Use of the 15N natural abundance technique to quantify biological nitrogen fixation by woody perennials

Biological nitrogen fixation (BNF) associated with trees and shrubs plays a major role in the functioning of many ecosystems, from natural woodlands to plantations and agroforestry systems, but it is surprisingly difficult to quantify the amounts of N₂ fixed. Some of the problems involved in measuring N₂ fixation by woody perennials include: (a) diversity in occurrence, and large plant-to-plant variation in growth and nodulation status of N₂-fixing species, especially in natural ecosystems; (b) long-term, perennial nature of growth and the seasonal or year-to-year changes in patterns of N assimilation; and (c) logistical limitations of working with mature trees which are generally impossible to harvest in their entirety. The methodology which holds most promise to quantify the contributions of N₂ fixation to trees is the so-called `¹⁵N natural abundance' technique which exploits naturally occurring differences in ¹⁵N composition between plant-available N sources in the soil and that of atmospheric N₂. In this review we discuss probable explanations for the origin of the small differences in ¹⁵N abundance found in different N pools in both natural and man-made ecosystems and utilise previously published information and unpublished data to examine the potential advantages and limitations inherent in the application of the technique to study N₂ fixation by woody perennials. Calculation of the proportion of the plant N derived from atmospheric N₂ (%Ndfa) using the natural abundance procedure requires that both the ¹⁵N natural abundance of the N derived from BNF and that derived from the soil by the target N₂-fixing species be determined. It is then assumed that the ¹⁵N abundance of the N₂-fixing species reflects the relative contributions of the N derived from these two sources. The ¹⁵N abundance of the N derived from BNF (B) can vary with micro-symbiont, plant species/provenance and growth stage, all of which create considerable difficulties for its precise evaluation. If the%Ndfa is large and the ¹⁵N abundance of the N acquired from other sources is not several ¹⁵N units higher or lower than B, then this can be a major source of error. Further difficulties can arise in determining the ¹⁵N abundance of the N derived from soil (and plant litter, etc.) by the target plant as it is usually impossible to predict which, if any, non-N₂-fixing reference species will obtain N from the same N sources in the same proportions with the same temporal and spatial patterns as the N₂-fixing perennial. The compromise solution is to evaluate the ¹⁵N abundance of a diverse range of neighbouring non-N₂-fixing plants and to compare these values with that of the N₂-fixing species and the estimate of B. Only then can it be determined whether the contribution of BNF to the target species can be quantified with any degree of confidence. This review of the literature suggests that while the natural abundance technique appears to provide quantitative measures of BNF in tree plantation and agroforestry systems, particular difficulties may arise which can often limit its application in natural ecosystems.     

Improvements in seismic event locations in a deep western U.S. coal mine using tomographic velocity models and an evolutionary search algorithm

Methods of improving seismic event locations were investigated as part of a research study aimed at reducing ground control safety hazards. Seismic event waveforms collected with a 23-station three-dimensional sensor array during longwall coal mining provide the data set used in the analyses. A spatially variable seismic velocity model is constructed using seismic event sources in a passive tomographic method. The resulting three-dimensional velocity model is used to relocate seismic event positions. An evolutionary optimization algorithm is implemented and used in both the velocity model development and in seeking improved event location solutions. Results obtained using the different velocity models are compared. The combination of the tomographic velocity model development and evolutionary search algorithm provides improvement to the event locations.     

Optimizing storage performance in public cloud platforms

Cloud computing is an elastic computing model where users can lease computing and storage resources on demand from a remote infrastructure.It is gaining popularity due to its low cost,high reliability,...     

ON THE CHEMICAL OSCILLATIONS IN DIFFERENTIAL REACTORS: A CASE STUDY OF AMMONIA OXIDATION ON PLATINUM

Trying to identify the mechanism(s) responsible for isothermal oscillatory behavior of heterogeneous catalytic reaction systems, many investigators have assumed low conversions with respect to the limiting reactant(s) so that the bulk phase concentrations of the reactants may be considered constant. In this study, it is shown that even in a differential catalytic CSTR, in which conversion of the reactants may be less than %, the changes of the gas phase concentrations of the reacting.species may play a key role in the overall dynamic behavior of a reaction system; for instance, they may drive the oscillations observed. The reduction of nitric oxide by ammonia on polycrystalline platinum is discussed in detail within this context. Several other oxidation reactions are also discussed     

Characterization of Pheromone Blend for Grapevine Moth, Lobesia botrana by Using Flight Track Recording

The behavioral responses of Lobesia botrana males to calling females, pheromone gland extracts, and synthetic sex pheromones were recorded in a wind tunnel. Gland extracts and synthetic pheromones were released from a pheromone evaporator. The numbers of males reaching the source and their flight tracks in response to calling females and pheromone gland extracts were compared to those of synthetic blends. Upwind flights to natural sex pheromone were straighter and faster than to a three-component blend of (E)-7,(Z)-9-dodecadienyl acetate (E7,Z9–12:Ac), (E)-7,(Z)-9-dodecadien-1-ol (E7,Z9–12:OH), and (Z)-9-docecenyl acetate (Z9–12:Ac) (100:20:5). The optimum ratio of E7,Z9–12:OH and Z9–12:Ac to E7,Z9–12:Ac was found to be 5% and 1%, respectively. An additional seven compounds identified in the sex pheromone gland were investigated for their biological activity. Two unsaturated acetates, i.e., (E)-9-dodecenyl acetate (E9–12:Ac) and 11-dodecenyl acetate (11–12:Ac), increased the number of males reaching the source as well as straightness, linear velocity, and decreased the track angle of upwind flight. Optimum response was obtained by releasing 10 pg/min E7,Z9–12:Ac in a mixture with 0.5 pg/min E7,Z9–12:OH, 0.1 pg/min Z9–12:Ac, 0.1 pg/min E9– 12:Ac and 1 pg/min 11-12–Ac. The saturated acetates previously identified in the female glands were biologically inactive.     

A model for studying LCAT reaction: In vitro cholesterol esterification in pig ovarian follicular fluid

Phosphatidylcholine acyltransferase (lecithin:cholesterol acyltransferase or LCAT; EC 2.3.1.43) activity was found to be present in pig ovarian follicular fluid (POFF), in addition to pig serum (PS). The cholesterol esterification rate in both POFF and PS is linear with incubation time up to 2 hr. The mean absolute rate of POFF-cholesterol esterification was 8.1±0.4 nmoles per ml per hr approximately one-fourth of that in PS. However, the fractional rate (percent of labeled cholesterol esterified per hr) of POFF-cholesterol esterification was similar to that observed in PS. There was little variation of absolute rate of cholesterol esterification in the fluid obtained from different sizes of follicles. Fatty acid or triacylglycerol did not participate in the reaction of cholesterol esterification in POFF. No appreciable change in enzymatic activity was found from storing POFF at 4 C for periods of time up to 24 hr or at −70 C up to 2 months, but activity was lost thereafter. On the other hand, PS showed a much longer period of stability (5 days at 4 C and 9 months at −70 C). A discrepancy between the fatty acid composition of cholesteryl esters formed by the LCAT reaction and the fatty acid composition at the C-2 position of phosphatidylcholine led us to propose a two-step mechanism for the LCAT reaction. It is concluded that the LCAT of POFF, as well as that of plasma, is specific for individual fatty acids rather than for the fatty acid composition of phosphatidylcholine. The fatty acid concentration of lysophosphatidylcholine decreased during prolonged incubation times (6 to 21 hr) suggesting that the increased lysophosphatidylcholine formed as a product of the LCAT reaction may be reused as substrate for the LCAT reaction or for hydrolysis by lysophosphatidylcholine hydrolase. Presented at the AOCS Meeting, New York, May 1977.     

Induced Defensive Response of Myrtle Oak to Foliar Insect Herbivory in Ambient and Elevated Co2

The rising level of atmospheric CO2 has stimulated several recent studies attempting to predict the effects of increased CO2 on ecological communities. However, most of these studies have been conducted in the benign conditions of the laboratory and in the absence of herbivores. In the current study, we utilized large octagonal chambers, which enclosed portions of an intact scrub-oak community to investigate the interactive effects of CO2 and insect herbivory on myrtle oak, Quercus myrtifolia. Specifically, we assessed the effects of ambient and elevated CO2 (2x current concentrations) on percent foliar nitrogen, C:N ratio, total relative foliar tannin content, and the presence of leaf damage caused by leaf mining and leaf chewing insects that feed on myrtle oak. Total foliar N declined and C:N ratios increased significantly in oaks in elevated CO2 chambers. The percentages of leaves damaged by either leafminers or leaf chewers tended to be lower in elevated compared to ambient chambers, but they co-occurred on leaves less than expected, regardless of CO2 treatment. Leaves that had been either mined or chewed exhibited a similar wounding or defensive response; they had an average of 25 and 21% higher protein binding ability, which is correlated with tannin concentration, compared to nondamaged control leaves, respectively. While the protein-binding ability (expressed as total percent tannin) of leaves from elevated CO2 was slightly higher than from leaves grown in ambient chambers, this difference was not significant.     

Photopolymer kinetics using light intensity gradients in high-throughput conversion analysis

Light intensity gradients and light exposure time gradients were combined to produce contours of constant dose on a sample substrate. These polymerized samples were subsequently analyzed using high-throughput Fourier transform infrared spectroscopy to measure conversion as a function of both gradients. Three (meth)acrylate monomers were analyzed over light doses ranging from 0 mJ/cm² to 920 mJ/cm², demonstrating that in thin films, higher light intensities at a constant light dose produce higher conversion due to a decreased oxygen inhibition time and larger thermal excursions. At a light dose of 75 mJ/cm², the conversion of 2-ethylhexyl acrylate increases from 40 ± 2% at a light intensity of 0.9 mW/cm² to 59 ± 3% at 7.2 mW/cm². The two acrylate monomers exhibited rapid photopolymerization up to a specific conversion, after which additional radiation dose produced only marginal increases in overall conversion. For hexanediol diacrylate, a light dose of 300 mJ/cm² was the minimum amount required to reach the maximum conversion over the entire range analyzed. For the dimethacrylate system, a similar effect was seen, with a reduced oxygen inhibition time and conversion above 70% showing a similar conversion at a constant light dose of 500 mJ/cm². In all three systems, dose contours were used to determine a range of light intensities at which a statistically similar conversion would occur for a specified light dose.     

Activation of Ni/A12O3 catalysts through modification of the Al2O3 support

The effect of alumina pretreatment on the performance of alumina supported nickel catalysts was demonstrated in gas phase hydrogenation of toluene to methylcyclohexane. The state of the alumina was changed from pure to pure phase through various heat treatments in air. The catalysts were prepared from vapor phase by saturating the accessible binding sites on the pretreated alumina with the nickel precursor. The highest number of active sites for hydrogenation was observed for catalysts prepared on alumina having an incomplete phase transition and a / alumina phase ratio between 0.5 and 10. Results from temperature programmed desorption (TPD) studies revealed that a maximum in weakly chemisorbed hydrogen as well as in total amount of desorbed hydrogen was found for the same catalysts. By hydrogen chemisorption studies the total hydrogen uptake was found to correlate with the observed hydrogenation maximum. It is suggested that both the chemical and physical properties of the alumina influence the activity. An optimal metal-support interaction and structural defects on the alumina due to the phase transition can explain the observed maximum in the number of active sites and in hydrogen uptake.