Bending and torsional fatigue of nylon 66 monofilaments

Using newly developed test equipment, the fatigue behavior of nylon 66 monofilaments was studied under two loading conditions, pure bending or simple torsion. For each mode, results are expressed in terms of the measured decay in stiffness with numbers of cycles over a range of maximum applied strain levels. Fatigue lifetimes are presented in S–N format where the log number of cycles of fatigue for a 40% decay in stiffness (N) is plotted as a function of applied strain (S). The failure mechanism for these fibers in each fatigue mode reflects the morphology of semicrystalline-oriented synthetic fibers. In torsion, many longitudinal cracks form around the perimeter of a fiber as the result of cleavage of the relatively weak interfibrillar bonds in nylon 66. In bending, cracks form within kink band boundaries and grow at an oblique angle to the fiber axis. © 1992 John Wiley & Sons, Inc.     

Some aspects of the role of coal thermoplasticity and coke structure in coal gasification. 2. The effects of pressure and heating rate on dilatometric parameters and optical anisotropy development

An examination of the influence of pressure and heating rate on the thermoplastic properties of a weakly coking coal and of coal with various pitch-like additives was carried out using a high pressure dilatometer. Pressure up to 4 MPa markedly increased the swelling properties and increased the plastic range by decreasing the softening temperature, but the effects of pressure were strongly influenced by rate of heating with high heating rates enhancing the effects. Additions of tar or pitch also enhanced swelling at low pressure. The solid carbonization residues from the dilatometer were examined by polarized light microscopy to determine the content and composition of optically anisotropic species. The anisotropic content was increased by increases in pressure and heating rate and pitch additives enhanced the anisotropic content, especially at low pressure, without affecting the composition of the anisotropy. No direct correlations exist between the dilatometric parameters and the optical anisotropy but their dependence on the conditions emphasizes that when considering high pressure gasification of coal, it is necessary to obtain data under appropriate conditions.     

Structural and magnetic characterization of norbornene-deuterated norbornene dicarboxylic acid diblock copolymers doped with iron oxide nanoparticles

A series of iron oxide doped norbornene (NOR)/deuterated norbornene dicarboxylic acid (NORCOOH) diblock copolymers were synthesized and characterized by X-ray photoelectron spectroscopy (XPS), small angle neutron scattering (SANS) and superconducting quantum interference device (SQUID) experiments. γ-Fe₂O₃ nanoparticles were synthesized within the microdomains of diblock copolymers with volume fractions of NOR/NORCOOH 0.64/0.36, 0.50/0.50 and 0.40/0.60. A spherical nanoparticle morphology was displayed in the polymer with 0.64/0.36 volume fraction. Polymers with 0.50/0.50 and 0.40/0.60 volume fractions exhibited interconnected metal oxide nanostructures. The observed changes in the shape and peak positions of the small-angle neutron scattering profiles of polymers after metal doping were related to the scattering from the metal oxide particles and to the possible deformed morphologies due to the strong interparticle interactions between metal particles, which may influence the polymer microphase separation. The combined scattering from both polymer domains and magnetic particles was depicted in SANS profiles of metal oxide doped polymers. γ-Fe₂O₃ containing block copolymers were superparamagnetic at room temperature. An increase in the blocking temperature (T_b) of interconnected nanoparticles was observed and was related to the interparticle interactions, which depends on the average distance (d) between particles and individual particle diameter (2R). The sample with volume fraction of 0.4/0.6 have the lowest d/(2R) ratio and exhibit the highest T_b at 115 K.     

Fourier transform infrared study of high-purity maceral types

A suite of density-differentiated macerals from several coals was analysed by Fourier transform infrared spectroscopy to obtain information on the nature and magnitude of the variations exhibited by the various maceral fractions. The most characteristic change between maceral groups was the variation in aliphatic hydrogen content, with exinite ? vitrinite ? inertinite. Since the separation technique (density gradient centrifugation) generally provided a number of fractions within a maceral group region, some of these were also analysed. In a series of density fractions from a low rank vitrinite, it was found that the aliphatic hydrogen content decreased as the density increased. The inertinites also exhibited a decrease in aliphatic hydrogen. The inertinite C—O bands had extinction coefficients different from those of vitrinites or exinites. The data suggest that quite profound variations in organic structure as determined by FT-i.r. spectroscopy can exist within a maceral group, so that for the most critical work on coals it is necessary to take this into account.