Variable temperature in situ X-ray diffraction study of mechanically activated synthesis of calcium titanate, CaTiO3

The effect of mechanical activation on formation of calcium titanate (CaTiO₃) from calcined mixtures of CaCO₃ and TiO₂ was studied by monitoring the course of this solid-state reaction by variable temperature in situ X-ray diffraction (XRD) experiments, scanning electron microscopy (SEM) and dilatometry. Two equimolar mixtures of powdered CaCO₃ and TiO₂ were prepared: one was mechanically activated by grinding in a high energy vibro-mill. A total of 32 X-ray diffraction data sets for each sample, collected between 30 and 1100 °C, were analyzed by multiphase Rietveld refinement. Quantitative phase analysis and microstructure analysis obtained from X-ray diffraction are correlated to results of scanning electron microscopy and dilatometry. In the non-activated sample, small quantities of the reactants remain in the product until 1100 °C. In the activated sample, the reaction results in pure CaTiO₃ at 920 °C.     

Aging of the over-voltage protection elements caused by over-voltages

The aim of this work is examining the influence of the number of the activation––over-voltage pulses to the aging of over-voltage protection elements. Both non-linear (gas-filled surge arresters (GFSA), varistors, over-voltage diodes) and linear (capacitors––constituents of filters) over-voltage protection elements were tested. The instruments employed allow reliable measurements, 1000 consecutive activation were tested. The double-exponential current pulse (amplitude I₁^max=13 A, I₂^max=16 A, rise time T₁=8 μs, fall time T₂=20 μs) for non-linear elements and a double-exponential over-voltage pulse (rise time T₁=1.2 μs, fall time T₂=50 μs) of the amplitude U₁^max=320 V, U₂^max=480 V and U₃^max=640 V for capacitors were used. The experimental results show that the over-voltage diodes are the most reliable elements in view of characteristic modifications that are consequence of aging. However, it was observed that varistors, GFSA and capacitors undergo noticeable changes in characteristics.     

Removal of N-terminal peptides from β-lactoglobulin by proteolytic contaminants in a commercial phenol oxidase preparation

The use of enzymes may improve the functional properties of various food ingredients. The aim of this study was to examine the effects of proteolytic contaminants in phenol oxidases on β-lactoglobulin (BLG). In the presence of Trametes versicolor laccase and Agaricus bisporus tyrosinase, both variants of BLG (A and B) underwent removal of a peptide from the N-terminus. The truncated forms were more susceptible to digestion by pepsin. The truncation of BLG resulted from contaminating proteases and not due to the action of phenol oxidases. The removal of N-terminal peptides proceeded quickly, while the rest of the globular protein remained resistant to proteolysis for up to 3 h. In the case of the application of enzymes in food bioprocessing, it may be important to carefully monitor the effects of contaminating proteases in enzyme preparations used.     

Evaluation of a novel method of noise reduction using computer-simulated mammograms

A novel method of noise reduction has been tested for mammography using computer-simulated images for which the truth is known exactly. This method is based on comparing two images. The images are compared at different scales, using a cross-correlation function as a measure of similarity to define the image modifications in the wavelet domain. The computer-simulated images were calculated for noise-free primary radiation using a quasi-realistic voxel phantom. Two images corresponding to slightly different geometry were produced. Gaussian noise was added with certain properties to simulate quantum noise. The added noise could be reduced by >70% using the proposed method without any noticeable corruption of the structures. It is possible to save 50% dose in mammography by producing two images (each 25% of the dose for a standard mammogram). Additionally, a reduction of the anatomical noise and, therefore, better detection rates of breast cancer in mammography are possible.     

Probabilistically bounded soft sphere detection for MIMO-OFDM receivers: algorithm and system architecture

Iterative soft detection and channel decoding for MIMO OFDM downlink receivers is studied in this work. Proposed inner soft sphere detection employs a variable upper bound for number of candidates per transmit antenna and utilizes the breath-first candidate-search algorithm. Upper bounds are based on probability distribution of the number of candidates found inside the spherical region formed around the received symbolvector. Detection accuracy of unbounded breadth-first candidatesearch is preserved while significant reduction of the search latency and area cost is achieved. This probabilistically bounded candidate-search algorithm improves error-rate performance of non-probabilistically bounded soft sphere detection algorithms, while providing smaller detection latency with same hardware resources. Prototype architecture of soft sphere detector is synthesized on Xilinx FPGA and for an ASIC design. Using area-cost of a single soft sphere detector, a level of processing parallelism required to achieve targeted high data rates for future wireless systems (for example, 1 Gbps data rate) is determined.     

Structure and enhanced antimicrobial activity of mechanically activated nano TiO2

Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO₂ (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO₂ and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (E_g) and, consequently, to investigate changes in the E_g value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO₂-based materials with antimicrobial properties that could be used in numerous green technology applications.     

Transmittance Measurements in Non-alternating Magnetic Field as Reliable Method for Determining of Heating Properties of Phosphate and Phosphonate Coated Fe3O4 Magnetic Nanoparticles

Different phosphates and phosphonates have shown excellent coating ability toward magnetic nanoparticles, improving their stability and biocompatibility which enables their biomedical application. The magnetic hyperthermia efficiency of phosphates (IDP and IHP) and phosphonates (MDP and HEDP) coated Fe₃O₄ magnetic nanoparticles (MNPs) were evaluated in an alternating magnetic field. For a deeper understanding of hyperthermia, the behavior of investigated MNPs in the non-alternating magnetic field was monitored by measuring the transparency of the sample. To investigate their theranostic potential coated Fe₃O₄-MNPs were radiolabeled with radionuclide ¹⁷⁷Lu. Phosphate coated MNPs were radiolabeled in high radiolabeling yield (>?99%) while phosphonate coated MNPs reached maximum radiolabeling yield of 78%. Regardless lower radiolabeling yield both radiolabeled phosphonate MNPs may be further purified reaching radiochemical purity of more than 95%. In vitro stabile radiolabeled nanoparticles in saline and HSA were obtained. The high heating ability of phosphates and phosphonates coated MNPs as sine qua non for efficient in vivo hyperthermia treatment and satisfactory radiolabeling yield justifies their further research in order to develop new theranostic agents.

     

Distributed modifier-adaptation schemes for the real-time optimisation of uncertain interconnected systems

This paper proposes a set of distributed real-time optimisation schemes for the steady-state optimisation of parametrically and structurally uncertain systems that are composed of multiple interconnected subsystems. These schemes are derived in the framework of modifier adaptation and use uncertain system models of varying complexity. Consequently, each distributed modifier-adaptation scheme imposes different requirements on the available plant measurements, the communication network, and the control architecture. We prove that every scheme can converge to the plant optimum despite model uncertainty and compare the main features of each approach. Finally, we illustrate our findings via a numerical example.     

A hyperpower iterative method for computing the generalized Drazin inverse of Banach algebra element

A quadratically convergent Newton-type iterative scheme is proposed for approximating the generalized Drazin inverse \(b{^\mathrm d}\) of the Banach algebra element b. Further, its extension into the form of the hyperpower iterative method of arbitrary order \(p\ge 2\) is presented. Convergence criteria along with the estimation of error bounds in the computation of \(b{^\mathrm d}\) are discussed. Convergence results confirms the high order convergence rate of the proposed iterative scheme.