Stability and work hardening of an Fe-12Cr-23Mn austenitic steel

The effect of pre-strain on the strain-induced martensitic transformation of an Fe-12Cr-23Mn austenitic steel has been investigated through transmission electron microscopy and X-ray analysis. Pre-strain was performed either at room temperature or at 200° C. Final strain was carried out at liquid-nitrogen temperature. The phase was shown to form on {1 1 1} planes of the austenite matrix predominantly by overlapping of stacking faults. The martensite transformation sequence was . Nucleation of the phase mainly occurred at intersections of bands. Austenite stability was shown to increase by pre-strain at 25° C or 200° C. Pre-strain at 200° C has a greater effect on austenite stability than does pre-strain at 25° C. The mechanism was discussed in terms of martensite transformation rate and various substructures introduced during straining. Work hardening was shown to depend on the degree of pre-strain and final strain. The correlation between work hardening and substructures introduced during straining was examined.     

Inhibition behavior for copper corrosion by photoelectrochemical methods

wavelengthofmono chromatelightwas 4 2 0nm .3　RESULTSANDDISCUSSION3.1　ApplicationofphotoelectrochemicalmethodtoevaluatetheeffectsofinhibitorsforcoppercorrosionThestructuresoftheinhibitorsforcoppercorro sionshownintextareasfollows:Theinhibitioneffectsofdifferentinhibitorsforcoppercorrosioncanbeevaluatedby photoelec trochemicalmethod .AsshowninRef .[12 ],onanegativepotentialscan ,thepotentialcorrespondingtothecathodicphotocurrentJph=0isdefinedasΦV,atwhichCu2 Oontheelectrodesurfaceisc…     

Study on heat conduction and adsorption/desorption characteristic of MIL-101/few layer graphene composite

Journal of Porous Materials - Aiming at the poor heat conduction performance of porous MIL-101 applied in adsorption cooling process, few layer graphene (FLG) was selected as a promising thermal...     

粉煤灰填充尼龙6浇铸制品的研究

将粉煤灰用硅烷偶联剂处理后填充到尼龙6浇铸制品(MC尼龙)中,可以改善制品的吸水性、收缩率及热稳定性等,还可以降低成本。该项研究结果有很大的实用价值。     

Simulation of the tubular positive electrode of the lead-acid battery

The discharge performance of a tubular electrode of the lead-acid battery based on a pseudo steadystate approach was simulated. It was found that the discharge reaction started from the central interior region instead of from the outer surface as in the usual plate-type electrodes. This is due to the fact that the central region has a smaller reaction surface than the outer region of the tubular electrode. This consequently causes a higher current density near the center. A comparison of the theoretical prediction and experimental result shows that the model is fairly accurate except for very high rate discharge conditions.     

Calendering of non-newtonian fluids

The calendering of non-Newtonian fluids by two rotating cylinders to produce thin films of fluids finds wide application in polymer sheet-making and food-drying industries. Theoretical work has previouly been devoted to the symmetrical case where the cylinders are of equal diameters rotating at the same speed. The present work proposes a new one-film theory of calendering of power law fluids for unequal radii and surface velocities of the calendering cylinders. The relationship between the dimensionless thickness of the calendered fluid, Δ_e^* and that of the incoming fluid, Δ_i^* is shown to be a function of the ratio of the surface velocities of the cylinders and the power law index. The result further shows that Δ_e^* tends to asymptote after the second decade of Δ_i^*     

Surface morphology and nodule formation mechanism of cellulose acetate membranes by atomic force microscopy

By the use of atomic force microscopy (AFM), formation mechanism of nodular structure in cellulose acetate membranes was systematically investigated. Elementary factors affecting the nodule formation were delineated on the basis of both kinetic and thermodynamic considerations. It was shown that (1) the exact nature of nodular structure is thermodynamic equilibrium glassy state; nodular structure will vanish in the rubbery state; (2) the thermodynamic factor affecting nodule formation is the membrane formation temperature; with the membrane formation temperature decreasing, more chain segments are able to form nodular structures; (3) nodule formation is dependent on the segment rearrangement; variation of the solvent environment is the major kinetic factor affecting the segment rearrangement and nodule formation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1328–1335, 2003     

我国烧碱生产技术概况

介绍了我国氯碱行业近几年来的发展情况：分析了我国烧碱生产的工艺技术现状。指出了为缩短与世界先进国家的差距需要加快开发关键设备和高性能的离子膜，加强管理。     

基于面向服务的泥石流数值模拟通用平台

对当前泥石流模拟系统的单一性缺点进行了研究,提出了面向服务的泥石流数值模拟的通用平台思想。以有限差分模型为基础,采用面向服务的思想,设计了系统 C/S模式的技术方案并完成了整个系统的设计和实现。经过香港滑坡地形图的验证,证明了本通用平台的可行性和有效性。