Characterization and transport of aerosols over the Bay of Bengal during the winter monsoon: a comparative study using in-situ and satellite measurements

Natural processes, such as dust storms and sea salt spray, and anthropogenic activities, such as the burning of fossil fuels and biomass, introduce aerosols into the atmosphere. Their concentration, geographic distribution and particle size promote significant climatic consequences. Aerosol transport processes, from landmasses to oceans, are scarcely understood because of inadequate in-situ observations. This study reports the results of spectral aerosol optical depth (AOD) measurements using a five-channel (380, 440, 500, 675 and 870 nm) handheld MICROTOPS Sun-photometer used during a sea-truth data collection campaign conducted in the central Bay of Bengal (BOB) during the northeastern monsoon period (10 November to 13 December 2007). For the entire cruise period, the mean values of the daily average of the AODs at 500 nm and 870 nm were 0.39 ± 0.065 and 0.22 ± 0.047, respectively, the mean value of the Angstrom exponent (α) was 1.23 ± 0.2 and the turbidity parameter (β) was 0.183 ± 0.044. A smaller α value together with a larger β value suggests the presence of an abundance of smaller aerosol particles near the coast. An air mass back-trajectory analysis was undertaken to identify the potential source regions of the aerosols. Analysis of the results demonstrated the effect of the aerosol transport and source regions on the spectral behaviour of the AODs. In-situ measured AOD (550 nm) and α (550 nm, 865 nm) values were further compared with Moderate Resolution Imaging Spectroradiometer (MODIS)-derived parameters. The in-situ and MODIS-derived AOD values were found to be in good agreement, with a coefficient of determination (R ²) of 0.78 and a standard error of 0.05, while the R ² for α was 0.68 with a standard error of 0.14.     

Effects of manufacturing tolerances on the electrical performance of suspended and inverted microstrip lines

Effects of manufacturing tolerances in the dimensions and parameters of suspended and inverted microstrip lines on the electrical performance of these lines have been studied through sensitivity analysis. The closed-form expressions recently given by Pramanick and Bhartia for the analysis of these lines have been used to derive the mathematical expressions for various sensitivities and the dependence of sensitivities on the aspect ratios and on the substrate dielectric constant has been depicted graphically. Generally speaking, the effects of tolerances are seen to be reflected much more sharply in the sensitivities of the characteristic impedance than in those of the effective dielectric constant. Many other useful inferences are also drawn from the sensitivity graphs. The conclusions are presented in tabular form, so as to be of direct help to the user.     

Evaluation of Thermocyclic Oxidation Behavior of HVOF-Sprayed NiCrFeSiB Coatings on Boiler Tube Steels

High velocity oxy-fuel (HVOF) spray process has grown into a well-accepted industrial technology for obtaining coatings resistant to significant surface degradation processes. In the present study, HVOF process was used to deposit Ni-based hardfacing NiCrFeSiB alloy powder on kinds of boiler tube steels designated as SA210 grade-A1, SA213-T11, and SA213-T22. The microstructures and several properties of the as-sprayed coatings have been investigated. Thermocyclic oxidation studies were performed in static air at 900 °C. NiCrFeSiB-coated steels showed slow oxidation kinetics and considerably lower weight gains than that of uncoated steels. The superior performance of NiCrFeSiB coatings can be attributed to continuous and protective thin oxide scale of amorphous SiO₂ and Cr₂O₃ formed on the surface of the oxidized coatings. The combined technique of x-ray diffraction, scanning electron microscopy, energy dispersive x-ray analysis, and electron probe microanalysis are used to characterize reaction products of the oxidized surfaces.     

Guest–host interaction in ferroelectric liquid crystal–nanoparticle composite system

The present paper deals with the characterization of a ferroelectric liquid crystal–nanoparticle (FLC–NP) composite system. The dielectric, electrical and polarization property of the FLC–NP composite system have been studied as a function of temperature and frequency. Ferroelectric Cu-doped ZnO (Cu–ZnO) nanoparticles have been added to the pure ferroelectric liquid crystal (FLC) Felix 17/100. The nanoparticles are bigger in size as compared to FLC molecules; therefore, they distort the existing geometry of FLC matrix and set up an antiparallel correlation with the dipole moments of the host FLC molecules. This antiparallel correlation of guest–host geometry reduces the net ferroelectricity of the composite system and modifies all the physical properties of the pure FLC. The change in properties has been analysed and explained in the light of guest–host interaction.     

Investigations on triple fluid vapour absorption refrigerator

This Paper deals with theoretical and experimental investigations on the triple fluid vapour absorption refrigerator (TFVAR) in relation to the gas circuit, thermo-siphon and inert gas charge pressure. The charges of the various fluids were estimated. Helium seems to be a better inert gas than hydrogen. A compact absorber design is proposed.     

Compatibility of ZrN and HfN with molten LiCl-KCl-NaCl-UCl3

The reaction kinetics of ZrN and HfN immersed in a quaternary salt of composition of 28.5% LiCl-36.3% KCl-29.4% NaCl-5.8% UCl₃ (in weight percent) were assessed. Coupons of ZrN and HfN were exposed to the quaternary salt at 525-900 °C for 4-485 h. The reaction kinetics of the salt-refractory interactions were assessed through physical and microstructural characterization including scanning electron microscopy, X-ray diffraction and mass spectrometry. The results indicated that ZrN and HfN lose weight under all conditions investigated. While multiple mechanisms were evident, it is proposed that dissolution and oxidation were the dominant reactions that influence the weight loss. For the overall reaction, negative apparent activation energy values of −46 and −28 kJ/mol were observed in ZrN and HfN, respectively. These seemingly anomalous activation energies were associated with the simultaneous occurrence of electrochemical dissolution and surface oxide formation.     

Thermal stability and elevated temperature mechanical properties of electroslag remelted Fe-16wt.%Al-(0.14–0.5)wt.%C intermetallic alloys

Addition of carbon in the range of 0,14–0.5 wt.% to the Fe₃Al-based intermetallic Fe-16wt.%Al (Fe-28at.%Al) alloy results in the formation of a thermally stable dispersion of Fe,AIC carbide phase. The volume fraction of these precipitates increases with increase in carbon content. Processing of these alloys through a combination of air induction melting and electroslag remelting leads to enhanced elevated temperature mechanical properties compared to those reported for the low (< 0.01 wt.%) carbon alloys with similar Al contents. Enhancement of up to 30% in elevated temperature yield strength was observed at the test temperatures (600, 700 and 800°C) used. The improvement in mechanical properties may be attributed to the presence of strengthening Fe₃AlC phase as well as the interstitial carbon present in the alloy matrix. The addition of carbon also leads to improved room temperature mechanical properties in contrast with other alloying additions (such as Mo, Ti and Si) used for enhancing elevated temperature properties of Fe₃Al-based intermetallic alloys. It is suggested that carbon may be an important alloying addition to these alloys.