Safety approach in the EU test blanket systems design

This paper reveals the safety strategy and approach developed and followed in the design of the two EU TBS describing its objectives, components and implementation. Addressing the safety in the early stage of the conceptual design of nuclear facilities is a well recognized international practice and industrial project-level requirement for the successful completion of the licensing process within expected project cost and schedule. The impact of the early development of the safety approach, its implementation and monitoring in the design of nuclear device like the TBS is not limited to the safety assessment and licensing activities only. Safety approach plays indispensible role in reducing the overall project risk. It infiltrates the entire design process through the unavoidable interfaces between the design features and its safety level. In reality the entire process of the TBS development, design, technological demonstration and implementation is affected by the project team safety culture.     

Comparison of various sol-gel derived metal oxide layers for inverted organic solar cells

Inverted bulk-heterojunction solar cells have recently captured high interest due to their environmental stability as well as compatibility to mass production. This has been enabled by the development of solution processable n-type semiconductors, mainly TiO₂ and ZnO. However, the device performance is strongly correlated to the electronic properties of the interfacial materials, and here specifically to their work function, surface states as well as conductivity and mobility. It is noteworthy to say that these properties are massively determined by the crystallinity and stoichiometry of the metal oxides. In this study, we investigated aluminum-doped zinc oxide (AZO) as charge selective extraction layer for inverted BHJ solar cells. Thin AZO films were characterized with respect to their structural, optical and electrical properties. The performance of organic solar cells with an AZO electron extraction layer (EEL) is compared to the performance of intrinsic ZnO or TiO_x EELs. We determined the transmittance, absorbance, conductivity and optical band gap of all these different metal oxides. Furthermore, we also built the correlations between doping level of AZO and device performance, and between annealing temperature of AZO and device performance.     

Buckling and collapse of cylinders with one end open and one end simply supported with varying axial restraint

This paper examines the buckling and collapse of cylindrical shells under axial load with one end radially and tangentially fixed, with varying axial fixity, and the other end free. The bifurcation loads are found for elastic cylinders, while collapse loads are found for both elastic and elastic-perfectly plastic cylinders. The varying axial restraint is applied in the form of linear springs. The eigenvalue buckling loads are calculated with conditions matching those of a classical analysis. Bifurcation loads are shown to be a function of the axial restraint; as the axial restraint is increased, the bifurcation load increases dramatically, until it reaches that of a semi-infinite, open ended cylinder. A non-dimensional form of the axial spring stiffness is proposed, and shown to be applicable across a range of geometries.The collapse load and imperfection sensitivity of cylinders with the boundary conditions examined here is also found to be a function of the axial restraint. Cylinders with low axial restraint are shown to be imperfection insensitive, with collapse loads above, or close to, the bifurcation load. As the amount of axial restraint increases, the collapse behaviour displays a degree of imperfection sensitivity associated with more usual boundary conditions.     

Milk and cheese fatty acid composition in sheep fed Mediterranean forages with reference to conjugated linoleic acid cis-9,trans-11

Two experiments were undertaken to evaluate the effect on milk and cheese fatty acid composition of feeding different fresh forages to dairy sheep both in winter (experiment 1, growing stage of the forages, early lactating ewes) and in spring (experiment 2, reproduction stage of the forages, midlactating ewes). Four forage species were compared: annual ryegrass (RY, Lolium rigidum Gaudin), sulla (SU, Hedysarum coronarium L.), burr medic (BM, Medicago polymorpha L.), and a daisy forb (CH, Chrysanthemum coronarium L.). The forages were cut twice daily and offered ad libitum to 4 replicate groups of Sarda dairy sheep (groups RY, SU, BM, and CH). The CH forage was particularly rich in linoleic acid in both periods, whereas BM and SU forages were rich in linolenic acid in winter and spring, respectively. Milk fatty acid composition was affected by the forage in both experiments. Milk conjugated linoleic acid and vaccenic acid contents were higher in CH and BM groups (winter) and CH group (spring) than in the other groups. No differences were observed when comparing fatty acid profile between milk, 1-d-old cheeses, and 60-d-old cheeses within experimental groups, suggesting that the fatty acid recovery rates during cheese making and ripening were not affected by the feeding regimens. After stepwise discriminant analyses of the pooled data, the milks and cheeses sourced in the different feeding regimens differed among them. Based on these results, we conclude that it is possible to manipulate the fatty acid profile of sheep dairy produce to maximize the content of beneficial fatty acids by the use of appropriate fresh forage-based regimens.     

Surrogate data analysis for assessing the significance of the coherence function

In cardiovascular variability analysis, the significance of the coupling between two time series is commonly assessed by setting a threshold level in the coherence function. While traditionally used statistical tests consider only the parameters of the adopted estimator, the required zero-coherence level may be affected by some features of the observed series. In this study, three procedures, based on the generation of surrogate series sharing given properties with the original but being structurally uncoupled, were considered: independent identically distributed (IID), Fourier transform (FT), and autoregressive (AR). IID surrogates maintained the distribution of the original series, while FT and AR surrogates preserved the power spectrum. The ability of the three methods to define the threshold for zero coherence was validated and compared by computer simulations reproducing typical cardiovascular interactions. While the IID threshold depended only on record length and design parameters of the coherence estimator, FT and AR thresholds were frequency-dependent with peaks corresponding to the local maxima of the estimated coherence. FT and AR surrogates were able to compensate spurious coherence peaks due to equal-frequency but independent oscillations in the two series. The benefit of frequency-dependent thresholds was evident for short series with narrow-band oscillations. Thus, surrogates preserving the power spectrum of the original series are recommended to avoid false coupling detections in the presence of oscillations occurring at nearby frequencies but produced by different mechanisms, as may frequently happen in cardiovascular and cardiorespiratory regulation.     

Survey of Salmonella contamination of non-United Kingdom-produced raw shell eggs on retail sale in the northwest of England and London, 2005 to 2006

This survey was prompted by a change in the epidemiology of Salmonella Enteritidis infections in England and Wales and elsewhere in Europe and, to our knowledge, is the first survey to provide information on Salmonella contamination of non-United Kingdom eggs on retail sale. Based on 10,464 non-United Kingdom eggs (1744 pooled samples of six eggs) purchased between March 2005 and July 2006, the total weighted prevalence estimate for all Salmonella detected in non-United Kingdom eggs was 3.3%. Of the eggs sampled, most were produced in Spain (66.3%), France (20.0%), or The Netherlands (7.4%). Salmonella was detected from 4.4 and 0.3% of eggs produced in Spain and France, respectively, with weighted prevalence estimates. Eight different Salmonella serotypes were recovered from non-United Kingdom eggs, of which Salmonella Enteritidis predominated, with an estimated prevalence of 2.6%. Salmonella Enteritidis was obtained only from Spanish eggs. Nine different phage types of Salmonella Enteritidis were identified, with phage type 1 found to be the predominant phage type. Most of the Salmonella Enteritidis isolates obtained from Spanish eggs in the survey were resistant to nalidixic acid with concomitant decreased susceptibility to ciprofloxacin (0.125 to 1.0 mg/liter) or ampicillin (8.0 mg/liter). Salmonella Enteritidis phage type 1 until now had not been detected in eggs examined as part of previous United Kingdom egg surveys but has been detected in eggs of Spanish origin examined during recent national outbreaks of Salmonella Enteritidis non-phage type 4 infections in England and Wales. Eggs are a commonly consumed food that may occasionally be contaminated with Salmonella. The rates of contamination may be linked to the origin of the eggs. Consumers and caterers need to be aware of this continuing hazard, adopt appropriate control measures, and follow advice provided by national food agencies in order to reduce the risk of infection.     

Microwave-assisted synthesis and characterization of flower shaped zinc oxide nanostructures

A microwave-assisted solution-phase approach has been applied for the synthesis of zinc oxide nanostructures. The synthesis procedure was carried out by using two reagents: hydrazine hydrate and ammonia. Flower shaped particles were obtained with hydrazine hydrate whereas mainly spherical agglomerated particles were observed with ammonia. The nanostructures were influenced by microwave irradiation time, reagent concentration and molar ratio of the precursors. High crystalline materials were found without the need of a post-synthesis treatment. The average crystalline size of ZnO nanostructures has been analyzed by X-ray Diffraction (XRD) pattern and estimated to be 18 nm. The presence of flower shaped zinc oxide with nanorods arranged has been confirmed from Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) micrographs. The samples were further analyzed by Fourier Transform InfraRed (FT-IR), Thermogravimetric Analysis (TGA) and photoluminescence spectroscopic techniques.