化学微交联聚氯乙烯的结构和性能

通过氯乙烯/邻苯二甲酸二烯丙酯(VC/DAP)悬浮共聚,合成了含部分凝胶结构的化学微交联PVC树脂,对微交联PVC的玻璃化转变行为、加工性能、消光性能、加热-形变行为和力学性能进行了研究。当DAP用量在0.25%mol以下时,PVC的玻璃化温度变动不大。凝胶含量的增加将导致交联PVC_d~T的光泽度下降,消光性能提高;塑化时间和加工扭矩均增加,加工性能急剧变差;加热变形值下降,最高使用温度提高。凝胶对PVC拉伸性能的影响较为复杂,但压缩永久变形则随凝胶含量的增加而下降,材料的弹性性能逐渐提高。     

施釉机器人静力学分析的研究

根据6自由度施釉机器人的终端受力，利用雅可比矩阵，求解出各转动关节在稳定平衡状态下的受力和所需的驱动力矩，为设计施釉机器人确定各转轴的电机及其他动力元件提供了可靠的依据。     

高聚合度聚氯乙烯的加工性能

本文对高聚合度聚氯乙烯(H-PVC)的发展及其优异的物理机械性能作了简要介绍;着重分析了H-PVC的加工性能和表征方法,并讨论了分子特性和颗料特性及加工组成、加工条件对加工性能的影响,提出了改进H-PVC加工性能的方法。     

TDE-85环氧树脂丙烯酸酯的合成及其UV固化特性的研究

本文研究了TDE-85环氧树脂丙烯酸酯的合成方法，讨论了合成条件（催化剂的种类与用量，反应温度及时间，投料比，反应类型及不饱和酸种类的选择等）对合成反应及合成产物性状的影响。另外，还考察了该合成产物的UV固化特性。     

Dendron-functionalized perylene diimides with carrier-transporting ability for red luminescent materials

This paper presents a series of dendrimers via a convergent synthetic approach with three generations, which contain perylene diimide cores, Fréchet-type poly(aryl ether) dendrons, and carbazole (CZ) or oxadiazole (OXZ) peripheral functional groups. The higher generation dendrimer has an obvious site-isolation or dilution effect of dendrons, which results in a relatively small red-shift of absorption and emission spectra when it forms a solid thin film for applications. The interactions between peripheral units and perylene diimide core in the dendrimers are also studied by steady-state and time-resolved fluorescence spectra under both direct and indirect excitation. The fluorescence data show that there exist two possible mechanisms, Förster energy transfer (FRET) and photo-induced electron transfer (PET), for dendrimers bearing carbazole units. No enhanced core fluorescence is observed because the energy transfer or light-harvesting potential of peripheral carbazole is counteracted by PET. While for dendrimers bearing oxadiazole units, no PET can take place between OXZ and perylene diimide since both of them are high electron affinity. The FRET and higher light-harvesting ability of oxadiazole without PET interfering result in the distinct enhancement of core emission in higher generation dendrimers. DSC results indicate that the incorporation of Fréchet-type poly(aryl ether) dendrons can improve the amorphous property and increase glass transition temperature (T_g). The preliminary EL results with single-layer architectures demonstrate that these dendrimers could be utilized as a promising kind of active red luminescent emitters with carrier-transporting ability. EL emission has the same recombination zone as PL, indicating that the recombination of excitons in fabricated EL devices is not close to cathode or anode vicinity. It is suggested that the site-isolation effect of dendron wedges is attributed to prevent the core luminorphores from approaching electrodes efficiently.     

辊道窑烧嘴喷射角度对窑内湍流气流影响的研究

应用k -ε两方程湍流模型 ,对辊道窑烧成带的湍流旋流流动进行了理论分析 ,并用计算流体力学软件Fluent进行数值模拟 ,研究了烧嘴的喷射角度对烧成带内的湍流旋流流动的影响及其对制品烧成的作用     

Effects of the solvent polarity on the atom transfer radical polymerization of methyl methacrylate initiated by 4‐(chloromethyl)phenyltrimethoxysilane

The controllability of the atom transfer radical polymerization of methyl methacrylate in the polar solvent N,N‐dimethylformamide and the nonpolar solvent xylene with 4‐(chloromethyl)phenyltrimethoxysilane as an initiator and with CuCl/2,2′‐bipyridine and CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as catalyst systems was studied. Gel permeation chromatography analysis established that in the nonpolar solvent xylene, much better control of the molecular weight and polydispersity of poly(methyl methacrylate) was achieved with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system than with the CuCl/2,2′‐bipyridine as catalyst system. In the polar solvent N,N‐dimethylformamide, unlike in xylene, the polymerization was more controllable with the CuCl/2,2′‐bipyridine catalyst system than with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2751–2754, 2007     

PTA装置改造中的技术探讨

概述了天津石化公司 2 50 kt/ a PTA装置一期 4个系统和空压机等方面的改造 ,对进一步改造将遇到的空压机系统、氧化反应器及其顶部冷凝系统、醋酸脱水塔系统、加氢预热系统、干燥机系统的有关问题进行了探讨 ,并提出进行设备极限能力标定、在操作时间上挖潜及进一步优化二期改造方案的若干建议。     

焊接工艺规程管理系统──计算机在焊接中的应用

介绍了用于编制焊接工艺规程的管理系统。该系统的特点是方便适用，应用范围广泛。