Ketone bodies,glucose and glutamine as lipogenic precursors in human diploid fibroblasts

Incorporation of [¹⁴C] from acetoacetate, D(-)- and L(+)-3-hydroxybutyrate, glucose, glutamine, acetate and palmitate in cellular lipids were studied in cultures in human diploid fibroblasts (HDF). The results showed that acetoacetate was 2–10 times more effective as a lipogenic precursor than was either D- or L-3-hydroxybutyrate. Its extent of incorporation into lipids was 2- to 8-fold more than the other precursors examined under conditions when the overall rates of nonsaponifiable and saponi-fiable lipogenesis as measured by³H₂O incorporation were essentially unchanged. Acetoacetate supported both saponifiable and nonsaponifiable lipid syntheses with half-saturation values (K_m app.) of 185 μM and 30 μM, respectively. Glucose stimulated acetoacetate incorporation into lipids whereas, conversely, acetoacetate inhibited [¹⁴C] glucose incorporation into lipids. The presence of low density lipoproteins (LDL) cholesterol (@40 μg cholesterol/mL) inhibited the incorporation of [¹⁴C] from acetoacetate 56% into nonsaponifiable lipids; the inhibition was consistently higher (75%) when [¹⁴C] glucose or glutamine were the precrusors. The loss of 3-hydroxy-3-methyl-glutaryl CoA (HMG CoA) reductase activity upon addition of LDL-cholesterol was greater than the suppression of [¹⁴C] incorporation from acetoacetate or glucose into nonsaponifiable lipids. In the presence of glucose, [¹⁴C] acetoacetate was incorporated into 3-βOH sterols (digitonin precipitable). 7.7±1.1 times more effectively than was [¹⁴C] glucose. The results suggest that HDF would be a suitable model to investigate the effects of various precrusors of HMG CoA on the rate of cholesterol biosynthesis.     

Thermodynamics of metal reactants for ammonia synthesis from steam,nitrogen and biomass at atmospheric pressure

Catalytic ammonia synthesis at approximately 30 MPa and 800 K consumes about 5% of the global annual natural gas production causing significant CO₂ emissions. A conceptual solar thermochemical reaction cycle to produce NH₃ at near atmospheric pressure without natural gas is explored here and compared to solar thermochemical steam/air reforming to provide H₂ used in the Haber‐Bosch process for NH₃ synthesis. Mapping of Gibbs free energy planes quantifies the tradeoff between the yield of N₂ reduction via metal nitridation, and NH₃ liberation via steam hydrolysis vs. the temperatures required for reactant recovery from undesirably stable metal oxides. Equilibrium composition simulations suggest that reactants combining an ionic nitride‐forming element (e.g., Mg or Ce) with a transition metal (e.g., MgCr₂O₄, MgFe₂O₄, or MgMoO₄) may enable the concept near 0.1 MPa (at maximum 64 mol % yield of Mg₃N₂ through nitridation of MgFe₂O₄ at 1,300 K, and 72 mol % of the nitrogen in Mg₃N₂ as NH₃ during hydrolysis at 500 K). © 2011 American Institute of Chemical Engineers AIChE J, 58: 3203–3213, 2012     

Charge Density Influences C1 Domain Ligand Affinity and Membrane Interactions

The C1 domain, which represents the recognition motif on protein kinase C for the lipophilic second messenger diacylglycerol and its ultrapotent analogues, the phorbol esters, has emerged as a promising therapeutic target for cancer and other indications. Potential target selectivity is markedly enhanced both because binding reflects ternary complex formation between the ligand, C1 domain, and phospholipid, and because binding drives membrane insertion of the C1 domain, permitting aspects of the C1 domain surface outside the binding site, per se, to influence binding energetics. Here, focusing on charged residues identified in atypical C1 domains which contribute to their loss of ligand binding activity, we showed that increasing charge along the rim of the binding cleft of the protein kinase C δ C1 b domain raises the requirement for anionic phospholipids. Correspondingly, it shifts the selectivity of C1 domain translocation to the plasma membrane, which is more negatively charged than internal membranes. This change in localization is most pronounced in the case of more hydrophilic ligands, which provide weaker membrane stabilization than do the more hydrophobic ligands and thus contributes an element to the structure–activity relations for C1 domain ligands. Coexpressing pairs of C1‐containing constructs with differing charges each expressing a distinct fluorescent tag provided a powerful tool to demonstrate the effect of increasing charge in the C1 domain.     

Manufacture and measurement of combinatorial libraries of dielectric ceramics: Part II. Dielectric measurements of Ba1−xSrxTiO3 libraries

Applying combinatorial methods to materials science offers the opportunity to accelerate the discovery of more efficient dielectric ceramics. High-throughput methods have the potential to investigate the effects of a wide range of dopants on the dielectric properties, and to optimise existing systems, encouraging the short innovation cycles that the communications technology industry requires. The London University Search Instrument (LUSI) is a fully automated, high-throughput combinatorial robot that has the potential capability to produce large numbers of sintered bulk ceramic samples with varying composition in 1 day, as combinatorial libraries on alumina substrates. Ba_1−xSr_xTiO₃ (BST) libraries were produced by LUSI as a proof-of-principle, with x = 0–1 in steps of 0.1, and fired to 1350 and 1400 °C for 1 h. Part I of this paper described the manufacture and physical characterisation of BST libraries, showing a regular change in composition with x across the libraries. In this second part, the dielectric properties of BST libraries produced by LUSI are assessed at frequencies between 100 Hz and 1 MHz, and at temperatures between 150 and 500 K. Local piezoelectric properties were also characterised by scanning probe microscope (SPM). All measurements showed evidence of a clear functional gradient varying with x across the library, with measured _r corresponding to expected values for BST.     

Relative fat oxidation is higher in children than adults

Background  

Prepubescent children may oxidize fatty acids more readily than adults. Therefore, dietary fat needs would be higher for children compared with adults. The dietary fat recommendations are higher for children 4 to 18 yrs (i.e., 25 to 35% of energy) compared with adults (i.e., 20 to 35% of energy). Despite this, many parents and children restrict dietary fat for health reasons.     

Synthesis of MIL-101@g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> nanocomposite for enhanced adsorption capacity towards CO<Subscript>2</Subscript>

MIL-101@g-C₃N₄ nanocomposite was prepared by solvothermal synthesis and used for CO₂ adsorption. The parent materials (MIL-101 and g-C₃N₄) and the MIL-101@g-C₃N₄ were characterized by X-ray diffraction, argon adsorption/desorption, Fourier transform infrared spectroscopy, thermal analysis (TG/DTA), transmission electronic microscopy, and Energy-dispersive X-ray spectroscopy. The results confirmed the formation of well-defined MIL-101@g-C₃N₄ with interesting surface area and pore volume. Furthermore, both MIL-101 and MIL-101@g-C₃N₄ were accomplished in carbon dioxide capture at different temperatures (280, 288, 273 and 298 K) at lower pressure. The adsorption isotherms show that the nanocomposite has a good CO₂ adsorption affinity compared to MIL-101. The best adsorption capacity is about 1.6 mmol g^?1 obtained for the nanocomposite material which is two times higher than that of MIL-101, indicating strong interactions between CO₂ and MIL-101@g-C₃N₄. This difference in efficacy is mainly due to the presence of the amine groups dispersed in the nanocomposite. Finally, we have developed a simple route for the preparation of an effective and new adsorbent for the removal of CO₂, which can be used as an excellent candidate for gas storage, catalysis, and adsorption.     

Heterogeneous distribution of chain mobility in nascent UHMWPE in the less entangled state

The structure of chain entanglements in the solid state is important for revealing the relationship of structure and properties of polyolefin. In this work, low-field solid-state ¹H NMR is used to study the chain dynamics of ultra-high molecular weight polyethylene (UHMWPE) in the solid state. It has been found that the relaxation distribution, analyzed by a multi-exponential inversion program, is an effective method to characterize the heterogeneous chain mobility. It is evidenced from the results that the UHMWPE in a less entangled state presents an obviously heterogeneous distribution of chain mobility in the non-crystalline phase, corresponding to its heterogeneous distribution of entangled points. In comparison, the commercial UHMWPE with a large number of entanglements shows a much more uniform mobility of the non-crystalline components. This heterogeneous distribution of chain mobility becomes even more critical after annealing the samples below the melting point, especially for the less entangled UHMWPE.     

Core‐Shell Nanoblends from Soy Protein/Polystyrene by Emulsion Polymerization

Novel soy protein/polystyrene nanoblends with core‐shell structures were successfully prepared by introducing nano‐sized PS into soy protein through emulsion polymerization. The nanoblends showed core‐shell structures, with the core being of PS and the shell of sodium dodecane sulfonate and soy protein polypeptides, when investigated by electron microscopy. Nanoblends containing high levels of PS (>30%) exhibited characteristic infrared spectrum bands, X‐ray diffraction peak, and glass transition, since PS microsphere aggregated to form independent PS domains. Mechanical strength and water resistance were effectively improved by introducing PS. An effective structure‐performance relationship was thereby established to describe the nanoblends.

     

3- Instead of 4-helix formation in a de novo designed protein in solution revealed by small-angle X-ray scattering

De novo design and chemical synthesis of proteins and their mimics are central approaches for understanding protein folding and accessing proteins with novel functions. We have previously described carbohydrates as templates for the assembly of artificial proteins, so-called carboproteins. Here, we describe the preparation and structural studies of three alpha-helical bundle carboproteins, which were assembled from three different carbohydrate templates and one amphiphilic hexadecapeptide sequence. This heptad repeat peptide sequence has been reported to lead to 4-alpha-helix formation. The low resolution solution structures of the three carboproteins were analyzed by means of small-angle X-ray scattering (SAXS) and synchrotron radiation circular dichroism (SRCD). The ab initio SAXS data analysis revealed that all three carboproteins adopted an unexpected 3+1-helix folding topology in solution, while the free peptide formed a 3-helix bundle. This finding is consistent with the calculated alpha-helicities based on the SRCD data, which are 72 and 68 % for two of the carboproteins. The choice of template did not affect the overall folding topology (that is for the 3+1 helix bundle) the template did have a noticeable impact on the solution structure. This was particularly evident when comparing 4-helix carboprotein monomers with the 2x2-helix carboprotein dimer as the latter adopted a more compact conformation. Furthermore, the clear conformational differences observed between the two 4-helix (3+1) carboproteins based on D-altropyranoside and D-galactopyranoside support the notion that folding is affected by the template, and subtle variations in template distance-geometry design may be exploited to control the solution fold. In addition, the SRCD data show that template assembly significantly increases thermostability.     

Exo-mechanism proximity-accelerated alkylations: investigations of linkers, electrophiles and surface mutations in engineered cyclophilin-cyclosporin systems

Investigations on the scope and utility of exo-mechanism proximity-accelerated reactions in engineered receptor-ligand systems are reported. We synthesized a series of electrophilic cyclosporin (CsA) derivatives by varying electrophiles and linker lengths, prepared a series of nucleophilic cysteine mutations on the surface of cyclophilin A (Cyp), and examined their reactivity and specificity in proximity-accelerated reactions. Acrylamide and epoxide electrophiles afforded useful reactivity and high specificity for alkylation of engineered receptors in Jurkat cell extracts. We found that remote cysteines (>17 A from the ligand) could be alkylated with useful rates under physiological conditions. The results from mutations of the receptor surface suggest that the dominant factors governing the rates of proximity-accelerated reactions are related to the local environment of the reactive group on the protein surface. This study defines several parameters affecting reactivity in exo-mechanism proximity-accelerated reactions and provides guidance for the design of experiments for biological investigations involving proximity-accelerated reactions.