On the thermomechanical behavior of the European target assembly design of IFMIF-EVEDA lithium test loop under start-up transient scenarios

Uncoupled thermomechanical transient analyses have been carried out to investigate the behavior of IFMIF-EVEDA lithium test loop bayonet backplate target assembly under two selected start-up transient operational scenarios. The first transient scenario considered foresees that the target assembly, starting from the initial uniform temperature of 50 °C, is heated up uniquely by convective heat transfer with lithium, flowing from inlet to outlet nozzle at its reference nominal temperature and pressure, until its nominal steady state thermal field distribution is reached. The second transient scenario foresees, more realistically, that the target assembly, starting from the uniform temperature of 50 °C, is initially warmed-up by electric heaters mounted onto its main accessible surfaces and, subsequently, by convective heat transfer with lithium reference flow, until nominal steady state conditions are reached. Heaters have been supposed to operate in an on/off stepwise mode, resulting to be alternatively switched on and off in order to allow the target assembly thermal field to grow up minimizing thermal gradients. To this purpose, a parametric analysis has been performed to realistically assess, for each electric heater, its heat flux and duty-cycle. Numerical results obtained are presented and critically discussed.     

Putative Circulating MicroRNAs Are Able to Identify Patients with Mitral Valve Prolapse and Severe Regurgitation

Mitral valve prolapse (MVP) associated with severe mitral regurgitation is a debilitating disease with no pharmacological therapies available. MicroRNAs (miRNA) represent an emerging class of circulating biomarkers that have never been evaluated in MVP human plasma. Our aim was to identify a possible miRNA signature that is able to discriminate MVP patients from healthy subjects (CTRL) and to shed light on the putative altered molecular pathways in MVP. We evaluated a plasma miRNA profile using Human MicroRNA Card A followed by real-time PCR validations. In addition, to assess the discriminative power of selected miRNAs, we implemented a machine learning analysis. MiRNA profiling and validations revealed that miR-140-3p, 150-5p, 210-3p, 451a, and 487a-3p were significantly upregulated in MVP, while miR-223-3p, 323a-3p, 340-5p, and 361-5p were significantly downregulated in MVP compared to CTRL (p ≤ 0.01). Functional analysis identified several biological processes possible linked to MVP. In addition, machine learning analysis correctly classified MVP patients from CTRL with high accuracy (0.93) and an area under the receiving operator characteristic curve (AUC) of 0.97. To the best of our knowledge, this is the first study performed on human plasma, showing a strong association between miRNAs and MVP. Thus, a circulating molecular signature could be used as a first-line, fast, and cheap screening tool for MVP identification.     

Determination of pyrethroids in chicken egg samples: development and validation of a confirmatory analytical method by gas chromatography/mass spectrometry

The aim of this study was to develop and validate an efficient analytical method based on gas chromatography/tandem mass spectrometry (GC/MS/MS) for detection and quantification of six pyrethroids residues (Phenothrin, Permethrin, Cyfluthrin, Cypermethrin, Deltamethrin and Fenvalerate) in chicken eggs. The method was based on a preliminary liquid–liquid extraction of albumen‐free yolk samples, followed by a clean‐up by solid‐phase extraction. GC/MS/MS analyses were carried out in the selected reaction monitoring mode. Validation parameters such as specificity, detection capability, decision limit, precision, recovery, stability and ruggedness were determined, resulting in compliance with Decision 2002/657/EC. No complicated apparatus are required; moreover, low volumes of organic solvents and a nonintensive manual labour are required. These low costs and simple procedure, based on rapid and safe operations, may represent a useful tool in the routine analysis of pyrethroids pesticides, in the place of the currently used conventional techniques.     

Positron Emitting Magnetic Nanoconstructs for PET/MR Imaging

Hybrid PET/MRI scanners have the potential to provide fundamental molecular, cellular, and anatomic information essential for optimizing therapeutic and surgical interventions. However, their full utilization is currently limited by the lack of truly multi‐modal contrast agents capable of exploiting the strengths of each modality. Here, we report on the development of long‐circulating positron‐emitting magnetic nanoconstructs (PEM) designed to image solid tumors for combined PET/MRI. PEMs are synthesized by a modified nano‐precipitation method mixing poly(lactic‐co‐glycolic acid) (PLGA), lipids, and polyethylene glycol (PEG) chains with 5 nm iron oxide nanoparticles (USPIOs). PEM lipids are coupled with 1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid (DOTA) and subsequently chelated to ⁶⁴Cu. PEMs show a diameter of 140 ± 7 nm and a transversal relaxivity r₂ of 265.0 ± 10.0 (mM × s)^?1, with a r₂/r₁ ratio of 123. Using a murine xenograft model bearing human breast cancer cell line (MDA‐MB‐231), intravenously administered PEMs progressively accumulate in tumors reaching a maximum of 3.5 ± 0.25% ID/g tumor at 20 h post‐injection. Correlation of PET and MRI signals revealed non‐uniform intratumoral distribution of PEMs with focal areas of accumulation at the tumor periphery. These long‐circulating PEMs with high transversal relaxivity and tumor accumulation may allow for detailed interrogation over multiple scales in a clinically relevant setting.     

Experiments and modeling of discharge characteristics in water-mist sprays generated by pressure-swirl atomizers

Pressure-swirl atomizers are often employed to generate a water-mist spray,typically employed in fire suppression.In the present study,an experimental characterization of dispersion(velocity and cone angle)and atomization(drop-size axial evolution)was carried out following a previously developed methodology,with specific reference to the initial region of the spray.Laser-based techniques were used to quantitatively evaluate the considered phenomena:velocity field was reconstructed through a Particle Image Velocimetry analysis;drop-size distribution was measured by a Malvern Spraytec device,highlighting secondary atomization and subsequent coalescence along the spray axis.Moreover,a comprehensive set of relations was validated as predictive of the involved parameters,following an inviscid-fluid approach.The proposed model pertains to early studies on pressure-swirl atomizers and primarily yields to determine both initial velocity and cone angle.The spray thickness is also predicted and a classic correlation for Sauter Mean Diameter is shown to provide good agreement with experimental results.The analysis was carried out at the operative pressure of 80 bar;two injectors were employed featuring different orifice diameters and flow numbers,as a sort of parametric approach to this spray typology.     

Synthesis and characterization of conjugated polymers for the obtainment of conductive patterns through laser tracing

This article describes the preparation of thin films of conjugated polymers which can enhance their specific electrical conductivity by several orders of magnitude by changing their state from insulating to conducting materials. The examined polymers, i.e., a polyacetylenic and a polythiophenic derivative, are functionalized with thioalkylic side chains and are soluble in common organic solvents from which they lead to thick homogeneous films. The films can be deposited on different substrates, either rigid or flexible, and can be easily exposed to laser radiation to make them conductive. The process is irreversible, and the final conductivity is stable over time, even in the presence of high temperatures (up to 180 °C), moisture, and air. The high stability of treated samples, easy polymer synthesis and quick and inexpensive suitably tailored laser tracing procedure make these materials very promising for applications in organic electronics and in the development of new electronic circuitry.