Intergranular stresses in ZIRCALOY-2

The development of the understanding of the intergranular stresses in ZIRCALOY-2 is reviewed. Neutron diffraction measurements of the intergranular strains were made on rod-textured material and highly textured plate. The elastoplastic self-consistent (EPSC) model provides a sound theoretical foundation for our understanding of the behavior. The strain response of ZIRCALOY-2 to applied tensile stress is well described for two very different textures with the same slip and hardening parameters. It is almost certain that tensile twinning is the explanation for the response to compressive stress and rolling that is, as yet, incompletely understood. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Warfarin anticoagulation in primary care: a regional survey of present practice and clinicians' views

The demand for anticoagulation services is rising. Warfarin anticoagulation has been shown to reduce the risk of stroke in patients with non-valvular atrial fibrillation by 68%. This raises issues about how services are best organized to initiate and monitor anticoagulation in this potentially large group of patients. We report the results of a regional postal survey undertaken to describe the views of general practitioners and consultants regarding warfarin anticoagulation in light of this potentially high increase in demand.     

A new tool to measure pressure under burn garments

This article introduces a new tool to measure the pressure that is under pressure garments. The Iscan (Tekscan, Inc.) system uses a patented ultra-thin (0.007 inch) sensor with multiple sensing locations that sample continuously at 100 times per second. It is noninvasive, convenient, and quick. The study had two parts. First, we established the validity and reliability of the device. Next, garment/scar interface pressures were measured on new garments with use of the Iscan system. Four garment types were studied, with 10 measurements made in each group: Isotoner gloves (Smith & Nephew Roylan, Inc.); custom-fit pressure gloves; Tubigrip forearm sleeves (Seton Health Care Group); and custom-fit pressure forearm sleeves. Mean garment/scar interface pressures were 18 +/- 2 mm Hg for the Isotoner glove, 34 +/- 5 mm Hg for the custom-fit pressure glove, 20 +/- 7 mm Hg for the Tubigrip sleeve, and 35 +/- 6 mm Hg for the custom-fit sleeve. We concluded that the Iscan system can be used to measure pressure under pressure garments accurately and reliably, and that custom-fit hand and forearm garments provide more pressure than Isotoner gloves or Tubigrip sleeves.     

Engineering design and mechatronics: The schemebuilder project

The paper describes the development of a software design aid for use at the conceptual stage of engineering design. It is intended for use in the design of mechatronic products but has wider potential uses. Early approaches were based on function structures and tables of options and the system that evolved allows the assembly of schemes linked by matching their input and output ports. A database of components is provided which can be accessed via different indexes and the designer can easily create and compare alternative schemes at the concept stage.A bond graph approach is used to define the interconnections between components. This allows correct port matching but also provides for future development such as constraint propagation through the design and links to simulation tools.     

An incomplete gauge formulation for 3D nodal finite-elementmagnetostatics

A method for imposing the gauge condition on the 3-D magnetic vector potential magnetostatic field computation using nodal finite elements is presented. In this method, the gauge A.w=0 is applied in the part of the problem that is not situated in the neighborhood of the materials interfaces that are tangential to w . This results in a formulation which maintains the discontinuous properties of the magnetic induction tangential components, reduces the number of unknowns, and improves the system matrix conditioning. The proposed formulation is compared with the Coulomb-gauge and ungauged formulations, showing that it results in better precision and worse conditioning than the Coulomb-gauge and has the same precision with a better conditioning than the ungauged formulation     

Strength,toughness and R-curve behaviour of SiC whisker-reinforced composite Si3N4 with reference to monolithic Si3N4

The flexural strength and fracture toughness of 30 vol% SiC whisker-reinforced Si₃N₄ material were determined as a function of temperature from 25 to 1400°C in an air environment. It was found that both strength and toughness of the composite material were almost the same as those of the monolithic counterpart. The room-temperature strength was retained up to 1100°C; however, appreciable strength degradation started at 1200°C and reached a maximum at 1400°C due to stable crack growth. In contrast, the fracture toughness of the two materials was independent of temperature with an average value of 5.66 MPam^1/2. It was also observed that the composite material exhibited no rising R-curve behaviour at room temperature, as was the case for the monolithic material. These results indicate that SiC whisker addition to the Si₃N₄ matrix did not provide any favourable effects on strength, toughness and R-curve behaviour.     

Einfluß der Korngröße auf mechanische Eigenschaften und den ungeschmierten reversierenden Gleitverschleiß von Al2O3-Keramik

Influence of grain size on mechanical properties and dry oscillating sliding wear of Al₂O₃-ceramics Specimens with average grain sizes varying between about 0.8 μm and 12 μm were produced by cold isostatic pressing of high purity Al₂O₃-powder followed by sintering between 1300°C and 1700°C. Hardness, Young's modulus, bending strength and fracture toughness were measured as a function of average grain sizes. Tribological tests were carried out on the different microstructures at normal laboratory air and room temperature by using a ring-on-block tribometer. Experimental results showed the dependence of mechanical properties on grain size, hardness and bending strength obeying a Hall-Petch type relation, approximately. Coefficient of friction was relatively independent of grain size under the test conditions used. However, wear intensity increased substantially if a critical grain size was surpassed. This was due to a change in mechanisms of material removal which was confirmed by scanning electron microscopical studies of the worn surfaces.