工艺参数对PP挤出发泡泡孔结构的影响

研究了螺杆转速、机头口模形状以及机头温度对挤出发泡聚丙烯(PP)泡孔结构的影响。结果表明：在挤出发泡过程中，一定配方、机头形状和温度下，螺杆转速存在最佳值；机头形状越有利于建立高压，制得的泡沫的泡孔越细密均匀且发泡倍率越高；机头口模温度在保证顺利挤出情况下．越低越有利于制得高发泡倍率的泡沫。     

异丁烯两段催化氧化制甲基丙烯酸催化剂研究 Ⅰ．异丁烯气相氧化制甲基丙烯醛多元复合氧化物催化剂的研究

本文报导用于异丁烯（叔丁醇）选择氧化制ＭＡＬ（甲基丙烯醛）的多元复合氧化物催化剂的研究结果。同共沉淀法制备的催化剂的活性主要决定于其化学组成，同时受到制备条件的影响。最佳催化剂的主要物相组成为ＰｂＯ３，Ｂｉ２ＭｏＯ３．３、ＮｉＭｏＯ４、Ｓｂ２Ｏ３及ａ－Ｆｅ２Ｏ３小颗粒。在３５５℃，１０００～２５００ｈ－１空速范围，叔丁醇：水：空气＝１：３．３：７（摩尔比）的条件下可获得异丁烯转化率达９６％，ＭＡＬ选择性达８９％的结果。     

Increased α-linolenic acid intake increases tissue α-linolenic acid content and apparent oxidation with little effect on tissue docosahexaenoic acid in the guinea pig

The essential fatty acids do not have identical roles in nutrition. Linoleic acid (LA) accumulates throughout the body of most mammals, whereas α-linolenic acid (ALA) is rarely found in tissue lipids to the same extent as LA. It has been argued that this is the result of metabolism of ALA to docosahexaenoic acid (DHA) or that ALA is rapidly β-oxidized to acetyl CoA and CO₂. In this study, we consider the effect of high and low ALA levels on the tissue distribution of ALA and other n-3 polyunsaturated fatty acids (PUFA) in all tissues. Guinea pigs were fed one of two defined diets for 3 wk from wearning with both diets containing 1.8% (by weight) of LA and either 1.7% ALA or 0.03% ALA. The high ALA diet was associated with significantly increased ALA levels in all tissues except the brain and significantly increased levels of long-chain n-3 PUFA in all tissues except intestines, brain, carcass, and skin. The long-chain n-3 PUFA content of the whole body was less than 5% of that of the ALA content in both diet groups, and the major long-chain n-3 PUFA (>66% of total) in the body was 22∶5n−3. The brain was the only tissue where the DHA content exceeded that of 22∶5n−3. On the low ALA diet, there appeared to be conservation of ALA based on a comparison of the ratio of LA to ALA in the tissues compared with that in the diet. On the high ALA diet there was a loss of ALA relative to LA in the tissues compared with the diet. These studies suggest that the low levels of tissue ALA in the guinea pig are likely the result of β-oxidation or excretion via the skin and fur rather than metabolism to DHA.     

Study of collective user behaviour in Twitter: a fuzzy approach

The study of collective user behaviours in social networking sites has become an increasing important topic in social media mining. Understanding such behaviours has its potential to extract actionable patterns that can be beneficial to develop effective marketing strategies, optimise user experiences and maximise website revenues. With the rapid development of micro-blogging, Twitter has become a richer source of intelligence that can be used to study collective user behaviour, due to its efficient and meaningful user-to-user interactions. However, the classical statistical methods have some drawbacks in bridging the gap between user-generated data and human analysts who mostly use linguistic terms to analyse data and model/summarise knowledge learned. To address this gap, this work proposes a new approach, which employs the mass assignment theory-based fuzzy association rules algorithm (MASS-FARM), for the first time, to extract useful interaction behaviour of Twitter users. The influential factors (including activity time, number of friends/followers and the number of tweets) are represented as fuzzy granules, and the associations amongst are studied by employing MASS-FARM. The collective user behaviours are analysed in the Reply category and the Non-Reply category, respectively. The applicability and usefulness of the proposed method are demonstrated via an empirical study on a collected Twitter data set. The derived results are also discussed and compared with existing works.     

可降解聚丙烯发泡塑料初探

开发可降解聚丙烯(PP)发泡制品具有广阔的发展前景。PP自身的化学结构特点使其具有比其它聚烯烃和PS更优异的降解性能。在PP中添加各种光降解剂,或引入光敏基团可以促进PP的光降解性;将其与天然高分子或各种可降解塑料混合也可以有效促进PP的生物降解;将降解和发泡的配方和工艺合理结合以获得光降解性、生物降解性或光 生物双降解的发泡PP制品是完全可能的。     

反相高效液相色谱法测定meso-四苯基卟啉钴的纯度

采用反相高效液相色谱法测定合成meso-四苯基卟啉钴的纯度;以甲醇乙腈二氯甲烷(体积比为55∶35∶10)为流动相,ShimpackCLCODS柱(150mm×6.0mmi.d,5μm)为分离柱,流速为1.5mL/min,检测波长420nm;meso四苯基卟啉钴的测定在1.0～10μg/mL时线性关系良好(相关系数r=0.9993),加标回收率为97.03%～101.42%,重复进样的相对标准偏差RSD为0.64%～2.92%(n=5)。方法的准确度高,精密度好,实际应用效果好。     

聚丙烯结构壁管专用料的开发

阐述了塑料结构壁管的基本情况和国内外现状．重点就扬子石油化工股份有限公司研究院研制的聚丙烯结构壁管专用料的情况进行了介绍。     

氧化铝上吸附平衡与动力学的分形特性

在实验测定氧化铝吸附氮气的平衡和动力学过程的基础上 ,由平衡数据得到分形维数 ,对动力学结果分别用欧氏几何和分形几何的动力学模型进行处理 ,比较两种方法得到的扩散系数之间的差别。结果表明 :粉状氧化铝的分形维数为 2 .12 ;采用分形动力学模型得到的扩散系数同欧氏几何扩散模型的结果不一样 ,扩散系数不随浓度的变化而改变 ;而欧氏几何扩散模型中的扩散系数随浓度变化发生改变 ,且变化符合Darken关系     

环氧树脂/蒙脱土纳米复合材料性能的研究

用一种新型的热稳定性较好的改性剂2，2’-二[4-(4-氨基苯氧基)苯基]-丙烷(BAPP)改性钠基蒙脱土，再与环氧树脂进行纳米复合制备了环氧树脂／蒙脱土纳米复合材料。讨论了蒙脱土用量对环氧树脂／蒙脱土纳米复合材料性能的影响，并对其结构和性能进行了表征和测试。结果表明：改性使蒙脱土层间距变大，制备出的环氧树脂／蒙脱土纳米复合材料剥离结构较好，环氧树脂／蒙脱土纳米复合材料的玻璃化转变温度和动态储能模量随改性蒙脱土用量的增加呈现较好的递增趋势。