A Langrangian Study of Solids Suspension in a Stirred Vessel by Positron Emission Particle Tracking (PEPT)

A technique of Positron Emission Particle Tracking (PEPT) was used to obtain information on the flow behavior of coarse particles suspended in pseudoplastic liquids agitated by axial‐hydrofoil Lightnin impellers A320 and A410. PEPT enables the position of a 600 μm radioactive particle tracer inserted inside one of the suspended particles to be detected many times per second and its full trajectory followed inside the vessel. Particle trajectory analysis yielded information on particle circulation, velocity distribution, and spatial occupancy. The minimum speed for complete particle suspension, N_js, was also determined. The well‐known Zwietering correlation failed to predict the measurements by a substantial margin, suggesting that it is inadequate for viscous non‐Newtonian liquids.     

Determining robust reaction kinetics from limited data

Accurate chemical kinetics are essential for reactor design and operation. However, despite recent advances in “big data” approaches, availability of kinetic data is often limited in industrial practice. Herein, we present a comparative proof-of-concept study for kinetic parameter estimation from limited data. Cross-validation (CV) is implemented to nonlinear least-squares (LS) fitting and evaluated against Markov chain Monte Carlo (MCMC) and genetic algorithm (GA) routines using synthetic data generated from a simple model reaction. As expected, conventional LS is fastest but least accurate in predicting true kinetics. MCMC and GA are effective for larger data sets but tend to overfit to noise for limited data. LS-CV strongly outperforms these methods at much reduced computational cost, especially for significant noise. Our findings suggest that implementation of CV with conventional regression provides an efficient approach to kinetic parameter estimation with high accuracy, robustness against noise, and only minimal increase in complexity.     

Model oxide-supported metal catalysts: energetics,particle thicknesses,chemisorption and catalytic properties

Many industrially important catalysts consist of late transition metal particles supported on the surfaces of oxide materials. Our studies of such systems using model catalysts consisting of metal films vapor deposited onto the surfaces of single-crystalline oxides are reviewed here. Systems studied include Cu on ZnO, Pt on ZnO, Au on TiO₂ and Cu, Ag and Pb on MgO. A unique adsorption microcalorimeter was developed to measure directly the energetic stability of the metal atoms on the oxide surfaces and the adhesion energy at the metal/oxide interface, which clarify the structural and chemisorption properties of the ultrathin metal particles. The structure of the oxide surface and the metal particles was elucidated by low-energy electron diffraction (LEED), low-energy ion scattering spectroscopy (ISS), angular-resolved X-ray photoelectron spectroscopy (XPS) and X-ray photoelectron diffraction (XPD). The electronic character of the metal particles was revealed by XPS, Auger electron spectroscopy (AES), band-bending and work function measurements. Sintering rates were measured by temperature-programmed ion scattering spectroscopy (TPISS). The chemisorption properties of these particles and their catalytic reactivity were monitored by mass spectroscopy and temperature-programmed desorption (TPD).     

Iron antimony oxide selective oxidation catalysts – an inelastic neutron scattering study

The inelastic neutron scattering spectra of allyl iodide (3-iodopropene, CH₂=CHCH₂I) and allylpalladium chloride, and allyl iodide dosed onto activated iron(III) oxide and iron antimonate catalysts at room temperature have been determined to characterise the adsorbed allyl species. The spectra are energy loss vibrational spectra in the range 16–4000 cm⁻¹. Allyl iodide is not decomposed on the surface and interacts through the localised C = C bond, more strongly with iron antimonate than with iron(III) oxide. This revised version was published online in August 2006 with corrections to the Cover Date.     

Rubber modification of low temperature cure cyanate ester matrices and the performance in glass fabric composites

Low temperature cure cyanate ester resin systems were developed and modified with epoxy‐terminated butadiene acrylonitrile rubber (ETBN) and impregnated into woven glass fabric. Mode I and mode II interlaminar fracture toughness values of the cured laminates were evaluated as a function of rubber concentration. Mode I fracture toughness increased to almost twice that of the unmodified system, while mode II fracture toughness remained essentially unchanged. Composite samples were subjected to aging experiments in water and the absorption/desorption behavior was investigated as was the effect on thermal performance. The presence of rubber was found to reduce the rate of matrix deterioration but also caused a substantial increase in water uptake. It was found that although the addition of rubber to the matrices decreased the unconditioned (dry) T_g all specimens showed the same reduction in T_g, after equilibrium water absorption.     

Scintillation from Eu2+ in Nanocrystallized Glass

A Eu²⁺-doped SiO₂–Al₂O₃–CaO–CaF₂ glass was prepared and converted into a transparent glass ceramic by heat treatment. The crystalline phase and its size were determined by X-ray diffraction and a transmission electron microscopy. The scintillation of Eu²⁺ ions in both glass and ceramic under X-ray excitation was investigated and compared with that in a single-crystal scintillator.     

金属推型V-带无级变速箱损耗机理仿真部分1:带组摩擦造成的转矩损失

以推型金属带为基体的无级变速箱(CVT)的动力传递效率低于有级变速箱,大家已往认识到采用CVT改进发动机/负荷匹配新取得的燃料经济性的好处有被取消的趋势.本组三篇论文详细阐述了发生在作为第一级用来取得效率改进的带传动中损耗机理的研究.已经进行试验研究了涉及推型金属V-带CVT空载和低载的转矩损失.本第一篇论文述及发生在金属带CVT由于带推块和带间相对运动造成主要转矩损失的新分析方法.本研究考虑到其他研究中的新发现并改进了金属V-带的设计.本文中采用几种不同的试验方法提供的实验数据推荐了转矩损失的数字模型.本组第二篇论文阐述了由于带轮变形的许多附加转矩损失机理.在第三篇论文中阐述了根据本文的发现提出带滑动损失的分析.     

Development and Characterization of a Multiplex Assay to Quantify Complement-Fixing Antibodies against Dengue Virus

Antibodies capable of activating the complement system (CS) when bound with antigen are referred to as “complement-fixing antibodies” and are involved in protection against Flaviviruses. A complement-fixing antibody test has been used in the past to measure the ability of dengue virus (DENV)-specific serum antibodies to activate the CS. As originally developed, the test is time-consuming, cumbersome, and has limited sensitivity for DENV diagnosis. Here, we developed and characterized a novel multiplex anti-DENV complement-fixing assay based on the Luminex platform to quantitate serum antibodies against all four serotypes (DENV1-4) that activate the CS based on their ability to fix the complement component 1q (C1q). The assay demonstrated good reproducibility and showed equivalent performance to a DENV microneutralization assay that has been used to determine DENV serostatus. In non-human primates, antibodies produced in response to primary DENV1-4 infection induced C1q fixation on homologous and heterologous serotypes. Inter-serotype cross-reactivity was associated with homology of the envelope protein. Interestingly, the antibodies produced following vaccination against Zika virus fixed C1q on DENV. The anti-DENV complement fixing antibody assay represents an alternative approach to determine the quality of functional antibodies produced following DENV natural infection or vaccination and a biomarker for dengue serostatus, while providing insights about immunological cross-reactivity among different Flaviviruses.     

Heuristic and probabilistic wind power availability estimation procedures: Improved tools for technology and site selection

The paper describes two investigative procedures to estimate wind power from measured wind velocities. Wind velocity data are manipulated to visualize the site potential by investigating the probable wind power availability and its capacity to meet a targeted demand. The first procedure is an availability procedure that looks at the wind characteristics and its probable energy capturing profile. This profile of wind enables the probable maximum operating wind velocity profile for a selected wind turbine design to be predicted. The structured procedures allow for a consequent adjustment, sorting and grouping of the measured wind velocity data taken at different time intervals and hub heights. The second procedure is the adequacy procedure that investigates the probable degree of availability and the application consequences. Both procedures are programmed using MathCAD symbolic mathematical software. The math tool is used to generate a visual interpolation of the data as well as numerical results from extensive data sets that exceed the capacity of conventional spreadsheet tools. Two sites located in Southern Ontario, Canada are investigated using the procedures. Successful implementation of the procedures supports informed decision making where a hill site is shown to have much higher wind potential than that measured at the local airport. The process is suitable for a wide spectrum of users who are considering the energy potential for either a grid-tied or off-grid wind energy system.     

Pressed booster compositions prepared by coating RDX using polymer dispersions

Abstract

The viability of preparing booster compositions from RDX and commercially available aqueous polyurethane, acrylic and ethylene-vinyl acetate dispersions has been assessed. These dispersions were coagulated in hot aqueous slurries of RDX by electrolyte addition and the use of thermal coagulation aids. When polymer coating of the RDX crystals occurred the precipitated polymer particles were deposited across the surfaces of the crystals. These coatings were often porous; however when softer polymers were used, coalescence occurred and more uniform coatings were obtained. Compositions containing these softer polymers were less sensitive to initiation by shock and impact. The flow properties of these compositions were usually improved by applying an additional coating of zinc stearate. The impact sensitiveness, shock sensitivity and cookoff behaviour of a number of candidate booster compositions have been assessed and suitable compositions have been identified.