Influence of polymer infiltration and pyrolysis process on mechanical strength of polycarbosilane-derived silicon carbide ceramics

In this article, strength evaluation of silicon carbide (Si–C) ceramics fabricated from polycarbosilane (PCS) precursor is described. Si–C ceramics was prepared by firing a green body made of the mixture of Si–C nano-powders and a PCS solution at 1,273 K in N₂ gas for an hour. To obtain dense Si–C, the solution was infiltrated into the produced body, and then it was fired again. The polymer infiltration and pyrolysis (PIP) process was conducted up to 12 cycles. Si–C ceramics was diced to be rectangle shape measuring 1.0 mm × 3.0 mm × 0.5 mm, and was subjected to the three-point bending test for measurement of the Young’s modulus and bending strength. Si–C specimens fabricated through PIP processes less than 2 cycles showed non-linear force–displacement curves like a polymer, whereas those through the processes more than 3 cycles showed linear relations and fractured in a brittle manner. The Young’s modulus of 12-cycles-PIPs specimen was found to be 56 GPa on average, which was approximately 22-fold of non-PIP specimen. The bending strength was also increased with an increase in the number of PIP process. The maximum value was found to be 157 MPa. The cause of the influence of PIP process on the mechanical characteristics is discussed using a PCS-derived Si–C model.     

Lattice Boltzmann simulation on continuously regenerating diesel filter

To reduce particulate matter (PM) including soot in diesel exhaust gas, a diesel particulate filter (DPF) has been developed. Since it is difficult to observe the phenomena in a DPF experimentally, we have conducted a lattice Boltzmann simulation. In this study, we simulated the flow in a metallic filter. An X-ray computed tomography (CT) technique was applied to obtain its inner structure. The processes of soot deposition and oxidation were included for a continuously regenerating diesel filter. By comparing experimental data, a parameter of soot deposition probability in the numerical model was determined.     

Short-term plasticity and long-term potentiation mimicked in single inorganic synapses

Memory is believed to occur in the human brain as a result of two types of synaptic plasticity: short-term plasticity (STP) and long-term potentiation (LTP; refs 1-4). In neuromorphic engineering, emulation of known neural behaviour has proven to be difficult to implement in software because of the highly complex interconnected nature of thought processes. Here we report the discovery of a Ag(2)S inorganic synapse, which emulates the synaptic functions of both STP and LTP characteristics through the use of input pulse repetition time. The structure known as an atomic switch, operating at critical voltages, stores information as STP with a spontaneous decay of conductance level in response to intermittent input stimuli, whereas frequent stimulation results in a transition to LTP. The Ag(2)S inorganic synapse has interesting characteristics with analogies to an individual biological synapse, and achieves dynamic memorization in a single device without the need of external preprogramming. A psychological model related to the process of memorizing and forgetting is also demonstrated using the inorganic synapses. Our Ag(2)S element indicates a breakthrough in mimicking synaptic behaviour essential for the further creation of artificial neural systems that emulate characteristics of human memory.     

Flame development along a straight vortex

Flame development along a straight vortex was studied experimentally to elucidate the effects of the maximum circumferential velocity and the density ratio of the flame. A pair of straight vortices was produced in nitrogen-diluted stoichiometric hydrogen-oxygen mixtures with density ratios ranging from 5.3 to 7.2. The velocity field measured by particle image velocimetry (PIV) showed that the vortex tube had a mean maximum circumferential velocity ranging from 18.0 to 35.8 m/s and had a mean core diameter ranging from 5 to 6 mm. One of the vortices was ignited at the core by a focused laser at 193 nm without disturbing the flow field. The flame propagated along the axis of the straight vortex at a speed much higher than in the radial direction or in the quiescent mixture. The axial propagation velocity increased over time and became nearly constant when the half-axial length of the flame was larger than the core diameter of the vortex tube. The axial propagation velocity at steady state was roughly proportional to the maximum circumferential velocity and to the density ratio minus unity. The axial propagation velocity in the initial stage increased with the square root of the half-axial length of the flame as well as with the maximum circumferential velocity and the density ratio minus unity.     

Toxicity of puffer fish fins

Puffer fish is prized as a Japanese traditional food and its fin is also used in the cuisine. However, whether the fin is edible or not is determined for convenience from the toxicity of skin, since little information is available about the toxicity of puffer fish fins. In the present study, we examined the toxicity of fins and skin of three toxic species, Takifugu vermicularis, T. snyderi, and T. porphyreus. The toxicity of T. vermicularis fins (< 5-52.4 MU/g) was significantly lower than that of skin (<5-1200 MU/g). HPLC analysis showed that tetrodotoxin was a major toxic principle irrespective of the toxicity value in each tissue of T. vermicularis. In the case of T. snyderi and T. porphyreus, the toxicity of fins was at almost the same level as that of the skin. The toxicity (< 10-12 MU/g) of caudal fins of T. porphyreus was apparently increased to 16.5-22.0 MU/g by drying. However, the toxin amounts in the dried fins were slightly decreased as compared with those of the non-dried fins. These results demonstrate that puffer fish with toxic skin also have toxic fins.     

Cloning of a novel tyrosinase-encoding gene (melB) from Aspergillus oryzae and its overexpression in solid-state culture (Rice Koji)

We have cloned a novel tyrosinase-encoding gene (melB) specifically expressed in solid-state culture of Aspergillus oryzae. A tyrosinase-encoding gene (melO) from A. oryzae was already cloned and the protein structures of its catalytic and copper binding domains were investigated. However, our recent results revealed that the melO gene was highly expressed in submerged culture but not in solid-state culture. Because tyrosinase activity was also detected in solid-state culture, we assumed that another tyrosinase gene other than melO is expressed in solid-state culture. Another tyrosinase gene was screened using the expressed sequence tag (EST) library. One redundant cDNA clone homologous with the tyrosinase gene was found in the collection of wheat bran culture. Northern blot analysis revealed that the gene corresponding to the cDNA clone was specifically expressed in solid-state culture (koji making), but not in submerged culture. Molecular cloning showed that the gene carried six exons interrupted by five introns and had an open reading frame encoding 616 amino acid residues. This gene was designated as melB. The deduced amino acid sequence of the gene had weak homology (24%-33%) with MelO and other fungal tyrosinases but the sequences of the copper binding domains were highly conserved. When the melB gene was expressed under the control of the glaB promoter in solid-state culture, tyrosinase activity was markedly enhanced and the culture mass was browned with the melanization by MelB tyrosinase. These results indicated that the melB gene encodes a novel tyrosinase associated with melanization in solid-state culture.     

Reduced influences of the HPHT substrates on the electronic quality of homoepitaxial CVD diamond layers and on their ultraviolet detector performance

We have carried out a detailed estimation of the influences of the high-pressure/high-temperature-synthesized (HPHT) Ib substrate on the crystalline quality of the homoepitaxial diamond and on the performance of the ultraviolet (UV) detector. The H3 center related luminescence peaks were observed even from the homoepitaxial diamond film having a thickness of 250 μm on a HPHT Ib substrate, suggesting that carriers excited in the epitaxial diamond layer can diffuse over a rather long distance to the HPHT substrate when the quality of the epitaxial layer is sufficiently high. Furthermore, we have attempted to efficiently reduce the long-distance carrier diffusion phenomenon by inserting a boron-doped layer between the epitaxial layer for the detection and the HPHT Ib substrate. The electrically-floating B-doped layer inserted between the homoepitaxial layer and the HPHT substrate efficiently reduced the long-distance carrier diffusion phenomenon, and substantially improved the performance of the UV detector fabricated on a low-quality HPHT Ib substrate.     

Dietary Glucosylceramide Enhances Cornified Envelope Formation via Transglutaminase Expression and Involucrin Production

In this study, we investigated whether dietary glucosylceramide (GlcCer) and its metabolite sphingoid bases, sphingosine (SS), phytosphingosine (PS), sphingadienine (SD) and 4-hydroxysphingenine (4HS), influence cornified envelope (CE) formation. CE is formed during terminal differentiation of the epidermis through crosslinking of specific precursor proteins by transglutaminases (TGases), and is essential for the skin's barrier function. Oral administration of GlcCer (0.25 mg/day) for 14 consecutive days dramatically reduced transepidermal water loss, an indicator of the skin barrier condition, in hairless mice with barrier perturbation induced by single-dose ultraviolet B (UVB) irradiation. The GlcCer treatment also increased the level of TGase-1 mRNA in UVB-irradiated murine epidermis approximately 1.6-fold compared with the control. Further, all four sphingoid bases at 1 μM concentration enhanced CE formation of cultured normal human keratinocyte cells. Among them, SS, PS and SD, but not 4HS, stimulated production of involucrin, one of the CE major precursor proteins. SD increased the expression of TGase-1 mRNA, while SS increased the expression of TGase-3 mRNA. These results indicate that the skin barrier improvement induced by oral GlcCer treatment might be at least partly due to a reinforcement of CE formation in the epidermis mediated by sphingoid bases metabolically derived from GlcCer.     

A novel hetero-junction Tunnel-FET using Semiconducting silicide–Silicon contact and its scalability

A new type of silicon-based Tunneling FET (TFET) using semiconducting silicide Mg₂Si/Si hetero-junction as source-channel structure is proposed and the device simulation has been presented. With narrow bandgap of silicide and the conduction and valence band discontinuous at the hetero-junction, larger drain current and smaller subthreshold swing than those of Si homo-junction TFET can be obtained. Structural optimization study reveals that low Si channel impurity concentration and the alignment of the gate electrode edge to the hetero-junction lead to better performance of the TFET. Scaling of the gate length increases the off-state leakage current, however, the drain voltage (V_d) reduction in accordance with the gate scaling suppresses the phenomenon, keeping its high drivability.