Increased concentrations of octachlorodibenzo-p-dioxin in cases with breast cancer--results from a case-control study

Organochlorines are persistent and highly lipophilic environmental contaminants which bioaccumulate in the food chain. Some of these chemicals, 2,2-bis(p-chlorophenyl)-1,1,1-trichloroethane (DDT) and polychlorinated biphenyls (PCBs), have been suggested to be of significance in the aetiology of breast cancer. 2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD) is an anti-oestrogen in animal studies and should be thus lower the risk of breast cancer. The other isomers of polychlorinated dibenzo-p-dioxins (PCDDs) or the chemically related polychlorinated dibenzofurans (PCDFs) have not been tested regarding carcinogenesis of the breast. The purpose of this study was to investigate whether PCDDs or PCDFs influence the risk for breast cancer. Consecutive patients who underwent surgery for a breast disease between 1993 and 1995 were recruited for the study. Cases were 22 patients with infiltrative breast cancer and controls were 19 patients operated for a benign breast disease during the same time period. Approximately 10 g of breast tissue free from tumour was taken from the specimen and frozen until analysis. Fat was extracted, cleaned and analysed with a high-resolution gas chromatograph coupled to a high-resolution mass spectrometer. Median concentrations of octachlorinated dibenzo-p-dioxin (OCDD) were 598 (170-14,880) and 396 (103-1,847) pg/g lipid in the cases and in the controls, respectively. In a multivariate logistic regression analysis controlling for other risk factors for breast cancer increased odds ratio (OR) was obtained for OCDD: 401-1000 pg/g lipid yielded OR 3.8, 95% confidence interval (CI) 0.4-39, > 1000 pg/g lipid gave OR 5.2, CI 0.4-72. When the lipid OCDD variable was examined as a continuous risk factor there was a 1.09 (9%), CI 0.95-1.25, increase in the adjusted OR for breast cancer per 100 unit (pg/g lipid) increase in OCDD. No differences were found between cases and controls for the other six tested PCDDs. Mean concentration of TCDD was in the cases 3.6 (1.0-7.9) and in the controls 3.3 (1.1-6.3) pg/g lipid. For PCDFs no significant differences were found between cases and controls. The results were not changed if oestrogen or progesterone receptor status, S-phase fraction and DNA ploidy were considered. Breast tissue concentration of OCDD was increased in cancer patients, whereas the concentrations of other PCDDs and PCDFs were equal in cases and controls.     

An efficient technique for detecting catastrophic convolutional codes

Catastrophic convolutional codes (CC) cause an infinite number of decoded data bit errors when decoding a finite number of code symbols. A CC displays a catastrophic error propagation if the generating polynomials have a common factor. An efficient algorithm for polynomial factorization in GF(2^m) is used for detecting catastrophic CC for any rate n/m and constraint length k. A general formula is derived to calculate the number of catastrophic codes in any (m, n, k) CC.     

Comment and discussion on digital processing of PD pulses

Some of the more salient aspects of the digital processing technology of PD signals are examined. Most of the efforts in this field are concentrated on the application of digital analyzers for pulse height analysis, pattern recognition and identification of the physical phenomena. It is demonstrated that errors in the signal processing unit can lead to dominant mistakes in the interpretation of the test results     

Modeling of Diffusion in Capillary Porous Materials During the Drying Process

This paper presents a model of heterogenous diffusion in capillary porous materials during the process of drying. The governing heat and mass transfer equations have been established using the liquid as well as vapor flow. Two models have been presented. Model 1 does not consider the heat conduction while the model 2 has been established by considering the conduction. The developed models and the numerical solutions of the resulting differential equations can take into account the moisture and temperature dependent thermophysical properties of the product. All equations have been established in spherical coordinates but the programme written for the purpose of calculations can be used for other geometries also. Numerical calculations have been performed for gas concrete and tiles using model 1, while model 2 has been used for gas concrete only because of the lack of data for thermophysical properties of the tile. For gas concrete it was seen that conduction has only marginal effect on the drying process and the numerical predictions of the drying process were reasonably accurate.     

New method for assessing the global quality of energy systems

Comparisons of various energy systems are often made from partial, limited standpoints that do not take into due consideration the numerous factors involved in such systems. A more complete assessment of the global quality of energy systems must consider a wider range of characteristics, such as: conversion and transportation yields, energy potential, added value, risk of accidents during conversion and transportation, coefficients of transportability and storability, and polluting emissions (carbon monoxide, carbon dioxide, sulphur and nitrogen oxides, unburnt hydrocarbons, dust, radionuclides and dispersed heat).

This paper not only identifies and quantifies the parameters that allow the above qualities to be expressed, but also defines a tree-structured energy-quality index system which starts from the parameters identified and makes it possible to obtain a global summary index, through various intermediate levels of aggregation.

Our objective is to make an instrument available to professionals (engineers, policymakers and energy managers) which allows them to concentrate their attention each time, according to the specific needs in question, on particular aspects of the quality of the energy, or to obtain numerical indicators that briefly express quality in the broadest sense.

In addition, a sample application of the proposed method is presented, using data gathered mainly from the literature on alternative systems for power production and space heating by fossil fuels.     

Behavior of a vibrating wire near the liquid3He-vacuum interface and in a saturated3He-4He mixture

In this paper we describe the effect of the vicinity of a liquid³He-vacuum interface on the behavior of a vibrating wire viscometer. It was found that in the fluid near the liquid interface the quality factor is lower than in the bulk liquid. We further report on the observation of a doubling of the resonance peak of the wire in a saturated³He-⁴He mixture. The frequencies and amplitudes of the two peaks strongly depend on the distance between the phase boundary and the vibrating wire; the temperature and the velocity of the phase boundary have no significant influence on the peak frequencies. The observed peak doubling is attributed to the coupling of the vibrating wire with a standing second-sound wave in the dilute phase where the volume of the dilute phase can be regarded as a resonating cavity for second sound.     

Study of photosensitive mixtures of TMAE and helium, hydrocarbon or CF4-based carrier gases

Among the photocathodes used for particle identification based on the Cherenkov Ring Imaging technique, the TMAE molecule is still the best in terms of quantum efficiency. Despite the fact that TMAE gaseous photocathodes have already been used in a number of large experiments, one still seeks answers to many detailed questions. We present a systematic study of gaseous photocathodes based on TMAE mixed with helium, hydrocarbon and CF₄-based gases at normal pressure. The study includes a measurement of the electron drift velocity, gas quenching properties, single electron pulse height spectra and anode wire aging. The paper makes recommendations for carrier gas mixtures to obtain the best quenching, and suggests how to manage TMAE wire aging. This study was motivated by a specific particle identification detector proposal, the Fast Drift CRID proposed for the B-factory at SLAC.