Modeling fluid flow in three-dimensional single crystal dendritic structures

Convection during directional solidification can cause defects such as freckles and misoriented grains. To gain a better understanding of conditions associated with the onset of convective instabilities, flow was investigated using three-dimensional (3D) computational fluid dynamics simulations in an experimentally obtained dendritic network. A serial-sectioned, 3D data set of directionally solidified nickel-base superalloy measuring 2.3 × 2.3 × 1.5 mm was used to determine the permeability for flow parallel and normal to the solidification direction as a function of solid fraction (f_S). Anisotropy of permeability varies significantly from 0.4 < f_S < 0.6. High flow velocity channels exhibit spacings commensurate with primary dendrite arms at the base of the mushy zone but rapidly increase by a factor of three to four towards dendrite tips. Permeability is strongly dependent on interfacial surface area, which reaches a maximum at f_S = 0.65. Results from the 3D simulation are also compared with empirical permeability models, and the microstructural origins of departures from these models are discussed.     

Tissue-type plasminogen activator variants with domain duplications and rearrangements

The interactions between tPA domains that are important forcatalysis are poorly understood. We have probed the functionof interdomain interactions by generating tPA variants in whichdomains are duplicated or rearranged. The proteins were expressedin a transient mammalian expression system and tested in vitrofor their ability to activate plasminogen, induce fibrinolysisand bind to a forming fibrin clot. Duplication of the heavychain domains of tPA produced enzymatically active tPA variants,many of which demonstrated similar in vitro amidolytic and fibrinolyticactivity and similar fibrin affinity to the parent molecule.Zymographic analysis of the domain duplication tPA variantsshowed one major active species for each variant. Selectionof the residues duplicated and the interdomain spacing werefound to be critical considerations in the design of tPA variantswith duplicated domains. We also rearranged the domains of tPAsuch that kringle 1 replaced the second kringle domain and viceversa. An analysis of these variants indicates that the firstkringle domain can confer fibrin affinity to a tPA variant andfunction in place of kringle 2. Therefore, in wild-type tPA,the functions of kringle 1 and kringle 2 must be dependent partiallyon their orientation within the heavy chain of the protein.The functional autonomy of the heavy and light chains of tPAis demonstrated by the activity of a tPA variant in which theorder of the heavy and light chains was reversed.     

Structure-function analysis of tissue-type plasminogen activator by linker-insertion, point and deletion mutagenesis

We undertook a structure–function analysis of human tissueplasminogen activator (tPA) using linker-scanning and deletionmutagenesis. Synthetic oligonucleotide linkers were introducedinto the tPA cDNA at pre-existing restriction enzyme sites.This generated a series of tPA variants which contained smallprimary sequence alterations consisting of point mutations,deletions or insertions. The majority of the linker-insertionvariants demonstrate a significant reduction in amidolytic andfibrinolytic activity in comparison to wild-type tPA. The exceptionsare the variants with linker-inserts placed at the BglII(115)and StyI(277) sites of the tPA cDNA (4SLEG5 and 57LEA58 respectively),which encode insertions at the boundaries of the finger domain.The variants with linker-inserts in the light chain (proteasedomain) of tPA are the lowest in enzymatic activity. Particularlysensitive to mutation are highly conserved amino acids. Heavychain deletion variants were constructed from point mutantsat the domain boundaries of tPA. Deletion of the kringle domainslowers the fibrinolytic activity to a greater extent than deletionof the finger or growth factor domains. We conclude that alterationsin any domain of the tPA molecule, and particularly in the highlyconserved residues within these domains, can affect fibrinolyticactivity.     

The dynamics of extraction processes: Part II. Comparison of dynamic testing methods and their application to an extraction process

A comparison of the theoretical and experimental difficulties and advantages of sinusoidal, pulse, and step testing procedures, as applied to a continuous stagewise extraction process, is made. An experimental extraction apparatus suitable for a variety of dynamic studies is described. For this apparatus step testing has been found to give results as reliable as those from pulse methods. The paper develops the theoretical background and describes experimental implementation of double pulse testing. The extraction column when used with the system water-acetic acid-methyl isobutyl ketone was found to behave linearly over the range of variables studied. The stages of the column were found to be “well-mixed”, and it was concluded that the column could be best represented by a lumped parameter model.     

Airborne Dust Capture and Induced Airflow of Various Spray Nozzle Designs

Water spray characteristics, including droplet size and velocity, airborne dust capture potential, and induced airflow quantity for various spray nozzle designs were evaluated to provide basic information for improving spray applications. Water droplet size and velocity characteristics were initially measured by a Phase Doppler Particle Analyzer (PDPA) for hollow cone, full cone, flat fan, and air atomized spray nozzles at similar operating parameters. Airflow inducement and dust capture experiments were also conducted under the same operating parameters to examine any salient features of the spray nozzle type, droplet characteristics, induced airflow, and airborne dust capture.

Test results indicate that there are trade offs between airflow inducement and dust capture efficiency. A spray nozzle with a wider discharge angle was observed to induce more airflow, but at reduced dust capture efficiencies. Increasing spray nozzle fluid pressure(s) generally reduced water droplet sizes with concurrent increases in droplet velocity, airflow inducement, and airborne dust capture. Placing a three-sided barrier around the spray nozzles normally reduced spray air induction and increased dust capture efficiency. A direct relationship between airborne dust capture efficiency and spray input power normalized per unit of airflow induced was observed. This information can be utilized to improve the performance of water sprays for reducing airborne dust levels.     

A comparison of posture and muscle activity during tablet computer, desktop computer and paper use by young children

Computers are now widely used by children. Tablet computers are becoming widely available and promoted for use by school children. The primary objective of this study was to compare the posture and muscle activity of children using a tablet computer to the posture and muscle activity of children using a desktop computer and paper technology. Eighteen children (mean age 5.6 years) performed a colouring-in task in tablet, desktop and paper conditions. 3-D posture and muscle activity around the neck and shoulder was assessed. Tablet computer use was similar to paper use, with less neutral spinal posture, more elevated scapular posture and greater upper trapezius and cervical erector spinae activity. This was offset by greater variability of posture and muscle activity. Tablet computer use clearly results in different musculoskeletal stresses than desktop computer use. Computer use guidelines need to be appropriate to traditional and emerging technologies. Tablet computers are being promoted for use by adults and children. However, the physical impact of using this type of technology is not known. The findings of this study provide the first tablet-specific evidence to inform guidelines on wise use of tablet computers by children.     

Optimizing the interaction of children with information and communication technologies

This paper outlines the major changes in the lives of children in industrially advanced countries associated with the increased interaction with information and communication technologies. The potential opportunities and threats to the cognitive, social, physical and visual development of children are reviewed to emphasize the importance of optimizing the interaction. The change in children's use of technology also poses opportunities and threats for ergonomics that should be noted if the profession is to continue being relevant and useful into this century. The paper ends with a pathway to the development and implementation of guidelines about child information and communication technology use for different groups of guideline users.