Thermoelectric Effect Spectroscopy and Photoluminescence of High-Resistivity CdTe:In

Thermoelectric effect spectroscopy and photoluminescence techniques were used to study the defect levels in samples from three crystals of CdTe:In grown by the vertical gradient freeze method. The main goal of the investigation was to study defects, which strongly trap charge carriers or act as recombination centers in order to eliminate them from the technological process. The main difference among detecting and non-detecting samples was the absence of electron traps with a very high capture cross-section and energy 0.6 eV to 0.7 eV, which act as lifetime killers even at low concentrations. Recently published ab initio calculations show a complex of Te antisite and Cd vacancy within this energy range.     

Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime

Flexible organic solar cells and modules based on P3ht:PCBM bulk-heterojunctions were fabricated and their lifetime was investigated under laboratory and outdoor conditions. In the laboratory cells were exposed to 1 sun illumination at 65 °C in order to accelerate the degradation. The outdoor behavior of modules was investigated at the Konarka rooftop testing setup in Lowell, MA (USA). We show that these flexible polymer solar cells have a good light stability, passing 1000 h under accelerated light soaking conditions in the laboratory, and that flexible modules survived over 1 year of outdoor exposure without performance losses.     

Channel addition-removal response in all-optical gain-clamped lumped Raman fiber amplifier

Application of all-optical gain-clamped (AOGC) lumped Raman fiber amplifier (RFA) for protection of surviving channels in multiwavelength networks is investigated experimentally and theoretically. Channel addition-removal was simulated by transmitting signals of two lasers through a counterdirectionally pumped RFA consisting of 16 km of dispersion compensating fiber. Light of one of the lasers was square-wave modulated at 500 Hz; power fluctuations of the other laser caused by cross-gain modulation of the RFA were monitored at the output of the amplifier with a digital oscilloscope. An all-optical feedback loop was implemented in the form of a ring laser. Theoretical analysis of the AOGC lumped RFA is based on numerical solution of coupled propagation equations for forward and backward-propagating pumps, signals, and spectral components of amplified spontaneous emission powers.     

0.18μm铜金属双重镶嵌工艺中空间成像套刻精度分析

由于空间成像套刻(Overlay)技术的预算随集成电路(IC)设计规范的紧缩而吃紧,因此,Overlay测量技术准确度的重要意义也随之提高。通过对后开发(AfterDevelopDI)阶段和后蚀刻(AfterEtchFI)阶段的Overlay测量结果进行比较,研究了0.18μm设计规范下的铜金属双重镶嵌工艺过程中的Overlay准确度。在确保对同一个晶圆进行后开发(DI)阶段和后蚀刻(FI)阶段测试的条件下,我们对成品晶圆的5个工艺层进行了比较。此外,还利用CD-SEM(线宽-扫描电子显微镜)测量了某个工艺层(PolyGate)上的芯片内Overlay,并与采用分割线方法的光学Overlay测量结果进行了比较。发现对芯片内overlay的校准存在着严重的局限性,即在应用CD-SEM时缺乏合适的结构进行Overlay测量。我们还将继续为大家提供定量的比较结果,同时也会向大家推荐组合的CD-SEM测量结构,使其能够被应用到今后的光刻设计中。     

Applying Petri Nets to Modeling of Many-Core Processor Self-Testing when Tests are Performed Randomly

Today’s many-core processors are manufactured in inherently unreliable technologies. Massively defective technologies used for production of many-core processors are the direct consequence of the feature size shrinkage in today’s CMOS (complementary metal-oxide-semiconductor) technology. Due to these reliability problems, fault-tolerance of many-core processors becomes one of the major challenges. To reduce the probability of failures of many-core processors various fault tolerance techniques can be applied. The most preferable and promising techniques are the ones that can be easily implemented and have minimal cost while providing high level of processor fault tolerance. One of the promising techniques for detection of faulty cores, and consequently, for performing the first step in providing many-core processor fault tolerance is mutual testing among processor cores. Mutual testing can be performed either in a random manner or according to a deterministic scheduling policy. In the paper we deal with random execution of mutual tests. Effectiveness of such testing can be evaluated through its modeling. In the paper, we have shown how Stochastic Petri Nets can be used for this purpose and have obtained some results that can be useful for developing and implementation of testing procedure in many-core processors.     

Transient thermo-reflectance measurements of the thermal conductivity and interface resistance of metallized natural and isotopically-pure silicon

The transient thermoreflectance method has been used to measure the thermal conductivity of natural silicon and isotopically-pure silicon-28 layers that are epitaxially grown on natural silicon substrates. The measurements were performed at room temperature for both a low level (10¹⁶) and a higher level (2×10¹⁹) of Boron doping of the epitaxial layers. The results indicate a gain of approximately 55% in the thermal conductivity of Si²⁸ as compared to that of natural Si, at both low and higher levels of doping, and a loss of approximately 19% for both types of silicon due to the higher level of doping.     

用LED寻找故障的电缆测试仪

本例描述了一个简单的电缆测试仪,它能形象地显示出一根16线电缆束(用于超声辅助驻车系统)的通断问题。一家承包商小批量地生产该线束,因此不适合采用自动化测试仪。为简单起见,用测试信号驱动几只LED,形象化地表示出通断情况。图1中的电路产生一个从0至15的二进制数(0000至1111)。可     

Regularization techniques in realistic Laplacian computation

This paper explores regularization options for the ill-posed spline coefficient equations in the realistic Laplacian computation. We investigate the use of the Tikhonov regularization, truncated singular value decomposition, and the so-called lambda-correction with the regularization parameter chosen by the L-curve, generalized cross-validation, quasi-optimality, and the discrepancy principle criteria. The provided range of regularization techniques is much wider than in the previous works. The improvement of the realistic Laplacian is investigated by simulations on the three-shell spherical head model. The conclusion is that the best performance is provided by the combination of the Tikhonov regularization and the generalized cross-validation criterion-a combination that has never been suggested for this task before.