配电线路不停电作业机器人研究

从传统的人工带电作业方式出发,根据国内外不停电作业机器人的发展现状,对机器人带电作业方式进行分类,并结合具体实例,描述了我国不停电作业机器人的特点,对该领域存在的问题进行分析和展望.     

准均匀电场下C5F10O/干燥空气与C5F10O/N2的绝缘特性

SF_6因优异的电气特性广泛应用于电器绝缘设备中,但其产生的温室效应对大气环境具有极大损害。近年来,C_5F_(10)O作为一种环保型SF_6潜在替代气体受到国内外科研工作者的关注。为进一步探究C_5F_(10)O/干燥空气与C_5F_(10)O/N_2的绝缘特性,文中利用气体绝缘性能测试平台,对不同气压、不同C_5F_(10)O分压下的2种混合气体在准均匀电场下进行工频击穿试验。实验结果表明,C_5F_(10)O混合气体绝缘强度随气体压强的增大而增大;提高C_5F_(10)O分压亦可提高两类缓冲气体的绝缘强度,且对N_2绝缘强度提升相对值大于干燥空气。从绝缘强度考虑,适当增大C_5F_(10)O混合气体气压和C_5F_(10)O分压,C_5F_(10)O/干燥空气比C_5F_(10)O/N_2混合气体更具潜力替代室内中低压设备中的SF_6。     

Facile Fabrication of Povidone Iodine-Embedded Polytetrafluoroethylene Superhydrophobic Films with Improved Antiadhesive and Bactericidal Properties in Bacterial Environments

It remains a challenge to maintain the antiadhesion properties of superhydrophobic films after exposure to bacterial environments. In this work, superhydrophobic bactericidal polymer films via the simple incorporation of polyvinylpyrrolidone-iodine (PVP-I) or iodine into polytetrafluoroethylene (PTFE) are fabricated to improve their antiadhesive and antibacterial capability. Superhydrophobic iodine-embedded films, polytetrafluoroethylene/polyvinylpyrrolidone-iodine and polytetrafluoroethylene-iodine (PTFE/PVP-I and PTFE-I), show excellent antiadhesive and bactericidal performances even post exposure to bacterial solutions as compared to iodine-free counterparts by controlling the release of iodine. Especially, superhydrophobic PTFE/PVP-I films display a more sustained iodine release profile and significant antibacterial properties against gram-positive (S. aureus, methicillin-resistant S. aureus (MRSA)) and gram-negative (E. coli) bacteria. Such a facile combination of antiseptic agents and superhydrophobic surface could be widely used for antiseptic biomedical applications.     

Microstructural evolution and interfacial reactions between Ti and ZrO2/CaTiO3 composites

Various proportions of ZrO₂/CaTiO₃ powders were mixed and hot pressed at 1500°C/30 min for Ti casting. The hot-pressed ZrO₂/CaTiO₃ composites were reacted with pure Ti at 1700°C/10 min in Ar. The interfacial reaction between Ti and ZrO₂/CaTiO₃ composites was investigated through X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The ZrO₂/CaTiO₃ composites with less than 10 vol.%, CaTiO₃, and a minor amount of residual TiO₂ were found. When the content of ZrO₂ was increased to larger than 10 vol.%, two Ca₂Zr₅Ti₂O₁₆ and CaZrTi₂O₇ phases appeared in the composites. The amount of CaTiO₃ and CaZrTi₂O₇ in the composites gradually decreased as the amount of ZrO₂ increased. When Ti came in contact with ZrO₂/CaTiO₃ composites with less than 10 vol.% ZrO₂, the resulting eutectic reaction produced a liquid phase and induced melting. When ZrO₂ was increased to more than 30 vol.% in the composites, Ca₂Zr₅Ti₂O₁₆ and CaZrTi₂O₇ changed completely to CaZrO₃, Ti₂O, CaO, and ZrO₂. With more than 30 vol.% ZrO₂, no other reaction phases occurred in the Ti side after contact with the ZrO₂/CaTiO₃ composites, which is conducive for producing ceramic composites for Ti casting applications.     

浅谈贵冶转炉残极加料机无液压控制及应用

转炉残极加料机是贵冶转炉重要辅助设备之一。本文分析了贵溪冶炼厂熔炼车间转炉残极加料机运行过程存在的问题。从设备管理角度出发,分析故障原因并提出改进措施。同时改变现有残极加入的方式,顺应时代趋势,实现自动化、岗位无人化操作并在一定程度上得到应用。     

基于离散裂缝模型的页岩油储层压裂渗吸数值模拟

对于含黏土矿物较高的页岩油储层,地层水的矿化度可高达4.786×103 mol·m?3,压裂过程中与注入的低矿化度压裂液形成的渗透压作用显著。为探究渗透压对渗吸的影响作用,建立了综合考虑渗透压和毛管力渗吸作用的油水两相二维离散裂缝网络模型,开展了页岩油储层压裂液泵注和关井阶段渗透压、毛管力、关井时间、盐浓度、膜效率、分支缝面积占比等对渗吸的影响规律研究。结果表明:①滤失主要由压力差、毛管力和渗透压3种机制驱动,其中压力差是滤失的关键控制机制;②关井时间对压裂液的渗吸作用影响较大,关井50 d时,前15 d渗吸量可达到总渗吸量的80%,且关井压力扩散会波及到两侧压裂段;③与压力扩散相比,渗透压达到平衡的时间较长,对于地层水矿化度为4.786×103 mol·m?3的情况,裂缝附近的矿化度达到600 mol·m?3左右所需关井时间为50 d;④由于压力差是渗吸主要驱动力,页岩膜效率对渗透压力扩散影响微弱,页岩膜效率30%与5%相比渗吸量仅增加4%;⑤对于密切割压裂,关井后,含水饱和度受小间距水力裂缝控制,分支缝对渗吸含水饱和度的影响有限。      

沸腾焙烧铝电解烟道灰及电解应用综述

含碳多的铝电解烟灰的处理难度较大 ,沸腾焙烧处理法效果较好。并大批量生产应用效果优良。同时掌握了处理铝电解碳渣及铝灰工艺技术。为综合利用铝电解废渣打下了基础     

含钛高炉渣制备CaTiO3-多孔地质聚合物光降解吸附材料

含钛高炉渣作为固体废弃物,国内存量巨大,且其中的钛组元难以提取,导致含钛高炉渣综合利用一直没有得到有效解决。针对当前含钛高炉渣利用率低、附加值低等问题,基于含钛高炉渣成分特点,通过选择性析晶(CaTiO₃优势析出)、碱激发,制备出CaTiO₃-多孔地质聚合物的复合材料。试验结果表明,析晶温度1 400 ℃、保温1 h能够促进CaTiO₃的优势析出,而剩余氧化物以玻璃相形式存在。制备出的CaTiO₃-多孔地质聚合物材料结合了CaTiO₃高光催化活性与多孔地质聚合物比表面积大的优点,对亚甲基蓝具有优异的吸附效果,最大吸附量可达60.4 mg/g。在投加量为50 mg,2 h吸附、3 h光降解条件下,对亚甲基蓝去除率可达94.5%,在治理有机污染领域有良好的应用前景。     

基于VRML-Java的零件参数化仿真的实现

以实现基于网络的三维形体的参数化仿真为目的,采用VRML-Java作为开发平台,以螺栓零件为例,提出了实现零件交互式、参数化、动态仿真的一种方法.     

Influence of heat treatment on fracture and magnetic properties of radially oriented Sm2Co17 permanent magnets

The quenching, fracture and aging treatment of radially oriented Sm2Co17 ring magnets were investigated. The results indicate that the ring magnets have obvious anisotropy of thermal expansion, which easily leads to the splits of the magnets during quenching. The fracture is brittle cleavage fracture. The difference （Aa） of the expansion coefficient reaches the maximum value at 800-850 ℃. So, various quenching processes at different steps are adopted in order to reduce the splits. When the magnets are aged, 1：5 phase precipitates from the 2：17 matrix phase and forms a cellular microstructure with 2：17 phase. BHmax and JHc reach the maximum value 226 kJ/m^3 and 2 170 kA/m after being aged at 850 ℃ for 4 h and 8 h, respectively. The aging treatment at 850 ℃ has little influence on remanence（Br）, which can always keep a high value （≥1.0 T）. Through appropriate heat treatment, the ring magnets have uniform cellular microstructure and excellent magnetic properties： Br ≥ 1.0T, JHc ≥2 100 kA/m, BHmax ≥ 220 kJ/m^3.