Comment on raindrop size distribution model

The parameter set for the exponential raindrop size distribution model presented by Yeo, Kooi and Leong (see ibid. vol.41, P.709, 1993) was derived using a data set measured in Singapore. A limitation to the model is that it is accurate only for small rain rate or when the rain medium consists predominantly of small droplets with diameter D is < λ/π . A new parameter set that enables accurate computation of rain attenuation for droplets with diameter D = λ/π has since been derived using the same data set. This new parameter set has been proven to be more accurate in the computation of rain attenuation     

Designing the MPC105 PCI bridge/memory controller

The MPC105 peripheral component interconnection bridge/memory controller provides a platform-specification-compliant bridge between Power PC microprocessors and the PCI bus. With it, designers can create systems using peripherals already designed for a variety of standard PC interfaces. This bridge chip also integrates a secondary cache controller and high-performance memory controller that supports DRAM or synchronous DRAM and ROM or flash ROM     

Pentadiagonal alternating-direction-implicit finite-difference time-domain method for two-dimensional Schrödinger equation

In this paper, we have proposed a pentadiagonal alternating-direction-implicit (Penta-ADI) finite-difference time-domain (FDTD) method for the two-dimensional Schrödinger equation. Through the separation of complex wave function into real and imaginary parts, a pentadiagonal system of equations for the ADI method is obtained, which results in our Penta-ADI method. The Penta-ADI method is further simplified into pentadiagonal fundamental ADI (Penta-FADI) method, which has matrix-operator-free right-hand-sides (RHS), leading to the simplest and most concise update equations. As the Penta-FADI method involves five stencils in the left-hand-sides (LHS) of the pentadiagonal update equations, special treatments that are required for the implementation of the Dirichlet’s boundary conditions will be discussed. Using the Penta-FADI method, a significantly higher efficiency gain can be achieved over the conventional Tri-ADI method, which involves a tridiagonal system of equations.     

Effects of real‐time visual feedback on pre‐service teachers' singing

This pilot study focuses on the use real‐time visual feedback technology (VFT) in vocal training. The empirical research has two aims: to ascertain the effectiveness of the real‐time visual feedback software ‘Sing & See’ in the vocal training of pre‐service music teachers and the teachers' perspective on their experience with VFT. Forty participants from an undergraduate music teacher education programme were randomly assigned to three groups. The first two groups were assigned the teacher and student versions of Sing & See, respectively, and the third group served as a control group without access to the software. The experimental groups were given 12 weeks to use the software for vocal training on a self‐regulated basis. The technique of complex selections (TCS) was designed to assess the pitch accuracy and richness of vocal timbre. Pre‐ and post‐test singing tasks showed that the participants from the experimental groups significantly improved their vocal timbre. A questionnaire survey conducted after the training period found that most of the participants in the experimental s were positive about the effectiveness of VFT software in vocal training. As future leaders in the implementation of music education technology, pre‐service music teachers expressed a positive attitude towards the use of VFT as a technology‐enhanced learning (TEL) component in music education.     

Mechanical,flow, and morphological properties of talc‐ and kaolin‐filled polypropylene hybrid composites

Polypropylene (PP) hybrid composites have been produced by compounding two types of mineral fillers, viz., talc and kaolin with PP copolymer using a twin screw extruder. The PP hybrid composite was injection‐molded into dumbbell specimen for tensile, flexural, and impact properties characterizations. MFI and SEM studies were used to characterize the flow and morphological properties of the PP hybrid composites. The result shows that most of the hybrid composites showed a significant decrease in flow, tensile, flexural, and impact properties compared with the single filler‐filled PP composites. However, a hybridization effect was seen for the PPT20K10 hybrid composites, through the synergistic coalescence of positive characteristics from 20 wt % of talc and 10 wt % of kaolin. This hybrid formulation have given an economically advantageous material with the mechanical properties (tensile, flexural, and impact) comparable to those of the talc‐filled PP composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 434–441, 2007     

Effect of crystallization and interface formation mechanism on mechanical properties of film‐insert injection‐molded poly(propylene) (PP) film/PP substrate

A previous study has shown that the adhesion between the film and substrate of film‐insert injection‐molded poly(propylene) (PP) film/PP substrate was evident with the increases in barrel temperature and injection holding pressure. In this second part of the research work, the crystallinity at the interfacial region (i.e., region between the film and the injected substrate) was extensively studied using FTIR imaging, polarized light microscopy, and DSC in an attempt to determine the level of influence that crystallinity has on the interface and bulk mechanical properties. Consequently, a more thorough and clearer picture of the influence of the inserted film on the interfacial crystallinity and subsequently the substrate mechanical properties, such as peel strength and impact strength, has been revealed. The initial proposition that crystallinity could enhance film–substrate interfacial bonding has been confirmed, judging from the higher peel strength with increasing crystallinity at the interfacial region. Nevertheless, the change in crystallinity was not only confined to the interfacial region. With the film acting as heat‐transfer inhibitor between the injected resin and the mold wall, the total crystal structure of the substrate was substantially altered, which subsequently affected the bulk mechanical properties. The lower impact strength of film‐insert injection‐molded samples compared to that of samples without film inserts provided evidence of how the film could impart inferior properties to the substrate. The difference in cooling rate between the substrate and film might also cause other defects such as warpage and/or residual stress build‐up within the product. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 294–301, 2005     

Self-assembly of C60 containing poly(methyl methacrylate) in ethyl acetate/decalin mixtures solvent

[60]Fullerene (C₆₀) was mono-substituted with well-defined poly(methyl methacrylate) (PMMA-b-C₆₀) using the atom transfer radical polymerization (ATRP) technique. The self-assembly behaviors of PMMA-b-C₆₀ in ethyl acetate (EA) and decalin mixtures were studied using laser light scattering (LLS) and transmission electron microscopy (TEM). Homogeneous solutions of PMMA-b-C₆₀ can be obtained in the solvent mixtures containing more than 40 wt% EA, where the molar ratio of decalin to EA is close to 1. For each solvent mixture, unimers coexist with micelles and large aggregates. The sizes of PMMA-b-C₆₀ micelles and aggregates are independent of polymer concentration, confirming that they are produced via the closed association mechanism. For the various solvent mixtures, the weight-averaged molecular weights, M_w of the PMMA-b-C₆₀ aggregates range from 4.1×10⁷ to 12.5×10⁷ g/mol. The hydrodynamic radii of the large aggregate, R_h, vary from 90 to 136 nm, while the z-averaged radii of gyration, R_g, range from 210 to 311 nm. The R_g/R_h value for each solvent mixture is ∼2.3, which is independent of decalin contents in the mixed solvents. The morphological study using the transmission electron microscope suggests that the large aggregates are composed of porous large compound micelles (LCM) in solution.     

Faceless identification based on temporal strips

This paper first presents a novel approach for modelling facial features, Local Directional Texture (LDT), which exploits the unique directional information in image textures for the problem of face recognition. A variant of LDT with privacy-preserving temporal strips (TS) is then considered to achieve faceless recognition with a higher degree of privacy while maintaining high accuracy. The TS uses two strips of pixel blocks from the temporal planes, XT and YT, for face recognition. By removing the reliance on spatial context (i.e., XY plane) for this task, the proposed method withholds facial appearance information from public view, where only one-dimensional temporal information that varies across time are extracted for recognition. Thus, privacy is assured, yet without impeding the facial recognition task which is vital for many security applications such as street surveillance and perimeter access control. To validate the reliability of the proposed method, experiments were carried out using the Honda/UCSD, CK+, CAS(ME)² and CASME II databases. The proposed method achieved a recognition rate of 98.26% in the standard video-based face recognition database, Honda/UCSD. It also offers a 81.92% reduction in the dimension length required for storing the extracted features, in contrast to the conventional LBP-TOP.

     

Protection of quantum correlations against decoherence

The protection of different quantum correlations, such as Bell nonlocality, quantum discord, and geometric quantum discord as trace distance against noise, is explored. By weak measurement and quantum measurement reversal, we show that the mentioned quantum correlations can be effectively preserved probabilistically from the decoherence due to amplitude damping. The results will play an important role in the experiments using the quantum correlations as resource.     

Dynamic Multiple Swarms in Multiobjective Particle Swarm Optimization

A multiple-swarm multiobjective particle swarm optimization (PSO) algorithm, named dynamic multiple swarms in multiobjective PSO, is proposed in which the number of swarms is adaptively adjusted throughout the search process via the proposed dynamic swarm strategy. The strategy allocates an appropriate number of swarms as required to support convergence and diversity criteria among the swarms. Additional novel designs include a PSO updating mechanism to better manage the communication within a swarm and among swarms and an objective space compression and expansion strategy to progressively exploit the objective space during the search process. Comparative study shows that the performance of the proposed algorithm is competitive in comparison to the selected algorithms on standard benchmark problems. In particular, when dealing with test problems with multiple local Pareto fronts, the proposed algorithm is much less computationally demanding. Sensitivity analysis indicates that the proposed algorithm is insensitive to most of the user-specified design parameters.