Clonal analysis of peripheral blood lymphocytes from three patients with advanced neuroblastoma receiving recombinant interleukin-2 and interferon alpha

Cultures of both isolated and conjugated explants from early gastrulae of Bufo arenarum were prepared for a study of the development of ventral mesoderm. Only combinations including components of the deep ventral marginal zone and the animal pole successfully differentiated into blood cells (erythrocytes). Histological studies indicated that, while prospective mesodermal cells constituted the only source of such cells, prospective ectodermal cells provided the necessary stimulus for this kind of differentiation. Differentiated cultures, in which the tracer of cell-lineage fluorescein dextran amine was used to label these components, confirmed the above conclusions. These findings are discussed in the context of current concepts about the formation of mesoderm.     

Control-canonical-form method applied to generating systems to improve dynamic stability characteristics

Contents The control-canonical-form (CCF) method is introduced for the purpose of applying it to high-order state-space single-input single or multiple-output (SISO or SIMO) and multiple-input multiple-output (MIMO) linear time-invariant system models to determine closed-loop systems (i.e. design robust controllers) from which enchanced dynamic stability characteristics and overall performance of these systems is achieved. The method has been applied successfully to a SISO 6th-order linearized state-space open-loop model (representing a simplified hydro power system), and to a MIMO 8th-order linearized state-space open-loop model (representing an 87.5 kVA synchronous machine with conventional exciter supplying power to an electric utility system through an interconnection network)

---

Anwendung der kanonischen Form der Zustandsrückführung auf Erzeugersysteme zur Verbesserung der dynamischen Stabilitätseigenschaften

Übersicht Die Methode der kanonischen Form wird auf lineare zeitinvariante Systeme höherer Ordnung im Zustandsraum angewendet, die eine oder mehrere Eingangsgrößen bei einer oder mehreren Ausgangsgrößen aufweisen. Damit werden robuste Regler entworfen, welche die dynamische Stabilität und das gesamte Betriebsverhalten verbessern. Die Methode wurde erfolgreich auf ein linearisiertes Modell sechster Ordnung mit einem Eingang und einem Ausgang angewendet, das vereinfachend eine Wasserkraftanlage darstellt; außerdem auf ein linearisiertes Zustandsmodell achter Ordnung einer Synchronmaschine 87,5kVA mit konventioneller Erregung, die über ein Verbindungsnetzwerk in das öffentliche Netz einspeist.

     

Composition of lithium aluminoborosilicate glass and abrasive

The properties of glasses of the lithium-aluminoborosilicate system were investigated, namely, the density, spreadability, thermal expansion, and nature of crystallized phases at various temperatures. A crystal-optical analysis was conducted. The glasses were used to prepare abrasive compositions. Their strength properties were studied as a function of the composition of the glass binder and the regime of heat treatment.Translated from Steklo i Keramika, No. 3, pp. 27–30, March, 1996.     

Calculi with the greatest number

Translated from Kibernetika i Sistemnyi Analiz, No. 3, pp. 71–86, May–June, 1995.     

Cost-benefit analysis of power system reliability: two utility casestudies

There is an emerging recognition that utility investments and other decisions that affect electric service reliability should be explicitly evaluated on the basis of their cost and benefit implications. A cost-benefit approach that quantifies the reliability benefits of alternatives in terms of the reduction in costs resulting from unserved energy enables the evaluation of generation and transmission capacity additions on a consistent, economic basis. This approach has been applied to two utility case studies. In a case study for Pacific Gas and Electric Company, it was used to evaluate three options for maintaining reliability in a major load center-two involving local generation, and the third, a new 230 kV transmission connection. In a case study for Duke Power Company, the approach was used to evaluate alternative designs for proposed additions to a transmission station. This paper describes the methodology and presents the two utility studies     

A high-current and high-temperature 6H-SiC thyristor

A 6H-SiC thyristor has been fabricated and characterized. A forward breakover voltage close to 100 V and a pulse switched current density of 5200 A/cm² have been demonstrated. The thyristor is shown to operate under pulse gate triggering for turn-on and turn-off, with a rise time of 43 ns and a fall time of less than 100 ns. The forward breakover voltage is found to decrease by only 4% when the operating temperature is increased from room temperature to 300°C. It is found that anode ohmic contact resistance dominates the device forward drop at high current densities     

Pulsed-current duty cycle dependence of electromigration-inducedstress generation in aluminum conductors

The effect of duty cycle of pulsed dc currents on the critical length-current density product, (jl_c), was measured using the Blech-Kinsbron edge-displacement technique [Thin Solid Films 25, 327 (1975)]. Unencapsulated Al edge-displacement segments mere stressed at various duty cycles and the critical lengths, the so-called “Blech lengths”, were measured. It was found that jl_c increased with decreasing duty cycle. We measured a factor of 2.6 increase in jl_c for the 25% duty cycle as compared to dc. This duty cycle dependence of Blech length implies that electromigration resistance for an integrated circuit would be increased for small duty cycle operation by increasing the fraction of interconnects which are sub-Blech-length and are not susceptible to EM damage     

Temperature and modulation characteristics of resonant-cavitylight-emitting diodes

Resonant-cavity light-emitting diodes (RCLED) are novel, high-efficiency light-emitting diodes which employ optical microcavities. These diodes have higher intensities and higher spectral purity as compared to conventional LEDs. Analytical formulas are derived for the enhancement of the spontaneous emission along the optical axis of the cavity. The design rules for high-efficiency operation of RCLEDs are established. The temperature dependence of the emission intensity is analyzed in the range 20-80° and it is described by an exponential dependence with a characteristic temperature of 112 K. The modulation characteristics of RCLEDs exhibit 3 dB frequencies of 580 MHz. Eye diagrams at transmission rates of 622 Mb/s are wide open indicating the suitability of RCLEDs for high-speed data transmission     

Preparation of monodisperse polystyrene particles using thiol-ended polyethylene oxide stabilizer in dispersion polymerization

Summary Radical dispersion polymerization of styrene in aqueous ethanol solutions was performed in the presence of a new reactive polyethylene oxide stabilizer with thiol end groups. This reactive stabilizer was compared to the more conventional poly (N-vinylpyrrolidone). Particles size distribution, molecular weights and kinetics were investigated. We demonstrate that the thiol ended dispersant displays a high stabilizing efficiency. Particles size, molecular weights and conversions are strongly influenced by the amount of stabilizer used.