Relaxing the maximum dc input amplitude vs. consumption trade‐off in differential‐input band‐pass biquad filters

This paper shows that an important part of the power consumption of a biquad band‐pass filter is associated with the feedback loop that fixes the high‐pass frequency and blocks the direct current (dc) input signals. The dc input amplitude that can be blocked is related to the maximum output current that one of the transconductors can provide, hence impacting on the required consumption through this effect. Then, a technique that efficiently blocks the dc input signal and fixes the high‐pass frequency is introduced and analyzed in depth. Moreover, an architecture for ultra‐low‐power differential‐input biquads is fully presented. The proposed architecture enables lowering the power consumption or blocking higher levels of dc input without jeopardizing the power consumption. Results show that the proposed architecture, compared with a traditional one, presents a 30% reduction in power consumption and more than doubles the dc input that can be blocked. Copyright © 2016 John Wiley & Sons, Ltd.     

Quality assessment of dehydrated red bell pepper using tempering drying cycles

Quality assessment of red bell pepper dices preserved through batch dehydration introducing tempering cycles were performed in this work. The parameters considered were: the percentages of ascorbic acid and final antioxidant activity retention, as well as the influence of calcium chloride on diffusivity and colour values. Although, a similar final moisture content was reached through different red bell pepper dehydration processes, but the one with tempering cycles had better qualities than those without tempering. Ascorbic acid and final antioxidant activity retention showed higher values and so were colour intensities compared to control samples in all cases. In respect to the effective diffusivity coefficients, there was an increment as the calcium chloride concentration increased. As of the treatments with tempering cycles, the best scheme was 15 min drying time and 30 min tempering time at 60 °C.     

Distribution planning with reliability options for distributed generation

The promotion of electricity generation from renewable energy sources (RES) and combined heat and power (CHP) has resulted in increasing penetration levels of distributed generation (DG). However, large-scale connection of DG involves profound changes in the operation and planning of electricity distribution networks. Distribution System Operators (DSOs) play a key role since these agents have to provide flexibility to their networks in order to integrate DG. Article 14.7 of EU Electricity Directive states that DSOs should consider DG as an alternative to new network investments. This is a challenging task, particularly under the current regulatory framework where DSOs must be legally and functionally unbundled from other activities in the electricity sector. This paper proposes a market mechanism, referred to as reliability options for distributed generation (RODG), which provides DSOs with an alternative to the investment in new distribution facilities. The mechanism proposed allocates the firm capacity required to DG embedded in the distribution network through a competitive auction. Additionally, RODG make DG partly responsible for reliability and provide DG with incentives for a more efficient operation taking into account the network conditions.     

Influence of deposited amine-functionalized Si-MCM-41 in polyacrylonitrile electrospun membranes applied for separation of water in oil emulsions

Among several oil/water emulsion separation technologies, the utilization of nanoparticle-decorated membranes with diverse functionalities has received considerable attention in recent years, particularly if the antifouling capacity can be improved. In this article, we propose a new membrane based on surface-hydrolyzed polyacrylonitrile electrospun membranes and/or decorated with amine-functionalized Si-MCM-41 nanoparticles to be used as oil/water emulsion separation treatment and to determine their antifouling ability. X-Ray photoelectron spectrometry, attenuated total reflectance Fourier transform infrared spectroscopy, and toluidine blue O assay, scanning electron microscopy, contact angle measurements for oil under water and thermogravimetry were used for characterizing the membranes and an assay of permeability was developed to quantify the diffusion of oil molecules across the electrospun membrane. The electrospun and/or decorated membranes showed an underwater oleophobic wettability, which can separate oil-in-water emulsions with 87% separation efficiency, results of fouling experiments, evaluated in terms of rejection and flux recovery ratio, exhibited good antifouling ability, but the membrane decoration process did not lead to superior outcomes compared with undecorated membranes.     

Human-Induced Neural and Mesenchymal Stem Cell Therapy Combined with a Curcumin Nanoconjugate as a Spinal Cord Injury Treatment

We currently lack effective treatments for the devastating loss of neural function associated with spinal cord injury (SCI). In this study, we evaluated a combination therapy comprising human neural stem cells derived from induced pluripotent stem cells (iPSC-NSC), human mesenchymal stem cells (MSC), and a pH-responsive polyacetal–curcumin nanoconjugate (PA-C) that allows the sustained release of curcumin. In vitro analysis demonstrated that PA-C treatment protected iPSC-NSC from oxidative damage in vitro, while MSC co-culture prevented lipopolysaccharide-induced activation of nuclear factor-κB (NF-κB) in iPSC-NSC. Then, we evaluated the combination of PA-C delivery into the intrathecal space in a rat model of contusive SCI with stem cell transplantation. While we failed to observe significant improvements in locomotor function (BBB scale) in treated animals, histological analysis revealed that PA-C-treated or PA-C and iPSC-NSC + MSC-treated animals displayed significantly smaller scars, while PA-C and iPSC-NSC + MSC treatment induced the preservation of β-III Tubulin-positive axons. iPSC-NSC + MSC transplantation fostered the preservation of motoneurons and myelinated tracts, while PA-C treatment polarized microglia into an anti-inflammatory phenotype. Overall, the combination of stem cell transplantation and PA-C treatment confers higher neuroprotective effects compared to individual treatments.     

Farm-scale carbon and nitrogen fluxes in pastoral dairy production systems using different nitrogen fertilizer regimes

Nutrient Cycling in Agroecosystems - The nitrogen (N) fertilizer application rate (kg ha?1 year?1) in pastoral dairy systems affects the flow of N through the soil,...     

CNBP Binds and Unfolds In Vitro G-Quadruplexes Formed in the SARS-CoV-2 Positive and Negative Genome Strands

The Coronavirus Disease 2019 (COVID-19) pandemic has become a global health emergency with no effective medical treatment and with incipient vaccines. It is caused by a new positive-sense RNA virus called severe acute respiratory syndrome-related coronavirus 2 (SARS-CoV-2). G-quadruplexes (G4s) are nucleic acid secondary structures involved in the control of a variety of biological processes including viral replication. Using several G4 prediction tools, we identified highly putative G4 sequences (PQSs) within the positive-sense (+gRNA) and negative-sense (−gRNA) RNA strands of SARS-CoV-2 conserved in related betacoronaviruses. By using multiple biophysical techniques, we confirmed the formation of two G4s in the +gRNA and provide the first evidence of G4 formation by two PQSs in the −gRNA of SARS-CoV-2. Finally, biophysical and molecular approaches were used to demonstrate for the first time that CNBP, the main human cellular protein bound to SARS-CoV-2 RNA genome, binds and promotes the unfolding of G4s formed by both strands of SARS-CoV-2 RNA genome. Our results suggest that G4s found in SARS-CoV-2 RNA genome and its negative-sense replicative intermediates, as well as the cellular proteins that interact with them, are relevant factors for viral genes expression and replication cycle, and may constitute interesting targets for antiviral drugs development.     

Montmorillonite as support for peroxide in the melt grafting of maleic anhydride onto polypropylene

Grafting of maleic anhydride onto polypropylene was performed in a Haake torque rheometer, in the presence of organically modified montmorillonite, MMT (used as support for the peroxide), according to a 2³ factorial design, where the maleic anhydride concentration (C_MA), peroxide concentration (C_per) and reaction time (t_r) were varied. For comparison, the reaction in the absence of MMT was also conducted. Polypropylene degradation was assessed by parallel plate rheometry and size exclusion chromatography (SEC) and percentage of reacted maleic anhydride (%MA_g) was obtained by titration and FTIR spectroscopy. The results showed differences in both systems, conventional and in the presence of MMT. The structure of polypropylene grafted with maleic anhydride, PP‐g‐MA, indicates longer branches are formed in the presence of MMT compared to in its absence, demonstrated by FTIR analysis. As in conventional reaction systems, an increase in C_per caused an increase in %MA_g and a reduction in molar mass. The variable C_MA showed to be not significant in the grafting reaction in the presence of MMT, even at high DCP levels, at a 5% significance level. On the other hand, increase in C_MA resulted in significant increase in viscosity. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44134.