Considerations on ex-vessel corium behavior: Scenarios, MCCI and coolability

The aim of this editorial article is to provide some structuring of the subject addressed in this part of the issue, which, in the view of the present authors, has not that clearly been reached by the specific contributions. Ex-vessel corium behavior is a wide field. Therefore, classification of the goals of investigations within a safety philosophy is especially required to get not lost in detailed aspects. The overall goals here are the coolability and retention options under ex-vessel conditions. Based on scenario considerations generally addressing risks and options, general principles of cooling and retention devices are outlined. Since the concrete erosion by melt yields a major risk and has to be considered in the concepts and devices, and also since several contributions to this part are dealing with specific aspects of this molten core-concrete interaction (MCCI), a large part of this editorial paper concerns the status of knowledge and modeling and the lines of research in this area. The status and the perspectives of codes is especially addressed by own contributions of one of the authors with the GRS code WEX and with MEDICIS, both codes included in the European integral code ASTEC. Finally, the coolability questions are discussed with respect to the different concepts in general and those addressed specifically in the present contributions. In some considerations, gas production by erosion plays a role to produce porous or particulate debris and thus to enhance coolability. Water injection from bottom is a more direct and probably more effective measure to reach this, specifically designed in the COMET core catcher concept. Specific contributions in this part deal with this concept, which is most closely related to the general subject of the present issue.     

Fatigue crack propagation properties from small sized rod specimens

Mechanical properties characterization is needed in many industrial applications yet sufficient amount of material for fabricating standard-sized testing specimens is often not available. Techniques for testing miniaturized specimen must be adopted. Much effort has been made to develop techniques for impact, fracture toughness and tensile properties of sub-sized specimens. Work on the testing of fatigue properties is more limited. In this study, fatigue crack propagation behavior is evaluated from the growth of surface crack in a cylindrical rod under tension. Rods of various lengths and diameters were tested. As the size of the rod specimen is reduced, the fatigue crack growth rate tends to increase when correlated using the stress intensity factor range. This increase is explained largely by the decrease in the degree of premature crack closure in the small specimens. Valid fatigue crack growth data can be obtained among the specimens examined except on the crack growth on the surface of the smallest specimen, which has a length of 26 mm and diameter of 8 mm. Even so, valid data can still be elucidated on the latter specimen if the interior growth is considered. The dimensions of the latter specimen allow fatigue properties to be evaluated using broken remnants from impact or other test specimens.     

A frame-based knowledge representation model and its mapping to nested relations

The first part of this paper introduces the basic constructs of a frame representation model and gives a formal definition for them. Subsequently the nested relational model (NF²) is described as an extension of the classical relational model to support relation-valued attributes. In the second part of this paper both models are compared with each other and a mapping of frame representation structures to NF² structures is specified. The structural similarities between frames and NF² relations are made clear and it is shown that their main difference is due to the type polymorphism introduced by the concept hierarchy of the frame model. This causes type collisions to occur in the strictly typed NF² model when frames are directly mapped to NF² structures. Two solutions to this problem are suggested and compared. The paper concludes with a reformulation of query operations of the frame model in terms of NF² algebra operations.     

La doping effects on intergrowth Bi2WO6–Bi3TiNbO9 ferroelectrics

La doping effects on intergrowth Bi₂WO₆–Bi₃TiNbO₉ ferroelectric ceramics were studied by X-ray diffraction, electron probe microanalysis and dielectric spectroscopy. It was found that the La³⁺ distribution, ferroelectric phase transition and dielectric relaxation behavior are apparently affected by La doping. With increasing La³⁺ content, the site of dopant ion varies, the grain growth of Bi₅TiNbWO₁₅ is restrained, the Curie temperature is reduced and broadened. Furthermore, two dielectric relaxation loss peaks were observed both in temperature and frequency spectra. The calculated relaxation parameters revealed the oxygen vacancy related to the relaxation process.     

Mechanical properties of iron processed by severe plastic deformation

In the present study, the mechanical properties of Fe processed via severe plastic deformation (equal-channel angular pressing (ECAP)) at room temperature were investigated for the first time. The grain size of annealed Fe, with an initial grain size of about 200 μm, was reduced drastically during ECAP. After eight passes, the grain size reaches 200 to 400 nm, as documented by means of transmission electron microscopy (TEM). The value of microhardness during pressing increases 3 times over that of the starting material after the first pass and increases slightly during subsequent pressing for higher-purity Fe. Examination of the value of microhardness after eight passes as a function of post-ECAP annealing temperature shows a transition from recovery to recrystallization, an observation that resembles the behavior reported for heavily deformed metals and alloys. The tensile and compression behaviors were examined. In tension, a drop in the engineering stress-engineering strain curve beyond maximum load was observed both in the annealed Fe and the ECAP Fe. This drop is related to the neck deformation. The fracture surface, examined by scanning electron microscopy (SEM), shows vein patterns, which is different from the dimples found on the fracture surface of annealed Fe. In compression, an initial strain-hardening region followed by a no-strain-hardening region was observed in the ECAP Fe. The yield strength in tension of the ECAP Fe was observed to be higher than that in compression. The strengthening mechanisms and softening behavior are discussed.     

Analysing inaccurate artifact usages in workflow specifications

Although many workflow models have been proposed, analyses on artifacts are seldom discussed. A workflow application with well structured and adequate resources may still fail or yield unexpected results in execution due to inaccurate artifact manipulation, for example, inconsistency between data flow and control flow, or contradictions between artifact operations. Thus, artifact analysis is very important since activities cannot be executed properly without accurate information. This paper presents a three-layer workflow model for designing a workflow and characterises the behaviour of an artifact by its state transition diagram. By abstracting common usages of artifacts, six types of inaccurate artifact usage affecting workflow execution are identified and a set of algorithms to detect these inaccurate usages in workflow specifications is presented. An example is demonstrated and then related works are compared.     

Squeeze-film effects in MEMS devices with perforated plates for small amplitude vibration

Squeeze-film effects of perforated plates for small amplitude vibration are analyzed through modified Reynolds equation (MRE). The analytical analysis reckons in most important influential factors: compressibility of the air, border effects, and the resistance caused by vertical air flow passing through perforated holes. It is found that consideration of air compressibility is necessary for high operating frequency and small ratio of the plate width to the attenuation length. The analytical results presented in this paper agree with ANSYS simulation results better than that under the air incompressibility assumption. The analytical analysis can be used to estimate the squeeze-film effects causing damping and stiffness added to the system. Since the value of Reynolds number involved in this paper is low (< 1), inertial effects are neglected.     

High Throughput Primer Walking of cDNA Clones

Primer walking of cloned DNA is a standard research tool. It has been used in the past to determine the sequence of individual clones of interest. With the expansion of DNA sequencing capacity the need to be able to walk larger numbers of clones has become necessary. Our laboratory is a mid-sized genomics facility. In conjunction with the Advanced Biomedical Computing Center (ABCC) we have developed methods for automating the primer selection, DNA sequencing, contig assembly and sequence analysis for clones arrayed in microtiter format. This approach has allowed us to walk 475 clones (five microtiter plates) selected from a cDNA library.