Kinetics of the decomposition of total aliphatic waxes in olive oil during deodorization

Changes in the content of aliphatic waxes during industrial deodorization and/or physical refining of bleached olive oil were studied in an experimental discontinuous pilot plant of 250 kg deodorizer using nitrogen as stripping gas in place of steam. The kinetic constants for the decomposition of waxes during the deodorization process were determined. The reaction orders studied are zero (or can be considered zero) within the working interval. The values of rate constants, activation energy, frequency factor, increment of activation Gibbs free energy, activation enthalpy, and activation entropy are established.     

Methodology to resolve the transport equation with the discrete ordinates code TORT into the IPEN/MB-01 reactor

Resolution of the steady-state Neutron Transport Equation in a nuclear pool reactor is usually achieved by means of two different numerical methods: Monte Carlo (stochastic) and Discrete Ordinates (deterministic). The Discrete Ordinates method solves the Neutron Transport Equation for a set of selected directions, obtaining a set of directional equations and solutions for each equation which are the angular flux. In order to deal with the energy dependence, an energy multi-group approximation is commonly performed, obtaining a set of equations depending on the number of energy groups. In addition, spatial discretization is also required and the problem is solved by sweeping the geometry mesh. However, special cross-sections are required due to the energy and directional discretization, thus a methodology based on NJOY99 code capabilities has been used. Finally, in order to demonstrate the capability of this method, the 3D discrete ordinates code TORT has been applied to resolve the IPEN/MB-01 reactor.     

Enantiospecific synthesis of (R)-1,7-dioxaspiro [5.5]undecane [major component of olive fruit fly (Dacus Oleae) sex pheromone] from d-Fructose

The synthesis of the title compound13 has been carried out through the preparation of its precursor, (3R,4R,5S,6R)-3,4,5-trihydroxy-1,7-dioxaspiro[5.5]undecane (6), obtained fromd-fructose using Wittig's methodology, reduction, and spiroketalation. Compound6 was transformed into13 by a Barton deoxygenation at C-5 followed by a Corey dideoxygenation at C-3,4 of the appropriately protected derivatives.Enantiospecific synthesis of spiroacetals. Part II. For Part I, see Izquierdo and Plaza (1990).     

Defect structure and chemical diffusion in nickel sulfide β-Ni3S2

The chemical composition, defect structure, and diffusion in nickel sulfide -Ni₃S₂ have been investigated in H₂S-H₂ mixtures containing between 1 and 65% H₂S between 560 and 700°C. Gravimetric, density, and X-ray studies were carried out. In the thermodynamically stable compound the ratio of Ni/S varied between 1.3 and 1.75. The X-ray examination showed a step change in the lattice parameter at the Ni/S ratio 1.4. A linear dependence of the density values (between 5.5 and 6.2 g/cm³) on the composition was observed. On the basis of the chemical composition and density measurements the number of nickel and sulfur atoms in 1 cm³ were determined. It has been shown that the Ni₃S₂ phase is defected in both anion and cation sublattices and that its chemical formula may be described as follows: Ni_3±yS_2x, where y 2x. It has been found that in the mixture containing 10% H₂S the process of defect formation is determined by their diffusion in the sulfide. The temperature dependence of the diffusion coefficient is described by the equation D = 13.15 exp(-30,000/RT) cm²/sec. No dependence of D on the sulfur partial pressure was observed, but this may be due to the relatively large uncertainties in the measurement of the diffusion coefficients.     

Influence of Reinforcement Content and Matrix Composition on the Oxidation Resistance of Aluminum-Matrix Composites (A3xx.x/SiCp)

A study was made on the influence of the SiCp proportion and the matrix concentration of four composites (A360/SiC/10p, A360/SiC/20p, A380/SiC/10p, A380/SiC/20p) on their oxidation behavior. Gravimetric tests were used in a kinetics study of the corrosion process at different temperatures (350, 400, 450, and 500°C). The influence of corrosion on mechanical properties was evaluated by hardness measurements. The nature of corrosion products and the influence of the microstructure on the morphology and growth of the oxidation layer were analyzed by SEM and low-angle XRD. The extent of the damage due to oxidation for Al/SiCp composites increases with the SiCp concentration due to the increase of nucleation sites. One of these nucleation sites is in the interface region between the matrix and the particles. Oxidation was influenced more by the percentage of alloy elements in the matrix than by the proportion of SiCp reinforcement. The presence of Cu and Ni in the matrix favors the oxidation process through the formation of different intermetallic compounds.     

Photoacoustic technique for simultaneous measurements of thermal effusivity and absorptivity of pigments in liquid solution

A photoacoustic (PA) methodology, in the transmission configuration, for simultaneous measurements of thermal effusivity and molar absorption coefficient (absorptivity) for pigments in liquid solution is introduced. The analytical treatment involves a self-normalization procedure for the PA signal, as a function of the modulation frequency, for a strong absorbing material in the thermally thin regime, when the light travels across the sample under study. Two fitted parameters are obtained from the analysis of the self-normalized PA amplitude and phase, one of them proportional to the sample's optical absorption coefficient and from which, taking it for a series of samples at different concentrations, the pigment's absorptivity in liquid solution can be measured, the other one yields the sample's thermal effusivity. Methylene blue's absorptivity in distilled water was measured with this methodology at 658 nm, finding good agreement with the corresponding one reported in the literature.     

Distributed Latency-Energy Minimization and interference avoidance in TDMA Wireless Sensor Networks

This paper presents Latency-Energy Minimization Medium Access (LEMMA), a new TDMA-based MAC protocol for Wireless Sensor Networks (WSNs), specially suited to extend the lifetime of networks supporting alarm-driven, delay-sensitive applications characterized by convergecast traffic patterns and sporadic traffic generation. Its cascading time-slot assignment scheme conciliates low end-to-end latency with a low duty-cycle, while supporting multi-sink WSN topologies. Unlike most of the current solutions, LEMMA’s time-slot allocation protocol makes decisions based on the interference actually experienced by the nodes, instead of following the simple but potentially ineffective n-hop approach. Simulation results are presented to demonstrate the ineffectiveness of the n-hop time-slot allocation in comparison with LEMMA, as well as to evaluate the performance of LEMMA against L-MAC, T-MAC and Low Power Listening. The results show that under the target scenario conditions, LEMMA presents lower interference between assigned time-slots and lower end-to-end latency, while matching its best contender in terms of energy-efficiency.     

On a novel interpretation of PVC antiplasticization based on some local chain conformations

Summary The transition of a poly(vinyl chloride) after either nucleophilic substitution to various extents or plasticization with distinct amounts of diocytl phthalate has been measured by Dynamical Mechanical Thermal Analysis. Both sets of experiments are shown to result in similar loss of transition. The results are argued in the light of prior work on the substitution mechanism determining role of the mmr chain segments at the end of isotactic sequences. They strongly suggest the mmr structures to interact specifically with plasticizer thereby becoming stiffer (antiplasticization).