A new methodology for the identification of ball bond degradation during high-temperature aging tests on devices in standard plastic packages

We describe a new methodology for the “in situ” identification of wire-bond degradation at early stages during high-temperature aging tests on devices with standard plastic packages. This methodology is based on the measurement of the changes in wire bond resistance, which is deduced from the I(V) characteristics of the ESD protection diodes on each contact pad of the circuit. In a first stage, the measurement procedure is described, with emphasis on the initial temperature calibration. This procedure allows for an “in situ” measurement sequence, where the packages stay in the aging chamber, at elevated temperature, during the electrical tests on the pad connections performed at different aging durations. By following accurately the package temperature, using a thermocouple, it is possible to correct for slight changes and thus get a reliable I–V measurement for each interconnection. In the second stage, the aging test results are described, showing the evolution of each individual interconnection. We were able to identify the onset of wire-bond degradation through the progressive increase of their resistance. To allow for better determination of the degradation process, once an increase in wire bond resistance was detected, complete I(V) curves were recorded at the pin(s) of interest. For each pin of a TQFP64 package, the tests were performed at least twice a day, with increased density when initial failure is detected (one complete measurement every 3 h). This strategy allowed for the detection of different behaviors on the wire bonds: good ball bonds (i.e. ball bonds with no change in their resistance), ball bond with intermittent opens (these ball bonds are in the process of degradation, and thermo-mechanical stresses induced in the resin by very small temperature changes are sufficient to open or close the circuits) and completely destroyed ball bonds, for which the resistance stays in an “high” level. This approach to wire-bond degradation in plastic packages is very powerful in terms of the number of interconnections which can be followed “in real time” and especially has the advantage, over other classical approaches, that the devices under test stay operational, contrary to what occurs with other types of destructive testing. These electrical test results are compared with metallographic investigations performed after a series of mechanical tests on the ball bonds (wire pull/ball shear tests) on a set of identical devices which undergone exactly the same High Temperature Storage (HTS) aging for 2000 h at 165 °C.     

High pass filter with above IC integrated SrTiO3 high K MIM capacitors

This paper describes realization and characterization of SrTiO₃ (STO) high K MIM capacitors above BiCMOS integrated circuit (IC). These capacitances are connected to IC and are used as coupling capacitors in order to realize a high pass filter. Surface capacitance achieved is 10 nF/mm² with capacitance value of 1.2 nF. The process for STO MIM fabrication does not exceed 400 °C, which is compatible with interconnections. Typical K and dielectric losses values obtained are, respectively 110% and 2%. Yield obtained reaches 83% for capacitors. A functional high pass filter using these STO capacitors was realized in this study. It exhibits a cut-off frequency at 6.5 kHz and a constant gain at higher frequencies of −1.3 dB.     

Comparison of low frequency noise and high frequency performances of double and simple polysilicon Bi-CMOS BJT

The issue of this paper concerns 0.35 μm Bi-CMOS double polysilicon bipolar transistors and 0.5 μm Bi-CMOS simple polysilicon bipolar transistors. Low-frequency noise measurements are performed. Noise spectral densities are analysed versus bias and geometry. From these noise measurements, base and emitter series resistances are extracted. A comparison of both technologies is done. Though double polysilicon transistors have a more complex structure than the simple polysilicon ones, they exhibit similar or even better performances. Indeed, DC characteristics and noise levels are equivalent for both technologies. Double polysilicon transistors exhibit a reduction of the base resistance and a significant improvement of the transition frequency f_T is obtained.     

A Behavioral Model of MEMS Convective Accelerometers for the Evaluation of Design and Calibration Strategies at System Level

This paper presents a behavioral model that can be used to improve the manufacturability of systems based on MEMS convective sensors. This model permits to handle faults related to process scattering, taking into account not only the electrical and lateral geometrical parameters but also the influence of the cavity depth. Moreover correlations between conductive and convective phenomena are included. The model is validated with respect to FEM simulations and a very good agreement is obtained between the behavioral model and FEM results. The proposed model can then be used in system-level simulations, for instance to evaluate the impact of process scattering on the performances of the sensing part and/or to investigate different design and calibration strategies with respect to the system robustness.     

Maximum Likelihood-Based Direction-of-Arrival Estimator for Discrete Sources

This paper addresses the problem of direction-of-arrival (DOA) parameter estimation in array processing when the signals are inherently discrete, which is the case mainly in the digital communication context. Based on the particular structure of the signal space in the data model, a maximum likelihood-based approach is introduced. The strategy consists in transforming the parameter estimation problem into a decision task. It is shown through numerical simulations that the proposed solution closely follows the performance limit given by the Cramér–Rao bound. Some important features of the technique are as follows: (i) it is capable of handling any number of sources, provided that the number of sensors is greater than or equal to two and the number of snapshots is sufficiently greater than the cardinality of the signal space; (ii) the estimation quality is not affected by the angle and phase separation; and (iii) it offers the possibility to deal with uncalibrated arrays.     

Self-organizing technique for improving coverage in connected mobile objects networks

Despite the multiple benefits offered today by connected mobile objects networks (CMONs), some constraints continue to limit their development and to degrade their applications and services’ performance. Given their limited energy, some or many objects may stop functioning which leads to the deterioration of network functionalities such as monitoring, detection and transfer of data. It is in this context that our work is situated, namely the improvement of applications performance and the quality of service (QoS) within CMONs, by exploiting some communication environment parameters and geometry techniques. We propose a new technique called self-organization area coverage (SOAC) for CMONs which aims to ensure maximum coverage in the network while optimizing the exploited resources. SOAC has been evaluated and compared not only to the network without improvement but to two other solutions proposed in the literature. The obtained results show a clear improvement in terms of network coverage and several QoS parameters.     

Adaptive scheduling mechanism for IPTV over WiMAX IEEE 802.16j networks

A WiMAX technology is a very promising Broadband Wireless Access technology that is able to transmit different service types. This latter can have different constraints such as traffic rate, maximum latency, and tolerated jitter. The IEEE 802.16 Medium Access Control specifies five types of QoS classes: UGS, rtPS, ertPS, nrtPS, and BE. However, the IEEE 802.16 standard does not specify the scheduling algorithm to be used. Operators have the choice among many existing scheduling techniques. Also, they can propose their own scheduling algorithms. In this paper, we propose a scheduling strategy (Adaptive Weighted Round Robin, AWRR) for various Internet Protocol Television (IPTV) services traffic over 802.16j networks. Our scheme adapts dynamically the scheduler operation to according queue load and quality of service constraints. In particular, the proposed mechanism gives more priority to high definition television and standard definition television traffic by using two schedulers. The proposed scheduling algorithm has been simulated using the QualNet network simulator. The experimental results show that our scheduler schemes AWRR have a better performance than the traditional scheduling techniques for rtPS traffic, which allows ensuring QoS requirements for IPTV application. Copyright © 2012 John Wiley & Sons, Ltd.     

Performance Analysis of Covariance Matrix Estimates in Impulsive Noise

This paper deals with covariance matrix estimates in impulsive noise environments. Physical models based on compound noise modeling [spherically invariant random vectors (SIRV), compound Gaussian processes] allow to correctly describe reality (e.g., range power variations or clutter transitions areas in radar problems). However, these models depend on several unknown parameters (covariance matrix, statistical distribution of the texture, disturbance parameters) that have to be estimated. Based on these noise models, this paper presents a complete analysis of the main covariance matrix estimates used in the literature. Four estimates are studied: the well-known sample covariance matrix M_SCM and a normalized version M_N, the fixed-point (FP) estimate M_FP, and a theoretical benchmark M_TFP. Among these estimates, the only one of practical interest in impulsive noise is the FP. The three others, which could be used in a Gaussian context, are, in this paper, only of academic interest, i.e., for comparison with the FP. A statistical study of these estimates is performed through bias analysis, consistency, and asymptotic distribution. This study allows to compare the performance of the estimates and to establish simple relationships between them. Finally, theoretical results are emphasized by several simulations corresponding to real situations.     

Vanadium Doping Enhanced Electrochemical Performance of Molybdenum Oxide in Lithium‐Ion Batteries

Molybdenum trioxide (MoO₃) suffers from poor conductivity, a low rate capability, and unsatisfactory cycling stability in lithium‐ion batteries. The aliovalent ion doping may present an effective way to improve the electrochemical performances of MoO₃. Here, it is shown, by first‐principle calculations, that doping MoO₃ with V by 12.5% can modulate significantly electronic structure and provide a small diffusion barrier for enhancing the electrochemical performance of MoO₃. The ultralong Mo_0.88V_0.12O_2.94 nanostructures, which retain the h‐MoO₃ structure and present an exceptionally high conductivity and fast ionic diffusion due to the substitution of V, facilitating lithiation/delithiation behavior, and induce a fine nanosized structure with a reduced volume change are prepared. As a result, the stress and strain are alleviated during the Li‐ion intercalation/deintercalation processes, improving the cycling stability and rate capability. Such a large improvement in the electrochemical properties can be ascribed to the stabilizing effect of V, the small migration energy barrier, and short diffusion path, which arise from the introduction of V into MoO₃. The unique engineering strategy and facile synthesis route open up a new avenue in modifying and developing other species of electrode materials.     

Using I2P (Invisible Internet Protocol) Encrypted Virtual Tunnels for a Secure and Anonymous Communication in VANets: I2P Vehicular Protocol (IVP)

Wireless Personal Communications - The Invisible Internet Project (I2P) as a secure protocol uses robust mechanisms and strong algorithms to reinforce the security and the anonymity of the...