Ripple evaluation of high-performance synchronous reluctancemachines

In this article, synchronous reluctance motors with multiple-segment rotor structures are considered. The presence of stator slots is taken into account, with respect to torque ripple. An analytical model is presented, based on magnetic interaction between the d and q axes, due to stator toothing. The effect of skewing is also considered, showing its partial effect on torque ripple reduction, due to the rotor anisotropy. A closed expression for the torque is obtained, giving the torque ripple as a function of design parameters. Experimental verification of the proposed model is given, from measurements on prototype motors     

Ice/metal interfaces: fracture energy and fractography

Results are presented of the fracture tests of ice/metal interfaces in an attempt to utilize fracture mechanics to characterize the failure of ice/solid adhesion. The four-point bending delamination specimen was used to measure the fracture energy of ice/aluminium and ice/steel joints at — 15 °C. The interfacial fracture energy was found to be dependent on ice type and formation procedure of the ice/metal composites. Crack growth was in a manner of asymmetrical bursting, and both cohesive and adhesive failure mechanisms were observed. Although the fracture of ice/metal interfaces was brittle in nature, the evidence of dislocation slip in ice crystals, as revealed by etching and replicating, suggests that microplastic deformations occur in the ice component.     

The As-prepared surfaces of C-axis-oriented Nd1Ba2Cu3Oy thin films characterized using scanning probe microscopes

Recently, superconducting Nd₁Ba₂Cu₃O_y (Ndl23) thin films with high superconducting transition temperature (T _c) have been successfully fabricated at our institute employing the standard laser ablation method. In this paper, we report the results of surface characterization of the Nd123 thin films using an ultrahigh vacuum scanning tunneling microscope/spectroscopy (UHV-STM/STS) and an atomic force microscope (AFM) system operated in air. Clear spiral pattern is observed on the surfaces of Nd123 thin films by STM and AFM, suggesting that films are formed by two-dimensional island growth mode. Contour plots of the spirals show that the step heights of the spirals are not always the integer or half-integer number of thec-axis parameter of the structure. This implies that the surface natural termination layer of the films may not be unique. This result is supported byI-V STS measurements. The surface morphology of the Nd123 thin films is compared with that of thec-axis-oriented Y₁Ba₂Cu₃S_y thin films. Surface atomic images of the as-prepared Nd123 thin films are obtained employing both STM and AFM. STS measurements show that most of the surfaces are semiconductive. The results of STS measurements together with the fact that we are able to see the surface atomic images using scanning probe microscopes suggest that exposure to air does not cause serious degradation to the as-prepared surfaces of Nd123 thin films.     

Characterization of titanium alloy implant surfaces with improved dissolution resistance

The present work sets out to investigate the structure and chemistry of surface treated oxides (either aged in boiling water or air-heated) with improved dissolution resistance compared to conventionally passivated surfaces. X-ray photoelectron spectroscopy (XPS) has demonstrated a significant reduction in oxidized aluminium associated with an ageing-based surface treatment. Angle-dependent XPS has revealed an increase in amphoteric-OH surface sites for the thermal treatments. Atomic force microscopy (AFM) investigation suggests that these sites play a role in the improved proteinadsorption properties of these surfaces. These observations form the basis of a model which describes the influence of surface oxide on the kinetics of metal ion dissolution.     

Optimal discrimination and classification of neuronal actionpotential waveforms from multiunit, multichannel recordings usingsoftware-based linear filters

Describes advanced protocols for the discrimination and classification of neuronal spike waveforms within multichannel electrophysiological recordings. The programs are capable of detecting and classifying the spikes from multiple, simultaneously active neurons, even in situations where there is a high degree of spike waveform superposition on the recording channels. The protocols are based on the derivation of an optimal linear filter for each individual neuron. Each filter is tuned to selectively respond to the spike waveform generated by the corresponding neuron, and to attenuate noise and the spike waveforms from all other neurons. The protocol is essentially an extension of earlier work (S. Andreassen et al., 1979; W.M. Roberts and D.K. Hartline, 1975; R.B. Stein et al., 1979). However, the protocols extend the power and utility of the original implementations in two significant respects. First, a general single-pass automatic template estimation algorithm was derived and implemented. Second, the filters were implemented within a software environment providing a greatly enhanced functional organization and user interface. The utility of the analysis approach was demonstrated on samples of multiunit electrophysiological recordings from the cricket abdominal nerve cord     

A Programmable Pulse Sequence Generator for an NMR Relaxometer

A pulse sequence generator for NMR relaxometer is described. The operation mode is loaded into the internal memory of the device by a program from a personal computer via a PCI bus. The project is realized on two MAX7000S and Cyclone (Altera) chips using the Qartus II 4.0 software. The basic parameters of the device are as follows: the minimal pulse length is 50 ns, the time resolution is 10 ns, the maximum number of pulses is 1024, and the number of controlled output channels is 8. This device, operating in the automatic mode as part of the hardware-software NMR system, makes possible recording, processing, and storing experimental results in electronic form.