Angular absorptance and thermal degradation analysis of TiB2/Ti(B,N)/SiON/SiO2 multilayer solar absorber coating

Multilayer solar selective absorber coatings have been developed in the last few decades. The thermal stability in terms of microstructure gives an insightful understanding of the optical properties of such coatings. In this context, we extensively utilized transmission electron microscopy (TEM) analysis to establish the thermal stability of TiB₂/Ti(B,N)/SiON/SiO₂ coating, under thermal cycling/continuous heating to 500°C in vacuum for 250 h. In particular, this work reports the variation in the solar absorptance of TiB₂/Ti(B,N)/SiON/SiO₂ coating with different angles of incidence of the solar radiation. Extensive analysis using the TEM technique reveals the presence of oxide interlayers that act as diffusion barrier layers to enhance the thermal stability of the coating. Computational simulation using SCOUT software validates the measured reflectance spectrum of the developed multilayer coating. The minor changes in absorptance and emissivity after heat treatment in vacuum at 500°C, together with high solar absorptance over a broad angular variation, establish the potential application of TiB₂/Ti(B,N)/SiON/SiO₂ as a selective coating in concentrated solar power systems.     

Preparation,structural, and characterizations of SnO2-coated TiNb2O7 anode materials for lithium-ion batteries

SnO₂-coated TiNb₂O₇ powders were synthesized via the solution coating method in the present research. The SnO₂ layers with a thickness of 3–5 nm were homogeneously coated on the surface of TiNb₂O₇ particles. TiNb₂O₇ coated with SnO₂ of 5 mol% with high Li⁺ diffusion coefficient delivered the discharge capacity of 319.5 mAh/g, which was 6.6% higher than that of the non-coated samples. The enhancement of capacity for the coated TiNb₂O₇ was owing to the low charge-transfer resistance of 17.5 Ω in contrary to the non-coated TiNb₂O₇ (27.8 Ω). SnO₂-coated TiNb₂O₇ possessed an improved capacity retention of 85.2% at 5 C after 100 cycles, superior to the non-coated TiNb₂O₇ (79.8%). On the other hand, the excessive amounts of SnO₂ coating led to the reduction in the capacity of the prepared samples. The excessive amounts of SnO₂ layers suppressed the Li⁺ diffusion and increased the charge-transfer resistance. The obtained results in this study indicated that coating of TiNb₂O₇ with appropriate amounts of SnO₂ significantly improved the electrochemical performance of TiNb₂O₇.     

Visible Light Photocatalysis on Magnetically Recyclable Fe3O4/Cu2O Nanostructures

Catalysis Letters - Magnetically recyclable visible light photocatalysts for the degradation of critical organic pollutants are an urgent industrial requirement. Nonetheless, one component...     

Bioprocess Scale-up for Acetohydroxamic Acid Production by Hyperactive Acyltransferase of Immobilized Rhodococcus Pyridinivorans

Catalysis Letters - In this study, Rhodococcus pyridinivorans cells containing hyperactive acyltransferase was immobilized on various macromolecules based-polymeric matrices and used to improve...     

Architectural View of Flexible Aliphatic –OH Group Coordinated Hemi-Directed Pb(II)-Salen Coordination Polymer: Synthesis,Crystal Structure,Spectroscopic Insights,Supramolecular Topographies,and DFT Perspective

Journal of Inorganic and Organometallic Polymers and Materials - We serendipitously designed one novel 1D hetero-binuclear Zn(II)-Pb(II) coordination polymer, namely...     

Development of spark plasma sintered conductive SiC–TiB2 composites for electrical discharge machining applications

Highly dense electrically conductive silicon carbide (SiC)–(0, 10, 20, and 30 vol%) titanium boride (TiB₂) composites with 10 vol% of Y₂O₃–AlN additives were fabricated at a relatively low temperature of 1800°C by spark plasma sintering in nitrogen atmosphere. Phase analysis of sintered composites reveals suppressed β→α phase transformation due to low sintering temperature, nitride additives, and nitrogen sintering atmosphere. With increase in TiB₂ content, hardness increased from 20.6 to 23.7 GPa and fracture toughness increased from 3.6 to 5.5 MPa m^1/2. The electrical conductivity increased to a remarkable 2.72 × 10³ (Ω cm)^–1 for SiC–30 vol% TiB₂ composites due to large amount of conductive reinforcement, additive composition, and sintering in nitrogen atmosphere. The successful electrical discharge machining illustrates potential of the sintered SiC–TiB₂ composites toward extending the application regime of conventional SiC-based ceramics.     

A Novel Approach to Model Threshold Voltage and Subthreshold Current of Graded-Doped Junctionless-Gate-All-Around (GD-JL-GAA) MOSFETs

Silicon - This present article interprets the analytical models of central channel potential, the threshold voltage, and subthreshold current for Graded-Doped Junctionless-Gate-All-Around...     

Dry Sliding Tribological Behavior of Brake Oil Conditioned Ceramic Matrix Composites Reinforced With Carbon Fabric

Silicon - Ceramic composites are extremely sensitive to the surrounding environment. Their tribological performance may degrade drastically if they are polluted by some external agent. The present...     

Effect of SiC on Mechanical and Microstructural Characteristics of Al Based Functionally Graded Material

Silicon - In this study, an attempt was made to enhance the mechanical and microstructural properties of aluminium (Al) based FGM with the influence of silicon carbide (SiC) elements. The five...     

Studies on Egg Shell and SiC Reinforced Hybrid Metal Matrix Composite for Tribological Applications

Silicon - The hybrid metal matrix composite is developed through stir casting process. In theAl7075 aluminium matrix material, two different combination of reinforcements are used to make hybrid...