid crystals (LCLCs) as these materials show spontaneous orientational order caused by unidirectional stacking of plank‐like molecules into elongated aggregates. In this work, it is demonstrated that the alignment direction of chromonic assemblies can be patterned into complex spatially‐varying structures with very high micrometer‐scale precision. The approach uses photoalignment with light beams that exhibit a spatially‐varying direction of light polarization. The state of polarization is imprinted into a layer of photosensitive dye that is protected against dissolution into the LCLC by a liquid crystalline polymer layer. The demonstrated level of control over the spatial orientation of LCLC opens opportunities for engineering materials and devices for optical and biological applications.     

Enhancing the coverage of the urinary metabolome by sheathless capillary electrophoresis-mass spectrometry

Sheathless capillary electrophoresis-mass spectrometry (CE-MS), using a porous tip sprayer, is proposed for the first time for highly sensitive metabolic profiling of human urine. A representative metabolite mixture and human urine were used for evaluation of the sheathless CE-MS platform. For test compounds, relative standard deviations (RSDs) for migration times and peak areas were below 2% and 12%, respectively, and an injection volume of only ～8 nL resulted in detection limits between 11 and 120 nM. Approximately 900 molecular features were detected in human urine by sheathless CE-MS whereas about 300 molecular features were found with classical sheath-liquid CE-MS. This difference can probably be attributed to an improved ionization efficiency and increased sensitivity at low flow-rate conditions. The integration of transient-isotachophoresis (t-ITP) as an in-capillary preconcentration procedure in sheathless CE-MS further resulted in subnanomolar limits of detection for compounds of the metabolite mixture, and more than 1300 molecular features were observed in urine. Compared to the classical CE-MS approaches, the integration of t-ITP combined with the use of a sheathless interface provides up to 2 orders of magnitude sensitivity improvement. Hence, sheathless CE-MS can be used for in-depth metabolic profiling of biological samples, and we anticipate that this approach will yield unique information in the field of metabolomics.     

High-temperature strength behavior of tantalum diboride to 2000°C

This study investigated the high-temperature strength of spark plasma sintered tantalum diboride (TaB₂) for the first time. TaB₂ exhibited a unique elastic fracture behavior below 1900°C, unlike other transition metal diborides. The consolidation process involved spark plasma sintering at 2000–2200°C yielding dense TaB₂ samples. The flexural strength was measured at elevated temperatures up to 2000°C, showing a quite high flexural strength of 400 ± 20 MPa at 1900°C. These findings provide valuable insights into the high-temperature behavior of TaB₂, highlighting its potential for advanced applications.     

Pushing the Boundaries of Structural Heterogeneity with the Lipid A of Marine Bacteria Cellulophaga

Marine bacteria, which are often described as chemical gold, are considered an exceptional source of new therapeutics. Considerable research interest has been given to lipopolysaccharides (LPSs), the main components of the Gram-negative outer membrane. LPS and its lipid A portion from marine bacteria are known to exhibit a tricky chemistry that has been often associated with intriguing properties such as behaving as immune adjuvants or anti-sepsis molecules. In this scenario, we report the structural determination of the lipid A from three marine bacteria within the Cellulophaga genus, which showed to produce an extremely heterogenous blend of tetra- to hexa-acylated lipid A species, mostly carrying one phosphate and one D-mannose on the glucosamine disaccharide backbone. The ability of the three LPSs in activating TLR4 signaling revealed a weaker immunopotential by C. baltica NNO 15840^T and C. tyrosinoxydans EM41^T, while C. algicola ACAM 630^T behaved as a more potent TLR4 activator.     

Promising Antifungal and Antibacterial Agents Based on 5-Aryl-2,2′-bipyridines and Their Heteroligand Salicylate Metal Complexes: Synthesis,Bioevaluation, Molecular Docking

A series of new 5-aryl-2,2′-bipyridines and their (polyfluoro)salicylate complexes of Cu(II), Co(II) and Mn(II) were synthesized. Their antimicrobial activity was evaluated in vitro against six strains of Trichophytons, E. floccosum, M. canis, C. ablicans and Gram-negative bacteria N. gonorrhoeae. Among azo-ligands, Ph-bipy and Tol-bipy showed promising antifungal activity (minimum inhibitory concentration (MIC)<0.8–27 μM). Their antifungal action was found can be realized via binding Fe(III) ions. Tol-bipy suppressed growth of Gram-positive bacteria S. aureus, S. aureus MRSA and their monospecies biofilms (MIC 6–16 μM). Using molecular docking, the anti-staphylococcal action mechanism based on the inhibition of S. aureus DNA gyrase GyrB was proposed for the lead compounds. Among metal complexes, Cu(II) and Mn(II) complexes based on tetrafluorosalicylic acid and Tol-bipy or Ph-bipy had the high antifungal activity (MIC<0.24–32 μM). Mn(SalF₄−2H)₂(Tol-bipy)₂] suppressed the growth of seven Candida strains at MIC 12–24 μM. [Cu(Sal−2H)(Ph-bipy)] and [Cu(SalF₃−2H)(Ph-bipy)₂] showed the promising anti-gonorrhoeae activity (MIC 4.2–5.2 μM). (Cu(SalF_n−2H)(Tol-bipy)₂], [Cu(SalF₄−2H)(Ph-bipy)₂] and [Cu(SalF₃−2H)(Ph-bipy)₂]) were found active against the bacteria of S. aureus, S. aureus MRSA and their biofilms (MIC 2.4–41.4 μM). The most active compounds were tested for toxicity in vitro against human embryonic kidney (HEK-293) cells and in vivo experiments with CD-1 mice.     

Mithplatins: Mithramycin SA-Pt(II) Complex Conjugates for the Treatment of Platinum-Resistant Ovarian Cancers

DNA coordinating platinum (Pt) containing compounds cisplatin and carboplatin have been used for the treatment of ovarian cancer therapy for four decades. However, recurrent Pt-resistant cancers are a major cause of mortality. To combat Pt-resistant ovarian cancers, we designed and synthesized a conjugate of an anticancer drug mithramycin with a reactive Pt(II) bearing moiety, which we termed mithplatin. The conjugates displayed both the Mg²⁺-dependent noncovalent DNA binding characteristic of mithramycin and the covalent crosslinking to DNA of the Pt. The conjugate was three times as potent as cisplatin against ovarian cancer cells. The DNA lesions caused by the conjugate led to the generation of DNA double-strand breaks, as also observed with cisplatin. Nevertheless, the conjugate was highly active against both Pt-sensitive and Pt-resistant ovarian cancer cells. This study paves the way to developing mithplatins to combat Pt-resistant ovarian cancers.