类金刚石膜的制备及其影响因素

概述了近年来制类金刚石膜的新技术如双射频辉光放电（RF－RF）法，射频－直流辉光放电（RF－DC）法和微波－射频（MW－RF）法等，并且对影响类金刚石膜制备及性能的因素如基体材料，制备类金刚石膜时在膜中添加元素，类金刚石膜与基材之间的中间层等进行了较全面的分析。     

α黄铜选择性溶解的研究

采用恒电流E-t曲线与旋转盘环电极方法研究了α黄铜(Cu32Zn)在酸性Na2SO4和HNO3稀溶液中的阳极溶解行为,得到的典型E-t曲线上存在几个特征区,证明在较低电流密度条件下的初始阶段只存在Zn的选择性溶解。用恒电位法研究了Cu32Zn选择性溶解过程,得到了按抛物线衰减的暂态扩散曲线,由i-t-1/2直线关系求得了不同介质中Cu32Zn中Zn的固相扩散系数D在10-16～10-13cm2·s-1数量级,发现中性介质中测出的D值比酸性介质中要大两个数量级。     

Kinetics of synthesis of Li4Ti5O12 through solid-solid reaction

1. Introduction The solid-solid reaction used in synthesizing various kinds of electrochemical materials has many advantages, such as simple process, without using solvent, saving energy, friendly to the environment and easy to obtain good quality materials like nano-size materials. Recently, the manufacturing of electrochemistry materials has been paid more atten- tion due to its increasing needs. Therefore it is a natural interest to study the synthesis of electro- chemical materials by usin…     

Preparation and properties of PAn/ATTP/PE conductive composites

Polyaniline/Attapugite/PE（PAn-ATTP/PE）composites containing particles with core-shell structure were obtained via the two-step blending processs. The experimental condition is as follows： Organo-attapulgite and PAn was obtained by modifying attapulgite with laury benzenesulfonic acid sodium salt and, then added to PE. The electrical conductivity, structure and properties of the composites were studied. Under the function of shear stress, core-shell structure particles with ATTP as the core and PAn as the shell were formed in the composites. The structure of PAn-ATTP/PE composites were characterized by FTIR,XRD,SEM, etc, respectively. The effects of concentration of doping agent on the conductivity and mechanical property of the composites were investigated. The mechanical properties and impact fracture surface of the ternary composites were studied by means of the tensile tester, SEM, etc. The results show that polyaniline encapsulated ATTP enhances the strength of the PE. And the conductivity of PAn-ATTP/PE composites of is improved effectively when polyaniline encapsulated ATTP is added. The composite have good conductivity when 10% polyaniline encapsulated ATTP is added.     

400MPa级超级钢不同焊接方法焊接接头组织性能分析

采用手工电弧焊，二氧化碳气体保护焊，等离子弧焊焊接400MPa级超级钢，并对焊接接头显微组织及力学性能作了分析研究，结果表明，实际生产中可以应用二氧化碳气体保护焊焊接400MPa级超细晶粒钢。     

有限元模型转换及其在金属板料成形数值模拟中的应用

本文根据CAD和CAE软件各自的功能和特点 ,探讨了板料成形数值模拟中CAD模型向CAE模型转换的方法 ;并针对有限元分析软件ANSYS与ABAQUS的实际特点 ,编写了有限元模型转换接口程序 ,用实例验证了所编接口转换程序的可行性与正确性。     

用CAXA电子图板求解冲模压力中心

在模具设计中 ,冲裁模压力中心通常采用解析法或图解法求解。本文提出一种用CAXA绘图软件在设计制图时直接求解的方法 ,快速直接 ,简单方便 ,精度较高。     

冷却条件对超级钢钨极氩弧焊焊接接头组织性能的影响

采用钨极氩弧焊焊接方法对400MPa级超级钢进行焊接，并对焊后空冷和水冷两种冷却条件下的焊接接头进行了组织性能分析。研究结果表明，水冷条件下，其接头的综合力学性能要优于空冷条件，可以应用与实际生产。     

铈和锰掺杂纳米TiO2的溶胶-凝胶法制备及其光催化性能

采用溶胶-凝胶法制备了TiO₂、Mn⁴⁺/TiO₂、Ce⁴⁺/TiO₂和Mn⁴⁺-Ce⁴⁺/TiO₂光催化剂。通过考察掺杂离子的种类和用量对所得催化剂用于紫外光催化降解甲基橙性能的影响，表明Ce⁴⁺/TiO₂中Ce⁴⁺的适宜掺杂量为1.0%，Ce⁴⁺-Mn⁴⁺/TiO₂中，当Mn4+的掺杂量为25.0%时，Ce⁴⁺的适宜掺杂量为0.50%，相应的脱色效率为92.39%和99.41%。当掺杂量适当时，四种催化剂用于紫外光催化降解甲基橙的活性次序为：Mn⁴⁺-Ce⁴⁺/TiO₂ > TiO₂>Ce⁴⁺/TiO₂> Mn⁴⁺/TiO₂。XRD分析结果表明，所得光催化剂均为锐钛矿型纳米粒子。     

黄金冶炼厂污染源治理技术

本文阐述了采用加温加压无氰解吸、金电解精炼，活性炭酸洗、火法再生产工艺，所产生污染物的治理技术。