Reliability and maintainability analysis to improve the operation of the limoncello production line

The reliability, maintainability, failure rate and repair rate models of a limoncello automated production line for a period of 8 months at machine and entire line level were carried out. It was pointed out that (i) the real operating time of the limoncello production line (LPL) is 89.35%, whereas for the rest 10.65%, the LPL is under repair, (ii) the Weibull distribution provided the best fit of the failure data for the LPL to describe the time‐between‐failures (TBFs), whereas the time‐to‐repairs (TTRs) are lognormal distributed, and (iii) the failure rate of the production line increases, implying that the current maintenance strategy is not adequate and must be improved. This particular methodology can also be utilised in the beverage industry sector by the machinery manufacturers and the manufacturers of bottled products to improve the design and operation management of the bottling production line.     

Relay pursuit of a maneuvering target using dynamic Voronoi diagrams

This paper addresses the problem of the pursuit of a maneuvering target by a group of pursuers distributed in the plane. This pursuit problem is solved by associating it with a Voronoi-like partitioning problem that characterizes the set of initial positions from which the target can be intercepted by a given pursuer faster than any other pursuer from the same group. In the formulation of this partitioning problem, the target does not necessarily travel along prescribed trajectories, as it is typically assumed in the literature, but, instead, it can apply an “evading” strategy in an effort to delay or, if possible, escape capture. We characterize an approximate solution to this problem by associating it with a standard Voronoi partitioning problem. Subsequently, we propose a relay pursuit strategy, that is, a special group pursuit scheme such that, at each instant of time, only one pursuer is assigned the task of capturing the maneuvering target. During the course of the relay pursuit, the pursuer–target assignment changes dynamically with time based on the (time varying) proximity relations between the pursuers and the target. This proximity information is encoded in the solution of the Voronoi-like partitioning problem. Simulation results are presented to highlight the theoretical developments.     

<Superscript>1</Superscript>H-NMR Spectroscopy as a New Tool in the Assessment of the Oxidative State in Edible Oils

Within the course of lipid peroxidation, hydroperoxides are formed as primary products. They can be used as analytical markers to assess the deterioration status of oils and fats. Here a new ¹H-NMR assay to determine the hydroperoxide amount in edible oils is presented. We were able to show that the analytical performance of the method is similar to that of the commonly used peroxide value (PV) according to Wheeler. A total of 290 edible oil samples were analyzed using both methods. For some oil varieties considerable discrepancies were found between the results obtained. In the case of black seed and olive oil, two substances could be identified that cause positive (black seed oil) and negative (olive oils) deviations from the theoretical PV expected from the NMR values.     

Design issues and implications for structural integrity of fusion power plant components

The criteria and implications for successful design, licensing and power plant operation are assessed, and imposed constraints and limitations are examined. The design of a reliable fusion power plant is dependent on the availability of licensed nuclear materials and the structural-thermal loading conditions during normal and abnormal events. Various conditions in a tokamak lead to structural damage and possible failure. Taking into consideration all the possible structural failure mechanisms, the most likely are combinations of fatigue and creep. Issues encountered in the fusion environment are the significant amount of irradiation creep, the large ratio of helium production to displacement damage, and the degradation of fatigue strength and ductility, effects which are even encountered at low temperatures. Design codes distinguish between failure criteria under steady and transient loads, and lay down rules for failure prediction under combined creep-fatigue conditions. Currently, there are no established fusion specific licensing processes or component design codes. Any limits imposed on designs or performance are taken from existing design codes developed by the fission industry. There is a need to initiate the process of defining and developing tools for the design and licensing of fusion components and facilities to ensure nuclear safety.     

Design Signals: The Role of Software Architecture and Paradigms in Design Thinking and Practice

Does the ontology of design software influence built form? Panagiotis Michalatos , lecturer in architectural technology at Harvard Graduate School of Design and a principal research engineer at Autodesk, Inc, here looks at how the move from drawing typologies to digital modelling since the mid-1990s has affected architectural aesthetics. He goes on to examine two more recent developments that may announce a further paradigm shift: granular tracking of design input, and data organisation practices in biomedics which, transferred to architecture, could allow for a more spatio-temporal approach.     

Structure–properties investigations in hydrophilic nanocomposites based on polyurethane/poly(2–hydroxyethyl methacrylate) semi‐interpenetrating polymer networks and nanofiller densil for biomedical application

Nanocomposites based on sequential semi–interpenetrating polymer networks (semi–IPNs) of crosslinked polyurethane and linear poly(2‐hydroxyethyl methacrylate) filled with 1–15 wt % of nanofiller densil were prepared and investigated. Nanofiller densil used in an attempt to control the microphase separation of the polymer matrix by polymer–filler interactions. The morphology (SAXS, AFM), mechanical properties (stress–strain), thermal transitions (DSC) and polymer dynamics (DRS, TSDC) of the nanocomposites were investigated. Special attention has been paid to the raising of the hydration properties and the dynamics of water molecules in the nanocomposites in the perspective of biomedical applications. Nanoparticles were found to aggregate partially for higher than 3 and 5 wt % filler loading in semi–IPNs with 17 and 37 wt % PHEMA, respectively. The results show that the good hydration properties of the semi–IPN matrix are preserved in the nanocomposites, which in combination with results of thermal and dielectric techniques revealed also the existence of polymer–polymer and polymer–filler interactions. These interactions results also in the improvement of physical and mechanical properties of the nanocomposites in compare with the neat matrix. The improvement of mechanical properties in combination with hydrophilicity and biocompatibility of nanocomposites are promising for use these materials for biomedical application namely as surgical films for wound treatment and as material for producing the medical devises. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43122.     

Dielectric and thermal studies of segmental dynamics in silica/PDMS and silica/titania/PDMS nanocomposites

Effects of silica and silica/titania nanoparticles on glass transition and segmental dynamics of poly(dimethylsiloxane) (PDMS) were studied for composites of a core–shell type using differential scanning calorimetry, thermally stimulated depolarization current, and dielectric relaxation spectroscopy techniques. Strong interactions between the filler and the polymer suppress crystallinity (T_c, X_c) and affect significantly the evolution of the glass transition in the nanocomposites. The segmental relaxation associated with the glass transition consists of three contributions, arising, in the order of decreasing mobility, from the bulk (unaffected) amorphous polymer fraction (α relaxation), from polymer chains restricted between condensed crystal regions (α_c relaxation), and from the semi‐bound polymers in an interfacial layer with strongly reduced mobility due to interactions with surface hydroxyls of silica and silica/titania nanoparticles (α′ relaxation). The evolution of surface affected CH₃ groups, as well as the degree of interaction of PDMS molecules with surface hydroxyl groups as a function of treatment temperature, was assessed by Fourier transform infrared spectroscopy, thermogravimetry and differential thermal analysis. The effectiveness of silica/PDMS and silica/titania/PDMS nanocomposites as hydrophobic coatings was investigated by static contact angle measurements. It was shown that the presence of titania nanoparticles and adsorbed PDMS promotes the hydrophobic properties of the PDMS coating after treatment in the 80–650°C range. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41154.