提高φ5m×11.5m生料磨产量的措施

针对粘土资源枯竭问题,江苏巨龙水泥集团实施了以粉煤灰和硅石代替粘土的技改工程。但改造后因原料的变更,导致入房物料易磨性变差而影响了φ5m×11.5m生料磨的产质量,并进一步影响察系统的运行。因此该厂在工艺分析的基础上,采取了调整钢球级配、用高铬球替代合金刚球、改造选粉机、加强石灰石二破的管理和减少系统是否是“漏风”等技术措施,效果显著。改造后的生料磨台时产量比调整前提高了12t/h,且节电效果显著。     

氟化铵溶解含氟硅渣制备氟硅酸铵的实验研究

以氟化铵溶液和含氟硅渣为原料,通过化学溶解的方式,制备氟硅酸铵产品。考察了反应温度、反应时间、氟化铵溶液浓度和物料配比（氟化铵与二氧化硅的物质的量比）等不同工艺条件对氟硅酸铵收率、二氧化硅转化率的影响。实验结果表明：反应温度为93 ℃、反应时间为60 min、氟化铵溶液质量分数为20%~30%、物料配比为6∶1.1、反应体系搅拌速度为200~300 r/min时,氟硅酸铵的收率和氟化铵的转化率可控制在90%以上。     

Optimization of injection molding design. Part I: Gate location optimization

The placement of a gate in an injection mold is one of the most important variables of the total mold design. The quality of the molded part is greatly affected by the gate location, because it influences the manner in which the plastic flows into the mold cavity. Some defects, such as weldline and overpack, can be effectively controlled only by the gate location. Therefore, the product quality can be greatly improved by determining the optimum gate location. In this paper, we develop a general methodology for gate location optimization. We first quantify quality in terms of flow simulation outputs. We can thus assess detrimental effects such as warpage and dimensional instability as a function of the independent variable, which is in this case the gate location. Next we develop methods to search for the optimum gate location. The search method introduced in this paper is a method that combines a deterministic hill climbing search with a stochastic annealing search method. The method is appropriately called simulated annealing and hill climbing (SANHIL). The criteria used for evaluation during the search process are a function of the flow simulation outputs. We demonstrate the success of the method for a complex industrial mold. The approach is applicable to any complex mold geometry and any plastic.     

立足于创造性思维与实践能力培养的服装设计专业“项目设计”课程改革研究

针对现有服装设计专业“项目设计”课程存在的问题,根据服装产业市场发展的新趋势,提出立足于创造性思维与实践能力培养研究该课程内容及课程体系结构设置等方面的改革思路与举措。改革强调以学生为中心。培养创造性思维与实践能力相结合的复合型人才,以互动式教学与启发式教学为核心,促进由“以教师为中心的知识传授方式”向“以学生为中心,激励自己去发现和创作的教学方式”转变。并经初步改革的教学实践证明该课程的改革是可行的。     

基于WINCE系统软件开发的内存研究

WINCE系统内存配置较小,嵌入式软件如果出现内存泄露问题,将会导致系统的可用内存不足,甚至出现系统崩溃。为此针对WINCE操作系统内存的管理和应用,通过引入一个在实时更新动态图的过程中出现内存泄露的案例,阐述了关于内存管理和内存应用的重要知识点,包括内存模型和内存分配方式,分析了在该案例中出现内存泄露的原因,提出了与案例中出现的内存泄露相似问题的解决方法,并针对一般情况下如何防止内存泄露作了简单介绍,最后详细阐述了案例中为了优化内存所做的工作,对编程者有很好的指导作用。     

基于网络中控技术的多媒体教室管理与监控系统的应用

设计基于网络中控技术的多媒体教室管理与监控系统,该系统能够将高校各个独立的多媒体教室管理与监控系统关联到一起进行管理,实现集远程管理、监控、维护于一体的应用系统,提高高校多媒体应用水平。     

Effects of the reinforcement and toughening of acrylate resin/CaCO3 nanoparticles on rigid poly(vinyl chloride)

Novel composite particles based on nanoscale calcium carbonate (nano‐CaCO₃) as the core and polyacrylates as the shell were first synthesized by in situ encapsulating emulsion polymerization in the presence of the fresh slush pulp of calcium carbonate (CaCO₃) nanoparticles. Subsequently, these modified nanoparticles were compounded with rigid poly(vinyl chloride) (RPVC) to prepare RPVC/CaCO₃ nanocomposites. At the same time, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were investigated, and the synergistic effect of modified nanoparticles with chlorinated polyethylene (CPE) was also studied. The results showed that in the presence of nano‐CaCO₃ particles, the in situ emulsion polymerization of acrylates was carried out smoothly, and polyacrylates successfully encapsulated on the surface of nano‐CaCO₃ to prepare the modified nanoparticles, breaking down nano‐CaCO₃ particle agglomerates, improving their dispersion in the matrix, and also increasing the particle–matrix interfacial adhesion. Thus, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were very significant, and the cooperative effect of the nanoparticles with CPE occurred in the united modification system. Scanning electron microscopy analyses indicated that large‐fiber drawing and network morphologies coexisted in the system of joint modification of nanoparticles with CPE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3940–3949, 2007     

基于逐次散射法的海洋-大气矢量辐射传输模式

首先推导了粗糙洋面双向偏振反射模型pBRDF(Bidirectional Polarized Reflectance Distribution Function),并将其与SOSVRT(Successive Order of Scattering Radiative Transfer)矢量辐射传输模式耦合,建立了海洋-大气耦合的矢量辐射传输模式,并对该耦合模式的模拟结果与前人模拟结果进行对比,验证了该耦合模式的可靠性与有效性。不同大气和洋面状态、不同高度的主平面内辐射强度和偏振度的模拟结果表明:pBRDF模型可以很好地模拟不同风速下洋面的偏振反射分布特征;洋面在特定角度具有很高的偏振度,并对大气顶的偏振辐射有很大影响。因此,该耦合模式可以更准确地处理辐射光谱在海洋-大气两种介质间的传输问题,对矢量辐射传输、大气遥感问题的研究有重要意义。     

熔融片制样法在水泥行业荧光分析中的应用

近年来,我国的新型干法水泥技术发展迅速,大规模的水泥生产线相继投产,为了适应生产线的质量控制与检验的需要,绝大多数5000t/d以上的水泥企业都使用了X射线荧光分析仪,这种仪器以其分析速度快、测量结果可靠而受到了水泥企业的青睐,但由于所选用的制样方法不同,使得仪器的使用