Formation Mechanisms of Platelet Sr3Ti2O7 Crystals Synthesized by the Molten Salt Synthesis Method

The molten salt synthesis (MSS) method is utilized to synthesize the anisotropic platelet Sr₃Ti₂O₇ (S3T2) single-crystal particles. The aim of this study is to identify the essence of platelet Sr₃Ti₂O₇ crystal growth and guide the synthesis of anisotropic platelet SrTiO₃ crystals as well as various technologically important materials. Based on the results of X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy, the formation mechanism of platelet Sr₃Ti₂O₇ crystals conforms to a nucleation–structure rearrangement–dissolution–diffusion in situ epitaxial growth mechanism model. First, SrCO₃ reacts with TiO₂ to form submicrometer SrTiO₃ nuclei. Then, most of the nuclei surrounded by salt ions aggregate and rearrange to form a large SrTiO₃ matrix. The structural rearrangement and the subsequent in situ epitaxial growth processes control the morphology, composition, and size of the final Sr₃Ti₂O₇ crystals. In the synthesis process, the conversion between SrTiO₃ and Sr₃Ti₂O₇ is as follows: and the crystallographic orientation relationship between Sr₃Ti₂O₇ and SrTiO₃ in the interface is (100)_S3T2//{100}_ST, (010)_S3T2//{010}_ST, and (001)_S3T2//{001}_ST.     

现场总线技术在电力自动化中的应用

现场总线(Fieldbus)是当前自动化领域的热门话题，被誉为自动化领域的计算机局域网。信息技术的飞速发展．引起了自动化系统结构的变革，随着工业电网的日益复杂，人们对电网的安全要求也越来越高。现场总线控制技术作为一门新兴的控制技术必将取代过去的控制方式而应用在电力自动化中。     

Fabrication and amplification of Rhodamine B‐doped step‐index polymer optical fiber

A step‐index polymer optical fiber (SI POF) containing Rhodamine B in poly(methyl methacrylate) (PMMA) has been fabricated by a preform technique. Fluorescence of different fiber lengths were observed and discussed. A high gain (23 dB) for a SI POF with 60‐cm length, 400‐μm diameter was obtained. The Rhodamine B content of the doped SI POF is 5 ppm‐wt. The signal wavelength providing the highest gain for a 60 cm SI POF is around 630 nm, and the optimum fiber length is about 60 cm at 10 kW launched pump power. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 681–685, 2004     

改性活性炭的表面特性及其对苯酚的吸附性能

研究了表面改性对活性炭吸附苯酚性能的影响。研究发现,硫酸氧化可增加活性炭表面酸性基团的含量,提高了活性炭的表面亲水性,降低pHPZC值,因而对吸附水中的苯酚的性能产生明显影响,降低了对苯酚的吸附。     

Fenton氧化法处理废水的机理及应用

阐述了Fenton试剂的氧化机理 ,分析了各项因素对氧化效果的影响。介绍了光 -Fenton法、电 -Fenton法及Fenton -混凝法在废水处理中应用情况以及存在的问题 ,并展望了其发展趋势。     

低熔点合金填充聚合物材料断口形貌研究

研究了合金元素、加工温度、金属含量、第三组分对低熔点金属填充聚合物材料断口形貌的影响。实验结果表明:不同的合金对体系的影响很大,低分子量、低结晶性聚合物,高的成型加工温度可提高材料的相容性。     

转化乳剂的离子电导和光电导研究

本文研究了ＡｇＢｒＣｌ转化乳剂的离子电导和光电导。随着乳剂中溴含量的增高，其离子电导也随之升高，而光电子寿命则降低。ＡｇＢｒＣｌ乳剂的离子电导主要取决于其组成；ＡｇＢｒＣｌ转化乳剂的光电子寿命主要受隙间银子浓度的影响，隙间银离子浓度越大，光电子寿命越短。     

Seeded Crystallization of Leucite

The leucite crystallization kinetics from a hydrothermally derived precursor seeded with nano-crystalline leucite was investigated by X-ray diffraction and non-isothermal differential thermal analysis. The nano-crystalline leucite was prepared by high-energy milling of high-purity leucite powder and the leucite precursor was prepared by the hydrothermal method of silica sol, aluminum nitrate, and potassium nitrate. After the seeds were introduced, the crystallization temperature of the precursor was lowered by 100°C and the transition phase kalsilite did not appear during the crystallization process. When the seeded precursor was heat treated at 700°C, a small amount of cubic leucite was stabilized to room temperature. The seeded precursor showed an exothermic peak between 800° and 920°C under different heating rates. The activation energy for the growth of leucite from the seeded precursor was 256(SD9) kJ/mol.     

一种基于网络信息平台的影像显示方法

针对大幅面遥感影像显示时兼顾大范围和高分辨率的要求,提出了一种基于计算机网络和地理信息平台的显示方法。通过调度局域网中多台计算机终端进行配合,使不同终端同时显示一幅超大影像的不同部分,相邻终端显示影像的位置无缝衔接,实现了低成本对一幅超大影像高分辨率、大范围显示的效果。该方法具有很好的扩展性,理论上可以实现对任意大的影像进行高分辨率显示。     

黄荆提取物对几种害虫的杀虫活性

研究了黄荆种子二氯甲烷提取物对5种害虫的杀虫活性以及对天敌异色瓢虫的安全性。结果表明：黄荆提取物对菜青虫、小菜蛾、麦长管蚜和桃蚜都有较高的杀虫活性，尤其是对菜青虫的活性最高，稀释100倍，处理4龄幼虫死亡率可达93．3％。但对大猿叶甲的杀虫活性则很低。黄荆提取物对异色瓢虫幼虫有一定的杀虫活性，但对其成虫无任何影响。本研究结果为开发利用这一新的杀虫植物资源提供了依据。