Computer Simulation of Fe-Al-Si System Diffusion Couples

Diffusion couples, Fe-6.8 wt% Al-1.0 wt% Si/Fe and Fe-6.3 wt% Al-0.9 wt% Si/Fe were constructed and separately annealed at 1050°C for 3 h and at 1000°C for 64 h. The concentration profiles of Fe, Al and Si atoms in these couples were measured by electron probe micro-analysis (EPMA), while the diffusion behavior was also simulated by coupling thermodynamic and kinetic properties of Fe-Al-Si system. The simulation results were in good agreement with the measured concentration profiles showing the validity of dynamic parameters of Fe-Al-Si system. Calculation was made for Fe-7 wt% Al-1 wt% Si/Fe diffusion couples at 1000?C with different diffusion time. Silicon uphill was found under the influence of aluminum.     

Second law-based thermodynamic analysis of water-lithium bromide absorption refrigeration system

In this study, the first and the second law of thermodynamics are used to analyze the performance of a single-stage water-lithium bromide absorption refrigeration system (ARS) when some working parameters are varied. A mathematical model based on the exergy method is introduced to evaluate the system performance, exergy loss of each component and total exergy loss of all the system components. Parameters connected with performance of the cycle–circulation ratio (CR), coefficient of performance (COP), Carnot coefficient of performance (COP_c), exergetic efficiency (ξ) and efficiency ratio (τ)–are calculated from the thermodynamic properties of the working fluids at various operating conditions. Using the developed model, the effect of main system temperatures on the performance parameters of the system, irreversibilities in the thermal process and non-dimensional exergy loss of each component are analyzed in detail. The results show that the performance of the ARS increases with increasing generator and evaporator temperatures, but decreases with increasing condenser and absorber temperatures. Exergy losses in the expansion valves, pump and heat exchangers, especially refrigerant heat exchanger, are small compared to other components. The highest exergy loss occurs in the generator regardless of operating conditions, which therefore makes the generator the most important component of the cycle.     

梁之歌

北地里,千宅万户的屋梁受尽风欺雪压犹自温柔地抱着一团小小的燕巢。这是最温情的守候。人世间,千秋万代的屋梁穷尽一生之力,默默擎起身下各异的居所。这是最无私的担当。可古往今来,自喻有情的世人皆赞梁间燕,梁     

Narrative empathy.

Therapeutic empathy is described as an active narrative process, in which the therapist attempts to construe and express the inner emotional logic of the client's problem patterns. The empathic narrative is contrasted to the external narrative, which describes the client from the outside and the client's behavior as making sense from the point of view of the theory rather than from that of the client's. The criterion of an empathic narrative is that it elicits from the client the response "That's me!" The external narrative, in distinction, fails to elicit this self-recognition. The persistent rejection of the therapist's formulations by the client and the ensuing state of therapeutic impasse is interpreted as being often due to the therapist's assumption that the client should accept an external narrative as if it were an empathic one. When such a situation develops, the therapist may overcome the impasse by acknowledging the externality of the previous therapeutic narrative and proposing a potentially empathic one in its stead. Three case examples of a 49-yr-old married woman, a teenage girl, and 28-yr-old single male are presented to demonstrate narrative empathy within the therapeutic context. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Short-term psychotherapy and the rise of the life-sketch.

The life-sketch is a highly condensed psychobiography designed to focus and shorten therapy that has recently emerged at different points across the spectrum of therapeutic approaches. It reflects a growing view of psychotherapy as a re-narration of the client's life story. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The Lowry test: A simple status-free measure of intellectual ability.

The validity of an intelligence test is discussed. "The Lowry Reasoning Test Combination has been found to be relatively free of social status bias and to measure intellectual function. It is easily administered and simply scored and does not depend upon a high level of verbal ability. Variance in concept difficulty is obtained by altering combinations of constructs while keeping the verbal material on a uniformly simple level. Whereever such a discriminative and effective selection device is needed the present writers would recommend that the Lowry test be tried." (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Laser cutting of 7050 Al alloy reinforced with Al2O3 and B4C composites

In the present study, laser cutting of 7050 aluminum alloy sheets reinforced with Al₂O₃ and B₄C particles are carried out. The cut geometry is examined using scanning electron microscope and the optical microscope. The lump parameter analysis technique is used to formulate and determine the kerf width size. The predictions for kerf width are compared with experimental data. The percentage kerf width size variation along the cut edges is determined and the influence of the laser power level and duty cycle of the laser pulses on the percentage kerf width size variation is examined. It is found that 7050 aluminum alloy reinforced with 20% Al₂O₃ composite results in relatively large kerf width size as compared to its counter parts that corresponding to 7050 aluminum alloy reinforced with 20% B₄C composite. The kerf width size predicted agreed with the experimental data for both composites.     

Estimation method for determining surface film conductance during cooling of fish packages

This paper presents an alternative method for determining the surface film conductance of an infinite fish slab subjected to the cooling process. Many methods have been published, but their solutions have inherent appreciable inaccuracy and limitations. The present authors used the temperature histories of five locations within a slab sample of fish, obtained by the experimental investigation part of this work, along with the inverse heat conduction problem (IHCP) technique to develop a correlation for variable surface film conductance. When the above correlation was used for temperature predictions, the predicted and experimentally measured temperature distribution profiles were compared numerically. Better agreement than that implemented by other investigators was achieved. This revealed the accuracy and superiority of the present method, and the limitations of other methods are overcome in this method.     

Completeness in Two-Party Secure Computation: A Computational View

A Secure Function Evaluation (SFE) of a two-variable function f(·,·) is a protocol that allows two parties with inputs x and y to evaluate f(x,y) in a manner where neither party learns "more than is necessary". A rich body of work deals with the study of completeness for secure two-party computation. A function f is complete for SFE if a protocol for securely evaluating f allows the secure evaluation of all (efficiently computable) functions. The questions investigated are which functions are complete for SFE, which functions have SFE protocols unconditionally and whether there are functions that are neither complete nor have efficient SFE protocols. The previous study of these questions was mainly conducted from an information theoretic point of view and provided strong answers in the form of combinatorial properties. However, we show that there are major differences between the information theoretic and computational settings. In particular, we show functions that are considered as having SFE unconditionally by the combinatorial criteria but are actually complete in the computational setting. We initiate the fully computational study of these fundamental questions. Somewhat surprisingly, we manage to provide an almost full characterization of the complete functions in this model as well. More precisely, we present a computational criterion (called computational row non-transitivity) for a function f to be complete for the asymmetric case. Furthermore, we show a matching criterion called computational row transitivity for f to have a simple SFE (based on no additional assumptions). This criterion is close to the negation of the computational row non-transitivity and thus we essentially characterize all "nice" functions as either complete or having SFE unconditionally.