Experimental studies on the instabilities of viscous fingering in a Hele-Shaw cell

When air is injected into silicone oil contained in a horizontal Hele-Shaw cell, a single air bubble forms and grows showing various interesting phenomena. In this study the effects of the bubble front velocity, air injection velocity at a nozzle, fluid properties and cell depth on the stability of the growing bubble were investigated experimentally. By using the modified capillary number involving the aspect ratio, we obtained the onset conditions of the unstable bubble. Also, the bubble width was analyzed both quantitatively and qualitatively. Before the bubble experiences splitting, the bubble front velocity is almost proportional to the air injection velocity. Therefore the latter velocity may be used in a practical sense.     

CLEAVAGE AUTOMATED: A new combinatorial chemistry tool

Liquid handling systems are in common use throughout the research chemistry industry, for a variety of fluid dispensing applications. However, few manual or automatic systems have been specifically designed for dosing highly corrosive acid/solvent mixes. Even fewer can withstand 60% Trifluoroacetic acid mixes - a standard mixture for cleavage of compound from polystyrene beads. A design is presented of such an automated dosing system. The requirements are to reduce human exposure to chemicals, remove potential for repetitive strain injury, and increase reaction plate throughput. Material choice, the use of process valves, equipment protection, and a novel plate detection system are discussed. Modifications resulting from the prototype test are discussed, along with additional improvements to the system and further research.     

Balanced operation of a GaInAs/GaInAsP multiple-quantum-wellintegrated heterodyne receiver

The balanced operation of a multiple-quantum-well balanced heterodyne receiver photonic integrated circuit (PIC) is described. Using only SMA-connected 50 Ω commercial electronics, a free-space beam sensitivity of -42.3 dBm at 108 Mb/s and -39.7 dBm at 200 Mb/s for NRZ FSK (frequency-shift keying) reception has been achieved. This represents a 14 dB improvement over any previous heterodyne receiver PIC sensitivity. In addition to providing the multichannel benefits of heterodyne reception, this is also the highest sensitivity yet reported for any OEIC (optoelectronic integrated circuit) receiver     

Antioxidant activities from the aerial parts of Platycodon grandiflorum

In order to obtain basic data necessary for the utilisation of aerial parts from Platycodon grandiflorum as a functional substance in Korea, the antioxidant activities of solvent fractions from the ethanol extract of P. grandiflorum aerial parts were examined. The butanol fraction from P. grandiflorum showed the most potent antioxidant activities in each assay, showing 91.31% in the DPPH radical scavenging method, 99.62% in the ABTS radical scavenging method, 7.84% in the reducing power method, and 1.29% in the FRAP method at a concentration of 10 mg/ml. The DPPH, ABTS, reducing power, and FRAP assay indicated that the butanol fraction of aerial parts of P. grandiflorum was the most potent radical-scavengers and reducing agents compared to the other two extracts. Therefore, our study verified that the butanol fraction has strong antioxidant activities which are correlated with its high level of phenolics, particularly luteolin-7-O-glucoside and apigenin-7-O-glucoside. This extract of P. grandiflorum aerial parts can be utilised as an effective and safe source of functional food materials such as natural antioxidants.     

Development of automatic variable preload device for spindle bearing by using centrifugal force

Machine tool spindles of late require high stiffness and fast rotation characteristics all at once for high-speed, high-efficient processing, as well as for a wide range of use rotation. As such, many studies are being carried out on automatic variable preload control methods that apply a preload to a spindle rolling bearing as an alternative to the existing fixed position preload and constant pressure preload methods. This paper introduces a newly structured automatic variable preload device that can automatically adjust the preload applied to spindles employing a rolling bearing. It proposes an automatic variable preload device with a completely new composition comprising of a main bearing to which the preload is applied, an auxiliary bearing that conveys the force and a centrifugal element that converts the centrifugal force into a force in the axial direction, and a constant pressure preload spring that applies the initial preload to the main bearing. Other changes in the centrifugal force are also presented. The proposed composition was validated through a contact nonlinear analysis, and the design data necessary to create a prototype were obtained. A prototype for the automatic variable preload device using centrifugal force was then created and tested to confirm that the preload device of the proposed structure runs properly and smoothly.     

A portable monitor for fetal heart rate and uterine contraction

The authors describe a low-power lightweight device for long-term ambulatory monitoring of high-risk pregnancies. The portable instrument was developed to monitor fetal heart rate (FHR) and uterine contraction (UC) continuously. It can record the abnormal FHR and UC, and it alerts pregnant women when to go to the hospital to see a physician. The abnormal FHR and UC recorded by the monitor can be analyzed by the associated system, which provides valuable data for the physician as an aid to diagnosis and treatment. The monitor is miniaturized for ambulatory monitoring and is powered by a commercial alkaline 9 V battery     

A new 4H-SiC normally off lateral channel vertical JFET with extremely low power losses: source inserted double-gate structure with a supplementary highly doped region

A novel silicon carbide (SiC) normally off lateral channel vertical junction field-effect transistor (LC-VJFET), namely a source-inserted double-gate structure with a supplementary highly doped region (SHDR), was proposed for achieving extremely low power losses in high-power switching applications. The proposed architecture was based on the combination of an additional source electrode inserted between two adjacent surface gate electrodes and a unique SHDR in the vertical channel region. Two-dimensional numerical simulations for the static and resistive switching characteristics were performed to analyze and optimize the SiC LC-VJFET structures for this purpose. Based on the simulation results, the excellent performance of the proposed structure was compared with optimized conventional structures with regard to total power losses. Finally, the proposed structure showed about a 20% reduction in on-state loss (P/sub on/) compared to the conventional structures, due to the effective suppression of the JFET effect. Furthermore, the switching loss (P/sub sw/) of the proposed structure was found to be much lower than the results of the conventional structures, about a 75% /spl sim/ 95% reduction, by significantly reducing both input capacitance (C/sub iss/) and reverse transfer capacitance (C/sub rss/) of the device.     

Monitoring struturants of fat blends with ultrasound based in‐line rheometry (ultrasonic velocity profiling with pressure difference)

Ultrasonic velocity profiling with pressure difference (UVP‐PD) was demonstrated to be a successful, non‐invasive, in‐line measurement system for instantaneous velocity and rheological flow profiling of complex, opaque fat blends. Model systems of 25% Akomic, 75% rapeseed oil; and 25% Akomic, 74% rapeseed oil and 1% Grindsted^® Crystalliser 110 were compared under real process conditions with UVP‐PD. Results indicated that the sample containing the crystalliser had twice the viscosity of the control. These in‐line results are in agreement with previous off‐line results, and offer the chance to probe the mechanics of fat blend physics under real, dynamic conditions.