The current research on ferroelectric photovoltaic materials is concentrated on enhancing the output photocurrent. As solar cells operate at high temperatures, it is crucial to take into account the effect of increasing temperatures on ferroelectric photovoltaics. In this study, an LNO (lanthanum nickelate, LaNiO3)/BFO (bismuth ferrate, BiFeO3)/ITO (indium tin oxide) device is constructed on a mica substrate by sol–gel method. The device achieves output photocurrent enhancement at a wide temperature range (33–183 °C), with the largest photocurrent enhancement at 130 °C, which is 178% relative to room temperature, and the output power is also increased by 9.88 times. At the same time, compared with BFO bulk, it is found that the performance of BFO film is always higher than that of bulk in the test temperature range, and the output photocurrent of BFO film at room temperature is 104 times higher than that of bulk. This article investigates the effect of high temperatures on ferroelectric photovoltaics and also provides a strategy for enhancing the photovoltaic performance of ferroelectric films, providing guidance for future applications of ferroelectric films in flexible solar cells and other applications. 相似文献
As a less O2-dependent photodynamic therapy (PDT), type I PDT is an effective approach to overcome the hypoxia-induced low efficiency against solid tumors. However, the commonly used metal-involved agents suffer from the long-term biosafety concern. Herein, a metal-free type I photosensitizer, N-doped carbon dots/mesoporous silica nanoparticles (NCDs/MSN, ≈40 nm) nanohybrid with peroxidase (POD)-like activity for synergistic PDT and enzyme-activity treatment, is developed on gram scale via a facile one-pot strategy through mixing carbon source and silica precursor with the assistance of template. Benefiting from the narrow bandgap (1.92 eV) and good charge separation capacity of NCDs/MSN, upon 640 nm light irradiation, the excited electrons in the conduction band can effectively generate O2•− by reduction of dissolved O2 via a one-electron transfer process even under hypoxic conditions, inducing apoptosis of tumor cells. Moreover, the photoinduced O2•− can partially transform into more toxic •OH through a two-electron reduction. Moreover, the POD-like activity of NCDs/MSN can catalyze the endogenous H2O2 to •OH in the tumor microenvironment, further synergistically ablating 4T1 tumor cells. Therefore, a mass production way to synthesize a novel metal-free type I photosensitizer with enzyme-mimic activity for synergistic treatment of hypoxic tumors is provided, which exhibits promising clinical translation prospects. 相似文献
A detecting method of investigating the function of crack width versus fiber Bragg grating (FBG) spectrum deformation was proposed. In this paper, the bond-slip model of deformed steel bar in concrete slab was used to calculate the crack width. The stress distributions along optic-fiber grating were extracted by the three-dimensional (3D) finite element method (FEM) and the spectrum deformation of FBG induced by the uneven distribution of the stress was calculated. Experiments were carried out with an FBG fixed on the bottom of concrete slab. The crack width and FBG spectrum deformation of experimental results were given, and the function of crack width versus wavelength shift of FBG sensor was given also. The proposed technology in this paper could improve the safety of large-scale concrete building by early identification of structural crack. 相似文献
rials, CaTiO3:Yb3+/Er3+/Zn2+ nanocubes with uniform size were prepared by solvothermal method in this paper. They were respectively characterized by X-ray diffractometer (XRD), scanning electron microscope (SEM), photoluminescence (PL) spectroscopy and their fluorescence lifetimes. The results show that the average size of the nanocubes is about 550 nm×650 nm×850 nm with good upconversion luminescence (UCL) properties. Under 980 nm laser excitation, the effects of the ratio between activator Er3+ and sensitizer Yb3+ and Zn2+ doping on the upconversion fluorescence properties were investigated, and the optimal ion ratio was obtained. The results of steady-state spectra show that the strongest fluorescence intensity of CaTiO3:Yb3+/Er3+ was obtained with the addition of 10 mol% Zn2+ at a Yb3+/Er3+ molar doping ratio of 3:0.3, which was attributed to the crystal field asymmetry generated by the introduction of Zn2+ ions. The energy transfer and upconversion mechanism between Yb3+ and Er3+ ions in CaTiO3 nanocubes were investigated by analyzing the upconversion fluorescence kinetics. 相似文献
We demonstrate a facile and effective approach to significantly improve the photoluminescence of bulk MoS2 via laser thinning followed by gold particle decoration. Upon laser thinning of exfoliated bulk MoS2, photoluminescence emerges from the laser-thinned region. After further treatment with an AuCl3 solution, gold particles self-assemble on the laser-thinned region and thick edges, further increasing the fluorescence of bulk MoS2 28 times and the Raman response 3 times. Such fluorescence enhancement can be attributed to both surface plasmon resonance and p-type doping induced by gold particles. The combination of laser thinning and AuCl3 treatment enables the functionalization of bulk MoS2 for optoelectronic applications. It can also provide a viable strategy for mask-free and area-selective p-type doping on single MoS2 flakes.