A biomorphic digital image sensor

An arbitrated address-event imager has been designed and fabricated in a 0.6-/spl mu/m CMOS process. The imager is composed of 80 /spl times/ 60 pixels of 32 /spl times/ 30 /spl mu/m. The value of the light intensity collected by each photosensitive element is inversely proportional to the pixel's interspike time interval. The readout of each spike is initiated by the individual pixel; therefore, the available output bandwidth is allocated according to pixel output demand. This encoding of light intensities favors brighter pixels, equalizes the number of integrated photons across light intensity, and minimizes power consumption. Tests conducted on the imager showed a large output dynamic range of 180 dB (under bright local illumination) for an individual pixel. The array, on the other hand, produced a dynamic range of 120 dB (under uniform bright illumination and when no lower bound was placed on the update rate per pixel). The dynamic range is 48.9 dB value at 30-pixel updates/s. Power consumption is 3.4 mW in uniform indoor light and a mean event rate of 200 kHz, which updates each pixel 41.6 times per second. The imager is capable of updating each pixel 8.3K times per second (under bright local illumination).     

A novel discrete control strategy for independent stabilization of parallel three-phase boost converters by combining space-vector modulation with variable-structure control

We propose a discrete nonlinear controller, developed in a synchronous frame, for a parallel three-phase boost converter consisting of two modules. The basic idea, however, can be extended to a system with N modules. Each of the closed-loop power-converter modules operates asynchronously without any communication with the other modules. The controller stabilizes the currents on the dq-axes and limits the flow of the pure-zero sequence current. It combines the space-vector modulation scheme with a variable-structure control, thereby keeping the switching frequency constant and achieving satisfactory dynamic performance.     

Influence of eccentricity on the frequency limitations of circular-pad via-holes

We study the influence of the technologically caused eccentricity of a circular-pad via-hole. We derive an eigenvalue equation using a rigorous method based on a linear transformation of the via-hole polar coordinates. The eigenvalue equation is used to compute the modal resonant frequencies and the modal fields of the eccentric via. It is shown that the via-hole misalignment shifts the modal frequencies and influences its frequency band. The proposed model is verified with published experimental data, and is also compared with results generated with the full-wave simulator Agilent Momentum-2002.     

Acquisition-time estimation for over 10 Gbit/s clock and data recovery ICs

A method to estimate the acquisition time for the clock and data recovery (CDR) IC using the linear phase-locked loop (PLL) technique is proposed. Estimations using the method follow the measured acquisition time for the PLL with any loop parameters, which makes it possible to design the CDR IC for various targets.     

Überlegungen zur Erweiterung des Klebstoffangebots im Holzleimbau

The procedure of testing adhesives for glulam production depends in Europe on the kind of resin. For example the testing of phenol-formaldehyde resins (PF-resins) includes the boiling test method, because the curing rate of these resins show a significant correlation between the strength after boiling and the resistance to moisture influence. On the other hand this test method is commonly insufficient for testing other resins. The results of investigations of glulam based on different kinds of resins show that there is a possibility to substitute the boiling test by a short-time accelerated aging method (KZB-Test) which will offer the same differentiation.     

Plastic deformation in a multifunctional Ti-Nb-Ta-Zr-O alloy

Mechanisms for plastic deformation in the newly developed Ti-24 at. pct (Ta + Nb + V)-(Zr,Hf)-O alloys (Gum Metal) were investigated in relation to their unique properties. Transmission electron microscopy revealed that the microstructure after deformation was characterized by highly distorted crystal images, which are accompanied by numerous “giant faults.” Such plastic behavior implies that a large amount of elastic stain energy was stored discretely and hierarchically during cold working. Calculated elastic constants of the Ti-X (Nb,Ta,Mo,V) binary systems predicted that Young’s modulus in 〈001〉 and shear moduli along some directions including slip systems in a bcc crystal were extraordinary small. The low modulus not only well explains the highly distorted microstructure observed in the cold-worked specimens, but also signifies that ideal shear strength of the developed alloys is a very small value, which is close to the practical strength required for plastic deformation in the alloy. This implies that the giant faults observed in the deformed specimen were formed without the aid of dislocation glide.     

Evaluation of hydrological processes in a mountainous small basin using a quinone biomarker.

An applicability of quinone biomarker to the analysis of hillslope runoff was investigated. At first, quinone profiles of three streams as well as a hillslope runoff in a forested headwater catchment were compared. The quinone composition of hillslope runoff differed from others. Moreover, there were remarkable differences in quinone profile of hillslope runoff under different rainfall conditions. Then, the behavior of quinone biomarker during the increase and decrease of hillslope runoff after a rainfall event was examined. The fractional changes in Q-9 (H2), Q-10 (H2), Q-11, MK-6 and MK-10 suggested the effect of interflow.     

Testing interconnections to static RAMs

A method for testing the interconnections of ordinary static RAMs with a processor that has a boundary-scan register and an IEEE 1149.1 test-access port is described. The method uses an enhanced boundary-scan-register design that manipulates the test-access-port controller states to meet the static RAM's timing constraints. The implementation is more economical than a boundary-scan register that strictly conforms to IEEE 1149.1. Test operation is more efficient, requiring a third of the number of scan operations. A test-pattern set and a method for detecting and diagnosing the interconnection faults on RAMs are also described. The test-pattern set can be enhanced as necessary to increase coverage and diagnosing ability and to handle any RAM configuration. The implementation of the proposed boundary-scan register is independent of the test algorithm used. It is believed that the methodology is extendable to RAMs that use an access protocol different from the one described, for example dynamic RAMs and synchronous RAMs     

Monolithic integration of a 5.3 GHz regenerative frequency divider using a standard bipolar technology

A monolithic microwave frequency divider IC with an operating range of 1.4?5.3 GHz was developed and fabricated in a standard bipolar technology. The circuit operates on the principle of `regenerative frequency division?. Compared to the most popular divider concepts based on a master-slave D-flip-flop, an almost twice as high input frequency can be divided, provided that the same technology is used. A further advantage is the low power consumption.