Failure analysis of ULSI circuits using photon emission

A real-time failure analysis technique for ULSI circuits using photon emission is proposed. This technique utilizes a photon detection system combined with a circuit tester. Improved failure detection is achieved because the tester can bias arbitrary blocks in the ULSI chip. Detecting and correct process defects and design errors improves the reliability of the ULSI chip     

High-speed InGaP/GaAs HBTs with a strained InxGa1-xAs base

A self-aligned InGaP/GaAs heterojunction bipolar transistor with a compositionally graded In_xGa_1-xAs base has been demonstrated with f_T=83 GHz and f_max=197 GHz. To our knowledge, these results are the highest reported for both parameters in InGaP/GaAs HBT's. The graded base, which improves electron transport through the base, results in a DC current gain and a cutoff frequency which are 100% and 20% higher, respectively, than that achieved by an identical device with a nongraded base. The high f_max results from a heavily doped base, self-aligned base contacts, and a self-aligned collector etch. These results demonstrate the applicability of InGaP/GaAs HBT's in high-speed microwave applications     

Transient characteristics of small salient-pole alternators

The use of small alternators, other than for standby purposes, is increasing and this has focused attention on the reliability and utility of the parameters normally quoted for such machines. Test procedures are described and methods used for parameter estimation discussed, with particular emphasis on the difficulties presented by small brushless machines     

Preparation, Physical Characterization, Mechanisms of Drug/Polymer Interactions, and Stability Studies of Controlled-Release Solid Dispersion Granules Containing Weak Base as Active Substance

Verapamil hydrochloride solid dispersion granules were prepared using solvent evaporation technique. Ethyl cellulose, hydroxypropyl cellulose, Eudragit L or Eudragit S were used as polymers for controlling the dissolution rate of the drug substance, and to avoid the continuous decrease of drug dissolution rate at higher pH values. By incorporating Eudragit L in ethyl cellulose network it is possible to prepare controlled-release formulation with increased release rate of active substance (weak base) at higher pH values without causing abrupt drug release at lower pH values. The release rate at low pH values was not highly influenced by Eudragit L content. The behavior of Eudragit L and Eudragit S in coprecipitates was different relating to the solubilization effect and the release of active substance. In order to understand the drug release mechanism better, the release data were tested assuming Higuchi model and first-order kinetic model. Since the calculated correlation coeflcients were very close for both kinetics, to distinguish between the mechanisms the differential forms of first-order and square root of time equation were used. The differential test showed that diffusion-controlled release was operative in solid dispersions, except for series with higher content of Eudragit S. X-ray powder difSraction method, IR spectroscopy studies, and differential thermal analysis were used for physical characterization of coprecipitates and drugpolymer interaction evaluation. After 24 months of real time stability studies, the prepared coprecipitates were still x-ray amorphous, with no changes in their IR spectra and DTA studies. Ehe dissolution rates of the tested formulations showed no significant changes during the stability studies, reflecting the stability of x-ray amorphous drug phase.     

Renal effects of aspirin and low dose methotrexate in rheumatoid arthritis

OBJECTIVES: The aim of this investigation was to study the glomerular and tubular effects of low doses (15 mg) of methotrexate in patients with rheumatoid arthritis with and without combined treatment with aspirin (2 g single dose). METHODS: Renal function was measured by the plasma clearance of EDTA labelled with chromium-51 (51Cr-EDTA) and mercaptoacetyltriglycine labelled with technetium-99m (99mTc-MAG-3). RESULTS: Clearance of 51Cr-EDTA was reduced from 98 (6) to 87 (5) ml/min (mean (SEM)) for patients receiving methotrexate only and further reduced to 76 (5) ml/min for patients receiving methotrexate and aspirin. This effect was reversible as 51Cr-EDTA increased to 85 (6) ml/min during continued treatment with methotrexate alone. Clearance of 99mTc-MAG-3 also decreased from 366 (18) to 315 (17) ml/min in patients receiving methotrexate alone and further to 295 (17) ml/min during treatment with aspirin and methotrexate. Continued treatment with methotrexate alone resulted in a further decrease in the 99mTc-MAG-3 clearance to 253 (17) ml/min. CONCLUSIONS: The study shows that treatment with low doses of methotrexate particularly when combined with aspirin affects glomerular and tubular function. These effects may be of clinical importance and renal function should therefore be monitored with more sensitive methods than serum creatinine as this may not reflect these changes.     

Performance analysis of concurrency control using locking withdeferred blocking

The concurrency control (CC) method employed can be critical to the performance of transaction processing systems. Conventional locking suffers from the blocking phenomenon, where waiting transactions continue to hold locks and block other transactions from progressing. In a high data contention environment, as an increasing number of transactions wait, a larger number of lock requests get blocked and fewer lock requests can get through. The proposed scheme reduces the blocking probability by deferring the blocking behavior of transactions to the later stages of their execution. By properly balancing the blocking and abort effects, the proposed scheme can lead to better performance than either the conventional locking or the optimistic concurrency control (OCC) schemes at all data and resource contention levels. We consider both static and dynamic approaches to determine when to switch from the nonblocking phase to the blocking phase. An analytical model is developed to estimate the performance of this scheme and determine the optimal operating or switching point. The accuracy of the analytic model is validated through a detailed simulation     

Characterization of optoacoustic surgical devices

Describes a measurement technique specially developed to characterize optoacoustic sources. The technique provides a convenient baseline for a comparison of different surgical ultrasonic systems utilizing optoacoustic and ultrasonic transducers. In addition, it provides a well-defined tool to optimize the performance of a variety of designs. Attention is focused on the laser-assisted devices in which appropriately delivered light energy is converted into acoustic shock wave. A meaningful comparison of such devices with other therapeutic equipment designed for a direct interaction with tissue requires knowledge of energy needed for a successful surgical treatment. It is demonstrated that knowledge of the key shock wave parameters allows the total acoustic energy associated with the shock wave to be determined. The procedure developed to calculate this energy is discussed and it is shown that the value of this energy can be conveniently used as an indicator of efficacy of an optoacoustic converter in a clinical environment. The influence of the performance of the polyvinylidene fluoride (PVDF) hydrophone probes on the measurement results was also analyzed. It was determined that when appropriately selected, the wide-band PVDF probes are well suited for characterization of the optoacoustic devices in the frequency range 1-100 MHz. The characterization procedure developed is applicable to surgical ultrasonic systems including conventional and laser-assisted phacoemulsifiers