A Synthetic MUC1 Glycopeptide Bearing βGalNAc‐Thr as a Tn Antigen Isomer Induces the Production of Antibodies against Tumor Cells

This study presents the synthesis of the novel protected O‐glycosylated amino acid derivatives 1 and 2 , containing βGalNAc‐SerOBn and βGalNAc‐ThrOBn units, respectively, as mimetics of the natural Tn antigen (αGalNAc‐Ser/Thr), along with the solid‐phase assembly of the glycopeptides NHAcSer‐Ala‐Pro‐Asp‐Thr[αGalNAc]‐Arg‐Pro‐Ala‐Pro‐Gly‐BSA ( 3 ‐BSA) and NHAcSer‐Ala‐Pro‐Asp‐Thr[βGalNAc]‐Arg‐Pro‐Ala‐Pro‐Gly‐BSA ( 4 ‐BSA), bearing αGalNAc‐Thr or βGalNAc‐Thr units, respectively, as mimetics of MUC1 tumor mucin glycoproteins. According to ELISA tests, immunizations of mice with βGalNAc‐glycopeptide 4 ‐BSA induced higher sera titers (1:320 000) than immunizations with αGalNAc‐glycopeptide 3 ‐BSA (1:40 000). Likewise, flow cytometry assays showed higher capacity of the obtained anti‐glycopeptide 4 ‐BSA antibodies to recognize MCF‐7 tumor cells. Cross‐recognition between immunopurified anti‐βGalNAc antibodies and αGalNAc‐glycopeptide and vice versa was also verified. Lastly, molecular dynamics simulations and surface plasmon resonance (SPR) showed that βGalNAc‐glycopeptide 4 can interact with a model antitumor monoclonal antibody (SM3). Taken together, these data highlight the improved immunogenicity of the unnatural glycopeptide 4 ‐BSA, bearing βGalNAc‐Thr as Tn antigen isomer.     

Development of phase morphology in immiscible poly(styrene‐co‐acrylonitrile)/poly(butylene terephthalate) nanoblends: Mechanical properties and effect of the compatibilizer

Nanoblends were obtained from poly(styrene‐co‐acrylonitrile) (SAN) as a matrix, and poly(butylene terephthalate) (PBT) was used as a nanodispersed phase. Compatibilized SAN/PBT blends were prepared by reactive extrusion, and the PBT concentrations ranged between 3 and 30 wt %. Nanoblends were obtained for up to 10 wt % PBT concentrations in the presence of the compatibilizer. With 20 and 30 wt % PBT, the extruded material presented a droplet dispersed phase. The same blends were subjected to an injection‐molding process, which provided a cocontinuous phase morphology. The influence of the concentration of the dispersed phase and the type of morphology on the mechanical behavior of tensile test, flexural test, impact test, and deflection temperature of the blends was analyzed. The results show an important reduction in the particle size of the dispersed phase, which was due to the presence of the compatibilizer. Furthermore, the type of morphology and an excess of compatibilizer exerted a stronger influence on the mechanical properties than the particle size of the dispersed phase. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45030.     

Production,nutrient cycling and soil compaction to grazing of grass companion cropping with corn and soybean

Agricultural management systems are needed to simultaneously enhance production, promote plant diversity, improve nutrient cycling and reduce soil compaction. We investigated the effects of intercropped forage grass on production of corn (Zea mays L.) harvested for silage at 0.20 and 0.45 m height in the summer, as well as on production of subsequent forage, soybean [Glycine max (L.) Merr.] harvested for silage, nutrient cycling and soil responses on a Typic Haplorthox in Botucatu, São Paulo State, Brazil. Palisade grass cv. BRS Piatã [Urochloa brizantha cv. BRS Piatã] was the introduced companion crop with corn (Years 1 and 2), while signal grass [Urochloa decumbens cv. Basilisk] was the residual weedy species in comparison. Guineagrass cv. Aruãna [Megathyrsus maximus cv. Aruãna] was the introduced companion crop with soybean (Year 3), with only a residual effect of crop systems from the previous two years. After the corn silage harvest, pasture was grazed by lambs in winter/spring using a semi-feedlot system. When cut at 0.45 m compared with 0.20 m height, corn intercropped with palisade grass had greater leaf nutrient concentration, improved agronomic characteristics, forage mass of pasture for grazing by lambs, greater surface mulch produced, and greater quantity of N, P and K returned to soil. Greater soil organic matter, P, K and Mg concentration, and base saturation in the surface soil depth and lower soil penetration resistance at all depths occurred at 0.45 m than at 0.20 m corn silage cutting height intercropped with palisade grass. Analyzing the system as a whole, harvesting corn silage crop with palisade grass intercrop at 0.45 m height was the most viable option in this integrated crop-livestock system.     

Antibody phage display libraries: contributions to oncology

Since the advent of phage display technology, dating back to 1985, antibody libraries displayed on filamentous phage surfaces have been used to identify specific binders for many different purposes, including the recognition of tumors. Phage display represents a high-throughput technique for screening billions of random fusion antibodies against virtually any target on the surface or inside cancer cells, or even soluble markers found in patient serum. Many phage display derived binders targeting important tumor markers have been identified. Selection directed to tumoral cells' surfaces lead to the identification of unknown tumoral markers. Also the improvement of methods that require smaller amounts of cells has opened the possibility to use this approach on patient samples. Robust techniques combining an antibody library displayed on the phage surface and protein microarray allowed the identification of auto antibodies recognized by patient sera. Many Ab molecules directly or indirectly targeting angiogenesis have been identified, and one of them, ramucirumab, has been tested in 27 phase I-III clinical trials in a broad array of cancers. Examples of such antibodies will be discussed here with emphasis on those used as probes for molecular imaging and other clinical trials.     

Development and Validation of a Method for the Determination of Fatty Acid Methyl Ester Contents in Tung Biodiesel and Blends

The aim of this study was to develop and validate a method for the analysis of fatty acid methyl ester (FAMEs) content in tung biodiesel and blends with soybean biodiesel. The limits of detection (LOD) and quantification (LOQ), linearity, robustness, accuracy and precision were evaluated by using gas chromatography with mass spectrometry detection and impact electron ionization. The analytical curves showed correlation coefficients values higher than 0.99. The LOD and LOQ were 0.78 and 2.5 mg L⁻¹ for all FAMEs, respectively. The values of accuracy were between 86 and 117%, with relative standard deviation lower than 8%. The method was applied to tung biodiesel and tung and soybean biodiesel blends in the following proportions: 15:85, 20:80, 25:75 (%v/v). All of them showed good performance. Since the method was also applied to soybean biodiesel, the efficiency of the method for the analysis of both pure tung biodiesel and blends with different raw materials was confirmed and the robustness of the method was evidenced.     

PBAT/organoclay composite films: preparation and properties

Environmental problems caused by the increased waste associated with short-term use of plastic materials, particularly by the food packaging industry, prompted the search for biodegradable alternatives. This contribution studied one of these alternatives, poly(butylene adipate-co-terephthalate)—PBAT, a polymer that is fully biodegradable in common landfills, compounded with a small amount of Cloisite 20A organoclay. Materials were mixed in a laboratory internal mixer and films prepared in a chill roll extruder. Results show that the presence of organoclay does not increase degradation of the polymer matrix during processing, nor affects its crystallization characteristics. However, organoclay addition significantly diminished oxygen and carbon dioxide permeability of the films, making them a very interesting alternative for the food packaging industry.     

The treatment of sulfate-rich wastewater using an anaerobic sequencing batch biofilm pilot-scale reactor

This paper presents the results from 92 cycles of an anaerobic sequencing batch biofilm reactor containing biomass immobilized on inert support (mineral coal) applied for the treatment of an industrial wastewater containing high sulfate concentration. The pilot-scale reactor, with a total volume of 1.2 m³, was operated at sulfate loading rates ranging from 0.15 to 1.90 kgSO₄²⁻/cycle (48 h — cycle) corresponding to sulfate concentrations of 0.25 to 3.0 gSO₄²⁻ l^− 1. Domestic sewage and ethanol were utilized as electron donors for sulfate reduction. Influent sulfate concentrations were increased in order to evaluate the minimum COD/sulfate ratio at which high reactor performance could be maintained. The mean sulfate removal efficiency remained between the range of 88 to 92% at several sulfate concentrations. Temporal profiles along the 48 h cycles were carried out under stable operation at sulfate concentrations of 1.0, 2.0 and 3.0 gSO₄²⁻ l^− 1. Sulfate removal reached 99% for cycle times of 15, 25, and 30 h, and the effluents sulfate concentrations were lower than 8 mgSO₄²⁻ l^− 1. The results demonstrate the potential applicability of the anaerobic configuration for the biological treatment of sulfate-rich wastewaters.     

Ultrafine grinding of sugar cane bagasse ash for application as pozzolanic admixture in concrete

Sugar cane bagasse ash, a byproduct of sugar and alcohol production, is a potential pozzolanic material. However, its effective application in mortar and concrete requires first the controlled use of grinding and classification processes to allow it to achieve the fineness and homogeneity that are required to meet industry standards. The present paper investigates the role of mill type and grinding circuit configuration in grinding in laboratory- and pilot plant-scale on the particle size, specific surface area and pozzolanic activity of the produced ashes. It was observed that, although different size distributions were produced by the different mills and milling configurations, the pozzolanic activity of the ground ash was directly correlated to its fineness, characterized by its 80% passing size or Blaine specific surface area. From a low pozzolanic activity of less than 50% of the as-received ash, values above 100% could be reached after prolonged grinding times. Electric power requirements to reach the minimum pozzolanic activity were estimated to be in the order of 42 kWh/t in an industrial ball mill. Incorporation of an ultrafinely-ground ash in a high-performance concrete in partial replacement of Portland cement (10, 15 and 20% by mass) resulted in no measurable change in mechanical behavior, but improved rheology and resistance to penetration of chloride ions.     

The Co-Au interface in bimetallic nanoparticles: a high resolution STEM study

We report the formation of Au/Co nanoparticles and their characterization by aberration (Cs) corrected scanning transmission electron microscopy (STEM). The nanoparticles were synthesized by inert gas condensation, forming initially core-shell and bimetallic crystals. However, after thermal treatment at normal atmospheric conditions, the Co nanoparticles changed their morphology into a fine layer forming a perfect interface with the gold. The ordering of the zone rich in Co presents a fcc arrangement matching the gold lattice. The atomic analysis on the interface and the comparison of the STEM images with numerical simulations corroborated the atomic substitution of gold by cobalt.