Hot ductility of simulated stainless-steel weld metals

Simulation of stainless-steel weld metals was performed using a Gleeble-1500 thermomechanical simulator. Two classes of materials were investigated, including both fully austenitic and austenitic-ferritic stainless steels. The niobium content varied within each class. The simulation comprised heating to melting point, melting for a short time, and cooling to a number of temperatures, at which point the samples were fractured under a tensile load. The hot ductility, in terms of reduction of area, was measured. Metallographic examinations were performed using both optical and electron microscopy. The hot ductilities of the austenitic-ferritic weld metals investigated were superior to those of fully austenitic weld metals of corresponding niobium content. The beneficial effects of ferrite were found to decrease with increasing niobium content. The effect of niobium on hot ductility was detrimental, i.e. an increase in niobium content resulted in a decrease in hot ductility which was attributed to the formation of (FeCrNi)₂Nb-, a low melting eutectic, along the austenitic grain boundaries. The criterion of hot ductility by simulation of the weld metals was also found to be reliable for evaluating susceptibility to solidification cracking.     

Dirty bosons: Screening,inert layers and the Lifshitz tail

The stability of the condensate in the presence of a weakly random substrate is shown to be due to screening of the random potential by distortions of the condensate. However the depletion of the condensate and the speed of sound are both affected: increased and decreased respectively. In the case of strong potential fluctuations He atoms may be trapped (remnants of single-particle localisation in the form of Lifshitz tail states). The circumstances under which this gives a picture of the inert layer will be discussed, and a surprising relation to dissipative tunneling will be mentioned.     

Plastic deformation in highly cross-linked rubber-modified epoxy resins

Plastic yielding behaviour of three different cross-link density rubber-modified epoxy resins, at different rubber levels and temperature, were investigated. All the systems studied show decrease in Young's modulus,E, and yield stress, _Y, with increasing temperature and rubber content. The deformation process was analysed using both Bowden and Argon theories. Molecular parameters from each. theory were then compared with chemical structures of the epoxy systems.     

Infiltration behaviour of an internal electrode and electrical properties of multilayer capacitors by electrode infiltration

The infiltration behaviour of a tin melt, as an internal electrode, to the porous layers, and the electrical properties of multilayer ceramic capacitors was investigated by electrode infiltration. By preventing green-state delamination between the dielectric green sheet and the carbon paste, uniform porous layers, 5 m thick, could be formed after sintering. When 15 vol % ceramic pillars were added to the carbon paste, the porous layer of the sintered samples could be considered as a porous solid formed by many pores larger than 4 m. The critical pressure for the infiltration of tin melt into such a porous layer was found to be 0.5 MPa. With a high infiltration pressure, the resistivity of multilayer capacitors was decreased to 10⁸–10⁹cm due to the growth of micro-defects formed on the surface of the dielectric layers during the lamination process.     

Dielectric properties and microstructural behaviour of B-site calcium-doped barium titanate ceramics

Dielectric properties and microstructural behaviour of Ba_1–x Sr _x Ti_1–y Ca _y O_3–y ceramics, where strontium and calcium were doped on the barium and titanium sites, respectively, within the range 0x0.24 and 0y0.05, were investigated. Calcium addition decreased the tetragonality,c/a, increased the unit cell volume, and lowered the Curie temperature, which were all attributed to the occupancy of Ca²⁺ ions on titanium sites. When sintered at a low oxygen partial pressure of 10^–9 MPa, a resistivity higher than 10¹¹ cm was maintained for the formulations containing B-site calcium substitution more than 0.5 mol %. With increasing the amount of calcium addition, the Curie peak was depressed and completely broadened for the compositions with calcium addition more than 3 mol %, where the average grain size was smaller than 1 m. Co-firing with nickel electrodes in a reducing atmosphere also depressed the Curie peak and inhibited the grain growth due to the diffusion of nickel into the dielectrics.     

Measurement of the g-shift in superfluid3he-B

We have measured the g-shift in superfluid³He-B as a function of temperature above 0.5 mK at a pressure of 1.03 bar, and a frequency of 3.87 MHz. We compare our results with predictions of the quasi-classical and Ginzburg-Landau theories, and present values of the Fermi-liquid parameter F ₂ ^a and the -parameter ₃₄₅.     

红外弱小目标的匹配方法研究与仿真

研究红外图像中的目标匹配问题。针对传统的红外图像中目标匹配效果不理想,匹配不准确。当红外图像中是弱小目标时,背景灰度值与目标灰度值非常相近,灰度直方图均衡化无法实现目标与背景的完整分离,导致漏匹配率较高的问题。为提高目标的匹配精度,提出一种形态学预处理的红外目标匹配方法,通过形态学算法提取出图像中的形状信息,利用形状信息将红外图像中的目标与背景完整分离,避免了只依靠灰度图像信息造成的不能完整分离目标与背景带来的漏匹配问题。进行仿真的结果证明,采用的形态学与处理的匹配方法能够完整将目标与背景分离,成功完成目标匹配,取得了满意的结果。     

Indices of the nutritional status of workers in the oil and gas production industry adapting to the extreme conditions of an arid zone

The authors studied actual nutrition and certain parameters of food (supply of vitamins A, E, C and the content of phospholipids, cholesterol, NEFA, triglycerides and cholesterol esters) for oil derrick installers working during summer at the "Mangyschlakneft" amalgamation. Incorrect structure of their nutrition and insufficient supply with vitamins A and C, revealed as the result of the study, necessitate rationalization of the nutrition for such workers.     

Effects of junction formation conditions on the photovoltaic properties of sintered CdS/CdTe solar cells

Microstructures and properties of sintered CdS films on glass substrates and sintered CdTe films on polycrystal CdS substrates have been investigated. The CdS films, which contained 9 wt % CdCl₂ as a sintering aid and were sintered at 650° C for 1 h in nitrogen, are transparent and have an average grain size of 15m and an electrical resistivity of 0.5cm. The CdTe films, which were coated on the sintered CdS substrate and were sintered above 610° C for 1 h in nitrogen, have a dense structure with an average grain size larger than 5m. All polycrystal CdS/CdTe solar cells were fabricated by this successive coating and sintering method. The sintering temperature of CdTe films on the sintered CdS films was varied from 585 to 700° C. Compositional interfaces and p-n juctions are formed during sintering. The highest solar efficiency (7.18%) was found in a solar cell made by sintering the composite layer of glass-CdS-CdTe at 625° C for 1 h. A fabrication temperature below 610° C resulted in poor solar cell efficiencies due to the porous structure of the CdTe films and above 650° C also resulted in poor efficiencies due to the formation of a CdS_1-x Te_x layer at the interface and a large p-n junction depth.