On the design of multiple key hashing files for concurrent orthogonal range retrieval between two disks

This paper concerns the following problem: given a set of multi-attribute records, a fixed number of buckets and a two-disk system, arrange the records into the buckets and then store the buckets between the disks in such a way that, over all possible orthogonal range queries (ORQs), the disk access concurrency is maximized. We shall adopt the multiple key hashing (MKH) method for arranging records into buckets and use the disk modulo (DM) allocation method for storing buckets onto disks. Since the DM allocation method has been shown to be superior to any other allocation methods for allocating an MKH file onto a two-disk system for answering ORQs, the real issue is knowing how to determine an optimal way for organizing the records into buckets based upon the MKH concept.

A performance formula that can be used to evaluate the average response time, over all possible ORQs, of an MKH file in a two-disk system using the DM allocation method is first presented. Based upon this formula, it is shown that our design problem is related to a notoriously difficult problem, namely the Prime Number Problem. Then a performance lower bound and an efficient algorithm for designing optimal MKH files in certain cases are presented. It is pointed out that in some cases the optimal MKH file for ORQs in a two-disk system using the DM allocation method is identical to the optimal MKH file for ORQs in a single-disk system and the optimal average response time in a two-disk system is slightly greater than one half of that in a single-disk system.     

High-temperature hydrothermal systems in West Yunnan Province, China

There are more than 660 thermal springs in West Yunnan Province, 30 of which are high-temperature hydrothermal systems with reservoir temperatures above 150°C.All thermal springs in West Yunnan are under the control of the tectonics, most of them being distributed at anticlinoria of metamorphic rocks and granites. This paper discusses the relationship between thermal areas and tectonics, the correlation between thermal springs in West Yunnan and North Thailand, and the geothermal prospects in West Yunnan.     

英那河水库扩建工程控制爆破技术--基础开挖及原坝砼拆除

砼拆除及扩建基础开挖采用控制爆破工艺,有效地加快了施工进度,提高了工程施工质量。     

液化石油气储罐火灾模拟试验——池火灾环境下

液化石油气储罐在火灾作用下，其内部的温度和压力会迅速上升，从而可能引起储罐爆炸，进而酿成危害性更大的二次灾害。为此，对液化石油气储罐在池火灾环境下的热响应情况进行了大量的模拟试验研究。研究发现，储罐在池火灾作用下存在着明显的热分层，热分层加速了储罐内部压力升高的速度；储罐内部温度分布和压力响应受到储罐类型、充装水平等因素的影响，压力随时间的变化关系可以用三次多项式加以拟合。     

鄂尔多斯盆地中侏罗世直罗—安定期沉积构造特征

中侏罗世直罗—安定期伴随大华北盆地分化瓦解,直罗—安定组除在鄂尔多斯盆地呈整体分布外,在其周邻地区亦有大量零星分布的同期可对比地层。在现今盆地内,直罗组主要为河流相沉积;安定组以干旱气候条件下的河流、湖泊相沉积为主。直罗—安定组的湖相沉积主要位于盆地东南部的古沉积中心部位,其堆积中心位于盆地西部的乌海—鄂托克前旗—平凉一线,堆积中心与沉积中心偏离。直罗组沉积前古构造格局为南高北低、东高西低。直罗—安定期的古地质面貌呈西北高东南低特点,南、北分异表现甚微。结合周邻同期地层岩性、岩相和现今构造单元形成时限等综合分析,认为直罗—安定期原始盆地的边界大致为:西在贺兰山之西,东达吕梁山之东、太行山以西,北抵大青山,南至秦岭。     

露天煤矿卡车运输轮胎消耗的原因分析及控制措施

通过分析黑岱沟露天煤矿轮胎消耗的主要原因，制定相应措施，降低轮胎消耗，降低生产成本。     

最大似然反褶积软件包的研制与应用

本文简明地介绍最大似然反褶积的基本原理、软件包的研制过程和应用效果。 最大似然反褶积是美国80年代研究出的一种地震资料处理新方法,它有效地解决了传统褶积模型中无法进行信噪分离的矛盾。经松辽盆地实践证明,它可以求出高分辨率和高信噪比的反射系数、最小相位化子波、合成记录、相对层速度和绝对层速度。与国外的VELOG和SEISLOG处理软件的处理结果相比,分辨率和信噪比均有很大的提高。 在软件包的研制过程中,我们主要解决了数学模型复杂和运算速度慢的问题,使最大似然反褶积在CYBER-855S计算机上成为可实用的数字处理技术。 该项技术在大庆油田朝阳沟地区进行了初步应用,结果表明,对薄层地震响应的分辨能力有明显的提高。与井岩性柱状图对比,6m以上的砂层都可以分辨出来,并且对应得比较准确。有些3m的薄层也可以找到。 该软件包的研制成功并在地震资料处理中得到应用,这在国内是首创。     

底排弹射击密集度的试验研究

底排弹底排装置的工作特性对底排弹的距离散布有着明显的影响。本文以初步的静态和飞行试验结果为依据,讨论了利用现有试验手段对底排因素引起的距离散布进行分析和计算的方法,并在此基础上提出了减小底排弹距离散布的途径。