一种基于Lange耦合器的S波段小型化集成功放

设计了一种全部采用国产芯片研制的小型化集成功放模块。该模块采用一种全新的结构模式,通过Lange耦合器将GaAs MMIC单片、单电源GaAs功率芯片和硅功率芯片混合集成,使得其体积比同等性能的功率放大器减小。测试结果表明,在工作电压36V、脉宽300μs、占空比10%的测试条件下,2.7～3.1GHz或3.1～3.4GHz带内输出功率均能达到50W,36V电源效率大于40%。     

Au丝键合改为Cu丝键合技术

现阶段Au丝作为内引线一直占着键合的主导地位,由于Cu丝具有优良的电性能和价格优势,随着键合技术的发展,以Cu丝代替Au丝作为键合用内引线已经成为必然,封装行业许多厂家正热衷于将原有的Au丝键合设备进行改造,但还存在这样那样的问题。以Au丝键合改为Cu丝键合的技术研究为出发点,首先介绍了键合技术的发展,然后通过工艺调整和设备改造,使得Cu丝作为内引线能够代替Au丝在该设备上使用,同时达到了节约生产成本,节约资金的目的。对改造过程中的气体流量、压力、功率、焊接时间等参数问题进行了详细地阐述,同时对芯片、键合劈刀等也做了相应调整,使得改造后的检测结果完全满足产品要求。大力推进以Cu丝替代Au丝键合技术,可节约生产成本,提高键合强度,增强导电率、导热率等,具有重要的经济技术效益,必将迎来封装业的又一次大变革。     

介入诊疗器械CAD开发系统中数据管理的实现

本文详细介绍了利用UGNX4.0开发介入诊疗器械CAD系统数据流程以及系统总体框架结构。研究了介入诊疗器械CAD系统开发中所采用的部件几何特征的创建、过工艺设计模块和零件加工模具与工装设计模块实现工艺库的建立等关键技术,提出了在UG/Open API程序中利用ODBC技术访问外部数据库的方法,以使应用程序能够从底层设置和控制数据库,完成一些高层数据库技术无法完成的功能,采用Access数据库将用户通过系统界面输入的产品信息保存。最后介绍了数据管理在CAD系统中的应用实例。     

Improved Scalar Multiplication on Elliptic Curves Defined over F2mn

We propose two improved scalar multiplication methods on elliptic curves over F_qn where q = 2^m using Frobenius expansion. The scalar multiplication of elliptic curves defined over subfield F_q can be sped up by Frobenius expansion. Previous methods are restricted to the case of a small m. However, when m is small, it is hard to find curves having good cryptographic properties. Our methods are suitable for curves defined over medium‐sized fields, that is, 10 ≤ m ≤ 20. These methods are variants of the conventional multiple‐base binary (MBB) method combined with the window method. One of our methods is for a polynomial basis representation with software implementation, and the other is for a normal basis representation with hardware implementation. Our software experiment shows that it is about 10% faster than the MBB method, which also uses Frobenius expansion, and about 20% faster than the Montgomery method, which is the fastest general method in polynomial basis implementation.     

Exhaustive Output Arbitration of Input Buffered Switch with Buffered Crossbar

We propose a new arbitration method for an input buffered switch with a buffered crossbar. In the proposed method, an exhaustive polling method is used to decrease the synchronization. Using an approximate analysis, we explain how the proposed method improves the switch performance. Also, using computer simulations, we show the proposed method outperforms the previous methods under burst traffic.     

Holography and plasma oxidation for uniform nanoscale two dimensional channel formation of vertical organic field-effect transistors with suppressed gate leakage current

Vertical organic field-effect transistors (VOFETs) with nanoscale channel openings have been fabricated using pentacene as an active layer material. To achieve uniform nanoscale two-dimensional channel openings, a laser holography lithography has been introduced. Uniformly distributed and well-aligned holes with 250 nm diameter were successfully obtained with the laser holography lithography. VOFET devices with these channel openings have shown high on/off ratio of about 10³ without any further treatment. Gate leakage current was also decreased with an additional insulating layer generated on the gate electrode sidewall via plasma oxidation.     

自旋尾翼弹头的双基地微多普勒研究

微动特征是弹道中段目标雷达识别的有效特征之一。针对基于自旋尾翼弹头的双基地微多普勒的自旋和结构参数估计问题,该文首先建立了自旋尾翼弹头双基地散射中心的微多普勒模型,然后利用FEKO计算了尾翼弹头的双基地散射系数,通过对散射系数序列的时频分析,验证了模型的正确性,同时总结了自旋尾翼弹头的双基地微多普勒特性,再分析了估计自旋和结构参数的可行性,最后,由于闪烁效应导致Hough变换已不能有效估计参数,该文提出了利用闪烁效应估计参数的新思路。     

Hot embossing of diffractive optically variable images in biaxially-oriented polypropylene

The hot embossing of grating-based optically variable devices has been demonstrated in biaxially-oriented polypropylene (BOPP). Embossing of the grating structures was examined over a range of temperatures (80-155 °C) at 135 kN force. However, only at temperatures above the glass transition temperature, T_g, was high quality replication achieved over a full embossing area of 80 × 80 mm. The embossing of several different types of optically variable device has been examined including portrait, non-portrait and 3-dimensional images. The images embossed into BOPP have displayed an optically variable effect when viewed in transmitted light.     

锐钛矿相TiO2电子结构和光学性质的第一性原理计算

采用第一性原理平面波超软赝势方法计算了锐钛矿相TiO2的电子结构和光学性质,并从理论上分析了它们之间的关系.利用精确计算的能带结构和态密度分析了电子带间跃迁占主导地位的锐钛矿相TiO2的介电函数、复折射率、反射率和吸收系数,理论计算得到的结果与实验测量结果基本一致.结果表明锐钛矿相TiO2在E//c和E上c两个极化方向上具有明显的光学各向异性,为锐钛矿相TiO2的应用提供了理论依据.