Evaluation and characterization of ammoniumpolyphosphate–pentaerythritol‐based systems for intumescent coatings

Intumescent coatings are increasingly used as a method of passive fire protection on steel constructions. By forming a carbon network and releasing a blowing agent, the thin intumescent film swells 100‐fold at elevated temperatures. The highly insulating foam effectively prevents the load bearing steel from reaching its critical temperature at which it looses its mechanical properties and collapses. The role of the carbon donor in intumescent coatings has been studied. Comparison in temperature development, foaming ratios, and rheological behavior has been performed between formulations containing pentaerythritol (penta), di–penta, and tri–penta. A simulated fire test, in which the temperature development during intumescence was studied, showed that the formulations containing penta were considerably more efficient in keeping a low temperature throughout the process. A more rapid temperature development was displayed when using di–penta and tri–penta as the carbon donor. Rheometer tests indicate that penta formulations enter the intumescent process at a lower temperature and stays in it for a longer time than di–penta and tri–penta formulations. Furthermore, the crossover temperature and maximum phase angle are shifted towards higher temperatures by replacing penta with di–penta and with tri–penta in the formulations, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 748–753, 2007     

Influence of Pt Loading on Al2O3 for the Low Temperature Combustion of Methanol with and Without a Trace Amount of Ammonia

Pt/Al₂O₃ catalysts with platinum contents of 0.1, 1.0 and 3.0 wt% were used for the low temperature combustion of methanol in the absence and the respective presence of a trace amount of ammonia. It is observed that ammonia inhibits the combustion of methanol, which is due to competition between methanol and ammonia for the same sites. For a fixed space velocity and without ammonia in the gas, the performances of the catalysts increase up to a Pt loading of 1.0 wt%. In the presence of ammonia, however, no upper limit of performance is observed with increased Pt content. The results are discussed in terms of both Pt–support interface and the Pt surface being active.     

EVALUATION OF A METHOD FOR MEASURING MIXING TIME USING NUMERICAL SIMULATION AND EXPERIMENTAL DATA

A method for measuring mixing performance in large-scale vessels is investigated. The method is evaluated experimentally in a pilotscale reactor and by using a model based on the three-dimensional calculation of the flow field. The method is based on injection of a tracer and measuring the concentration with several detectors at different locations. The mixing performance is measured as the decay rate of the difference between the concentration at the detectors and the final concentration.

The model predicts a strong dependence on injection point. The assumption of a first-order decay rate of the concentration deviation is more appropriate for some injection points.     

An XPS study of dispersion and valence state of TiO2 supported vanadium oxide catalysts

Monolayer vanadium species are mainly in the V(V) valence state, but with XPS a small fraction of V⁴⁺ species are identified. Prolonged analysis treatment increases the V⁴⁺ concentration. With increasing vanadium concentration, a monolayer coverage corresponding to 1 mg V₂O₅ per m² develops, and it contains additional layers with a thickness of about 250 Å at 4 mg V₂O₅ per m², covering 3% of its surface area.     

Ammoxidation of toluene over Y-Ba-Cu-Co-O perovskites

Ammoxidation of toluene over the perovskites YBa₂Cu₃O_6.1, YBa₂Cu₂CoO_6.7 and YBaCuCoO_4.9 was investigated at 400 °C. At low partial pressures of O₂ benzonitrile was selectively formed, while CO₂ was the main product at high pressures of O₂. Systematic differences in activity were observed for the three phases and are related to the crystal contents of Cu and Co. At low O₂ pressures, Cu-sites are active for nitrile formation, while Co-sites give CO₂. At high O₂ pressures, the activity for CO₂ of Cu-sites increases more than that of Co-sites due to filling of near-surface oxygen vacancies.     

Gas-liquid mass transfer in taylor flow through a capillary

The gas-liquid mass transfer in two-phase flow through a capillary has been measured for water-air, ethanol-air and ethylene glycol-air systems. A semi-theoretical model has been developed and compared with experimental results. and a full computer simulations of the flow pattern and mass transfer using a flow simulation program have been made. The measured values are about 30% less than the calculated values.     

A multivariate study of the correlation between tocopherol content and fatty acid composition in vegetable oils

The main biochemical function of the tocopherols is believed to be the protection of polyunsaturated fatty acids (PUFA) against peroxidation. A critical question that must be asked in reference to this is whether there is a biochemical link between the tocopherol levels and the degree of unsaturation in vegetable oils, the main source of dietary PUFA and vitamin E. We used a mathematical approach in an effort to highlight some facts that might help address this question. Literature data on the relative composition of fatty acids (16:0, 16:1, 18:0, 18:1, 18:2, and 18:3) and the contents of tocopherols (α-, β-, δ-, and γ-tocopherol) in 101 oil samples, including 14 different botanical species, were analyzed by principal-component analysis and linear regression. There was a negative correlation between α- and γ-tocopherols (r=0.633, P<0.05). Results also showed a positive correlation between linoleic acid (18:2) and α-tocopherol (r=0.549, P<0.05) and suggested a positive correlation between linolenic acid (18:3) and γ-tocopherol.     

Friction of linerboard based on recycled fiber

The purpose of this investigation was to study the origin of the differences in paper‐to‐paper friction of linerboards based on old corrugated containers (OCC). The sheets were subjected to two extraction stages and analyzed with respect to, surface roughness, and their content of low‐molecular‐mass lipophilic compounds (LLC). Friction was measured using a friction tester based on the horizontal plane principle. The surface roughness was measured using a Perthometer profiler and the low molecular mass lipophilic constituent of the paper sheets was determined by gas chromatography‐mass spectroscopy. The sheets were imaged using environmental scanning electron microscopy (ESEM), and the relative compositions of inorganic ions on the paper surfaces were determined by energy dispersive X‐ray spectroscopy (EDS). The results showed that a high amount of LLC in the sheets lead to low friction, due to lubrication. It was also observed that large CaCO₃ particles on the surface had a friction‐increasing effect, and that there was no relationship between the surface roughness and the friction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1511–1520, 2002     

A study of sulfur bridges in filled natural rubber vulcanizates by pyrolysis gas chromatography with flame-photometric detection

Natural rubber vulcanizates of two formulations, with sulfur/N-cyclohexyl-2-benzothiazolesulfenamide (CBS) and tetramethylthiuram disulfide (TMTD), respectively, were analyzed by pyrolysis gas chromatography. A sulfur-selective flame-photometric detector was utilized. The main pyrolysis products were identified as CS₂ and some thiophenes. The yields of the pyrolysis products from the two types of rubber were very different. The yields also varied with the curing time of the rubbers.     

Syntheses of female sex pheromone precursors of pine sawfly species and of some structurally related methyl-branched long-chain 2-alkanols

3,7-Dimethyl-2-undecanol, 3,7,9-trimethyl-2-tridecanol, and 3,7, 11-trimethyl-2-tridecanol were synthesized as racemic mixtures in moderate yields. The alcohols are known precursors of the female sex pheromones of the pine sawfly species Diprion nipponica, Macrodiprion nemoralis, and Microdiprion pallipes, respectively. Stereoisomeric mixtures of 3,8,12-trimethyl-2-tridecanol, erythro-(2R,3R,11R/S)-3,11-dimethyl-2-tetradecanol, 3,5-dimethyl-2-tetradecanol, and 5,7-dimethyl-2-tetradecanol, structurally related to sex pheromone alcohol precursors of pine sawfly species, were also synthesized in moderate yields. The key reaction in the syntheses was the ring opening of -butyrolactones by using different alkyl lithiums as nucleophiles.