SiO2(am)在FoCa粘土和MX-80粘土中扩散实验的模拟

不定形二氧化硅[Amorphous Silica，简称SiO2（am）]是高放废物玻璃固化体在处置后，发生降解的主要产物。对SiO2（am）在FbCa粘土和MX-80粘土柱中的扩散迁移进行了实验研究，结果显示：在粘土柱中有大量的SiO2（am）沉淀产生；土柱中总Si增加量与时间的关系基本为线性正相关关系。采用CRUNCH程序对上述扩散迁移实验进行了模拟，模拟内容包括：溶液和岩相中Si浓度变化、总的筋增加量与时间的关系以及实验期间孔隙率的变化；同时分析了有效扩散系数对结果的影响。结果说明，使用CRUNCH程序进行反应迁移模拟是可行的；但是实验中pH值测量时机不适当；另外由于土样本身Si含量较高，易对土柱总Si的分析结果产生影响，这些因素需进一步实验时改进。     

Choice of a pertinent color space for color texture characterization using parametric spectral analysis

This article presents a comparison of different color spaces including RGB, IHLS and L?a*b* for color texture characterization. This comparison is based on the fusion of the independent spatial structure and color feature cues. In IHLS and L*a*b*, two channel complex color images are created from the luminance and the chrominance values. For such images, two dimensional complex multichannel linear prediction models are used to perform parametric power spectrum estimation and the structure feature cues are computed from this estimated power spectrum. Quantitative comparison of auto spectra of luminance and combined chrominance channels for different color spaces is done. This comparison is based on the degree of decorrelation between luminance and chrominance information provided by different color space transformations. Three dimensional histograms are used as color feature cues. Then, to classify color textures, Kullback-Leibler divergence based symmetric distance measures are calculated for pure color, luminance structure and chrominance structure feature cues. Individual as well as combined effect of information from all feature cues on classification results is then compared for different color spaces and different color texture data sets. The proposed color texture classification method performs better than the state of the art methods in certain cases. The L*a*b* color space gives us a better characterization of the chrominance spatial structure as well as the overall spatial structure for all of the chosen data sets. Experimental results on pixel classification of color textures are also presented and discussed.     

A pseudojoint estimation of time delay and scale factor for M-wave analysis

A pseudojoint estimation of time scale and time delay between an unknown deterministic transient type signal and a reference signal is proposed. The method is based on the separation between the estimations of the two dependent parameters. The time autocorrelation function (TACF) preserves the time scale and is invariant with respect to the time delay between the signals. The time scale factor can, thus, be estimated independently from time delay using the TACFs of the two signals. After estimating the time scale factor, the signal can be scaled by the estimated amount. The time delay is then estimated without bias due to the time scale factor. To obtain high resolution joint estimates, the time scale factor is estimated in the scale domain from the scale transforms of the TACFs of the two signals. The proposed method has low computational cost. Moreover, the results on synthetic signals show good performance of the method with respect to the Cramér-Rao Lower Bound and the joint Maximum Likelihood Estimation. A possible application of the technique to the analysis of electromyogram (EMG) signals detected during electrically elicited contractions is also presented. In a few representative cases, it is shown that the time scale estimate reveals myoelectric manifestations of muscle fatigue and is less affected by M-wave truncation than spectral EMG attributes.     

A cross validation study of deep brain stimulation targeting: from experts to atlas-based, segmentation-based and automatic registration algorithms

Validation of image registration algorithms is a difficult task and open-ended problem, usually application-dependent. In this paper, we focus on deep brain stimulation (DBS) targeting for the treatment of movement disorders like Parkinson's disease and essential tremor. DBS involves implantation of an electrode deep inside the brain to electrically stimulate specific areas shutting down the disease's symptoms. The subthalamic nucleus (STN) has turned out to be the optimal target for this kind of surgery. Unfortunately, the STN is in general not clearly distinguishable in common medical imaging modalities. Usual techniques to infer its location are the use of anatomical atlases and visible surrounding landmarks. Surgeons have to adjust the electrode intraoperatively using electrophysiological recordings and macrostimulation tests. We constructed a ground truth derived from specific patients whose STNs are clearly visible on magnetic resonance (MR) T2-weighted images. A patient is chosen as atlas both for the right and left sides. Then, by registering each patient with the atlas using different methods, several estimations of the STN location are obtained. Two studies are driven using our proposed validation scheme. First, a comparison between different atlas-based and nonrigid registration algorithms with a evaluation of their performance and usability to locate the STN automatically. Second, a study of which visible surrounding structures influence the STN location. The two studies are cross validated between them and against expert's variability. Using this scheme, we evaluated the expert's ability against the estimation error provided by the tested algorithms and we demonstrated that automatic STN targeting is possible and as accurate as the expert-driven techniques currently used. We also show which structures have to be taken into account to accurately estimate the STN location.     

B-spline explicit active surfaces: an efficient framework for real-time 3-D region-based segmentation

A new formulation of active contours based on explicit functions has been recently suggested. This novel framework allows real-time 3-D segmentation since it reduces the dimensionality of the segmentation problem. In this paper, we propose a B-spline formulation of this approach, which further improves the computational efficiency of the algorithm. We also show that this framework allows evolving the active contour using local region-based terms, thereby overcoming the limitations of the original method while preserving computational speed. The feasibility of real-time 3-D segmentation is demonstrated using simulated and medical data such as liver computer tomography and cardiac ultrasound images.     

On-Line Harmonic Analysis as a Diagnostic Design and Control Tool for Power Systems Feeding Arc Furnaces, Thyristor-Controlled Mill Drives, and Power Factor Correction Equipment

Microprocessor-based signal processing equipment for frequencies up to 20 kHz have become compact and fast enough to allow direct on-line real-time analysis on power systems to determine behavior. A case study is presented for a small steelworks operating a 25-MVA open arc furnace, installing 6.5 MVA of thyristor control equipment and further power factor correcting equipment and harmonic filters on a system with ill-defined parameters, low short- circuit capacity, and already containing power factor correcting capacitors tuned at the third harmonic. Discrete spectrum analysis equipment, microprocessor-based and coupled via IEEE-bus to a microcomputer system, was used to do on-line analysis at various points in the system. The high-speed system enabled sophisticated signal processing to yield even and uneven harmonics, stochastic components, system parameters and resonances and mutual interference. It is shown how this is used to rectify problems in the system, adapt equipment, and design power factor and filter equipment.     

Microwave cavity perturbation technique: Part I: Principles

This report reviews the analysis used to extract the complex conductivity of a compound from a microwave cavity perturbation measurement. We intend to present a generalized treatment valid for any spheroidally shaped sample of arbitrary conductivity which is placed at either the electric or magnetic field antinode of the cavity. To begin with, we establish the relationship between the measured parameters and the conductivity for a spherical sample. Next, we extend these results to the case of spheroids; and for the first time, we cover all different configurations that one can possibly use to study an arbitrary conducting sample inside a cavity: in particular, all possible orientations of the sample with respect to the applied field are solved.