Authors' reply [to comments on "Variable structure control of discretized continuous-time systems"]

In their comments (IEEE Trans. Autom. Control, vol. 50, no. 4, pp. 538-540, Apr. 2004), Paranjpe and Phadke show that the control law inside the sector we proposed (Corradini and Orlando, "Variable structure control of discretized continuous-time systems", IEEE Trans. Autom. Control, vol. 43,no.9,pp.1329-1334,Sep.1998) works even in the case when the control input vector has a not negligible uncertain term b. Though this result is of course welcome since it widens the validity range of the controller, it is still our opinion that the control law (17b) is not completely insensitive to the amplitude of the uncertain term b. This issue is explained in the reply.     

Mass transfer limitations in slurry photocatalytic reactors: Experimental validation

In the present work the existence of mass transfer limitations in slurry, photocatalytic reactors is studied. Experimental validation is made in a flat plate reactor that is part of a recycling system. The reactor is described with a mathematical model previously developed [Ballari et al., 2008a. Chemical Engineering Journal 136, 50], considering a transient, two-dimensional mass balance (TDM). The complete reactor model was developed to show the existence of these effects, which result from the occurrence of concentration gradients in reaction space. They develop when these reactors are operated under some operating conditions whose effects should be always analyzed before assuming the validity of existence of perfect mixing in reaction space. Dichloroacetic acid (DCA) was the adopted model compound. To solve TDM, a kinetic expression for DCA acid was determined before under well mixed conditions [Ballari et al., 2009. Industrial and Engineering Chemistry Research 48(4), 1847]. The studied variables are flow rate, catalyst loading, and irradiation rates. The experimental data agree quite well when they are interpreted in terms of the two-dimensional model (TDM) regardless of the operating mode. The perfect mixing model (PMM), normally employed to describe this and other types of slurry photoreactors, does not have the same level of universal application; i.e. it is restricted to perfect mixing, but in many cases far simpler to use. However, it can be concluded that when the photocatalytic reaction is not fast, employing catalyst loadings below 1 g L^–1, irradiation rates at the reactor wall below 1×10^?6 Einstein cm^?2 s^?1 and good mixing operation (Re>1700) it will be always safe to assume that mass transport limitations in the bulk of the fluid are nonexistent. In a typical batch reactor the above flow conditions are equivalent to very intense mixing. If the catalyst concentration is increased, the mixing conditions should be improved in the same proportion. Within limits, higher solid loadings can be compensated with lower irradiation rates [Ballari et al., 2008a. Chemical Engineering Journal 136, 50]. In addition, with the validated model, additional simulations are shown, operating the reactor under different virtual reactor thicknesses to widen amplitude of the reached conclusions. These findings will be useful in kinetic studies to prevent incursion in certain ranges of experimental conditions that could lead to erroneous interpretation of the obtained kinetic data.     

A comparison of interview and self-report methods for the assessment of borderline personality disorder criteria.

Interview methods are widely regarded as the standard for the diagnosis of borderline personality disorder (BPD), whereas self-report methods are considered a time-efficient alternative. However, the relative validity of these methods has not been sufficiently tested. The current study used data from the Collaborative Longitudinal Personality disorder Study to compare diagnostic base rates and the relative validity of interview and self-report methods for assessing functional outcome in BPD. Although self-report yielded higher base rates of criteria endorsement, results did not support the common assumption that diagnostic interviews are more valid than self-reports, but instead indicated the combined use of these methods optimally identifies BPD criteria. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Magnesium substitution in brushite cements

The use of magnesium-doped ceramics has been described to modify brushite cements and improve their biological behavior. However, few studies have analyzed the efficiency of this approach to induce magnesium substitution in brushite crystals. Mg-doped ceramics composed of Mg-substituted β-TCP, stanfieldite and/or farringtonite were reacted with primary monocalcium phosphate (MCP) in the presence of water. The cement setting reaction has resulted in the formation of brushite and newberyite within the cement matrix. Interestingly, the combination of SAED and EDX analyses of single crystal has indicated the occurrence of magnesium substitution within brushite crystals. Moreover, the effect of magnesium ions on the structure, and mechanical and setting properties of the new cements was characterized as well as the release of Ca^2 + and Mg^2 + ions. Further research would enhance the efficiency of the system to incorporate larger amounts of magnesium ions within brushite crystals.     

Tuberculosis and HIV infection. Clinical characteristics and diagnosis

The in vitro radiosensitivity of dermal fibroblasts has been found to vary between individuals, and a number of studies have also shown that this parameter correlates with radiation-induced late injuries in clinical radiotherapy. In addition, certain genetic disorders are known to effect radiosensitivity, e.g. normal tissues of patients homozygous or heterozygous for the ataxia teleangiectasia gene show unusual sensitivity to radiation both in vivo and in vitro. Thus, it has been assumed that there is a genetically determined component resulting in a certain intrinsic cellular radiation response in an individual. To study this possible relationship between different cells of a specific patient, we established eight pairs of dermal and tumor fibroblast cultures. The donor patients had either adenocarcinoma of the uterus or squamous cell carcinoma (SCC) of the head and neck. The radiosensitivity of these strains was determined by a 96-well plate clonogenic assay, previously used by us for radiosensitivity testing of cancer cells. From a paired comparison, the values for the cell fraction surviving 2.0 Gy (SF2), of both fibroblast strains, were found to be on the same level in five out of eight cases. In patient 6, the SF2 of tumor fibroblasts was significantly higher than that of dermal fibroblasts (P=0.0014). In two additional cases the tendency was the same, but not statistically significant. As groups, the two types of fibroblasts did not differ from each other, mean SF2 values of 0.24+/-0.07 and 0.21+/-0.05, respectively. The SF2 of tumor fibroblasts from SCC patients proved to be significantly higher than that of the adenocarcinoma patients (P=0.030). These preliminary results indicate that the in vitro radiosensitivity of tumor fibroblasts correlates with normal cell sensitivity in many cases, but not in all. The radiosensitivity of tumor fibroblasts also seems to follow the level of in vitro radiosensitivity determined for the corresponding histological type of tumor cells. Further studies are needed to determine more closely the relationship between the radiosensitivities of tumor cells and tumor fibroblasts, thus evaluating the possibility of testing radiosensitivity from tumor fibroblasts in order to estimate tumor response.     

Affective and behavioral responses to health-related social control.

Social control has the potential to encourage engagement in a healthy lifestyle, but its effectiveness may depend on the nature of the influence attempt. Participants (N = 282) described a situation in which someone attempted to influence their health-related behavior. Experiencing positive social control was associated with a greater tendency to change the behavior and less ignoring/doing nothing, whereas negative social control was associated with a lesser tendency to change the behavior and more hiding of unhealthy behavior. These associations could be accounted for by affective responses to the social control attempts. Results emphasize the need to better understand the regulatory influence of relationships on health behavior and the conditions under which social control is most likely to have health-promoting effects. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Patterns and correlates of binge drinking trajectories from early adolescence to young adulthood.

Latent growth mixture modeling was used to identify developmental trajectories (described in terms of demographics, exposure and resistance to a pro-drug environment, and deviant behavior) of binge drinking among 5,694 individuals who completed 6 surveys from ages 13 to 23 years: nonbingers (32%); moderate stables (37%), who had consistently low levels of bingeing; steady increasers (16%), who increased from the lowest to highest level of bingeing; adolescent bingers (9%), whose early rise in bingeing was followed by a decrease to a moderate level; and early highs (6%), who decreased from the highest level of bingeing to a moderate level. Results show considerable diversity in binge drinking patterns and the correlates of bingeing across trajectory classes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)