Emission characteristics of photonic crystal light-emitting diodes

Experimentally measured optical properties of photonic crystal LEDs are reported here. Photonic crystal and photonic quasi-crystal structures were fabricated on GaN epilayer LED wafer material using both direct-write electron beam lithography and nanoimprint lithography. Some of these structures were processed to make finished LEDs. Both electroluminescence and photoluminescence measurements were performed on these structures. Devices were characterized for their current-voltage characteristics, emission spectra, far-field emission pattern, and angular emission pattern. These results are useful for fabricating photonic crystal LEDs and assessing their operational properties.     

Degradation of pharmaceutical beta-blockers by electrochemical advanced oxidation processes using a flow plant with a solar compound parabolic collector

The degradation of the beta-blockers atenolol, metoprolol tartrate and propranolol hydrochloride was studied by electro-Fenton (EF) and solar photoelectro-Fenton (SPEF). Solutions of 10 L of 100 mg L⁻¹ of total organic carbon of each drug in 0.1 M Na₂SO₄ with 0.5 mM Fe²⁺ of pH 3.0 were treated in a recirculation flow plant with an electrochemical reactor coupled with a solar compound parabolic collector. Single Pt/carbon felt (CF) and boron-doped diamond (BDD)/air-diffusion electrode (ADE) cells and combined Pt/ADE-Pt/CF and BDD/ADE-Pt/CF cells were used. SPEF treatments were more potent with the latter cell, yielding 95-97% mineralization with 100% of maximum current efficiency and energy consumptions of about 0.250 kWh g TOC⁻¹. However, the Pt/ADE-Pt/CF cell gave much lower energy consumptions of about 0.080 kWh g TOC⁻¹ with slightly lower mineralization of 88-93%, then being more useful for its possible application at industrial level. The EF method led to a poorer mineralization and was more potent using the combined cells by the additional production of hydroxyl radicals (^•OH) from Fenton’s reaction from the fast Fe²⁺ regeneration at the CF cathode. Organics were also more rapidly destroyed at BDD than at Pt anode. The decay kinetics of beta-blockers always followed a pseudo first-order reaction, although in SPEF, it was accelerated by the additional production of ^•OH from the action of UV light of solar irradiation. Aromatic intermediates were also destroyed by hydroxyl radicals. Ultimate carboxylic acids like oxalic and oxamic remained in the treated solutions by EF, but their Fe(III) complexes were photolyzed by solar irradiation in SPEF, thus explaining its higher oxidation power. NO₃⁻ was the predominant inorganic ion lost in EF, whereas the SPEF process favored the production of NH₄⁺ ion and volatile N-derivatives.     

Magnetic binary oxide particles (MBOP): a promising adsorbent for removal of As (III) in water

Magnetic binary oxide particles (MBOP) synthesized using chitosan template has been investigated for uptake capacity of arsenic (III). Batch experiments were performed to determine the rate of adsorption and equilibrium isotherm and also effect of various rate limiting factors including adsorbent dose, pH, optimum contact time, initial adsorbate concentration and influence of presence cations and anions. It was observed that uptake of arsenic (III) was independent of pH of the solution. Maximum adsorption of arsenic (III) was ∼99% at pH 7.0 with dose of adsorbent 1 g/L and initial As (III) concentration of 1.0 mg/L at optimal contact time of 14 h. The adsorption equilibrium data fitted well to Langmuir and Freundlich isotherm. The maximum adsorption capacity of adsorbent was 16.94 mg/g. With increase in concentration of Ca²⁺, Mg²⁺ from 50 mg/L to 600 mg/L, adsorption of As (III) was significantly reduced while for Fe³⁺ the adsorption of arsenic (III) was increased with increase in concentration. Temperature study was carried out at 293 K, 303 K and 313 K reveals that the adsorption process is exothermic nature. A distinct advantage of this adsorbent is that adsorbent can readily be isolated from sample solutions by application of an external magnetic field. Saturation magnetization is a key factor for successful magnetic separation was observed to be 18.78 emu/g which is sufficient for separation by conventional magnate.     

Resonant metal-mesh bandpass filters for the far infrared

The spectral performance of freestanding resonant metal-mesh bandpass filters operating with center frequencies ranging from 585 GHz to 2.1 THz is presented. These filters are made up of a 12-μm-thick copper film with an array of cross-shaped apertures that fill a circular area with a 50-mm diameter. The filters exhibit power transmission in the range 97-100% at their respective center frequencies and stop-band rejection in excess of 18 dB. The theoretically predicted nondiffracting properties of the meshes are experimentally verified through high-resolution beam mapping. Scalability of the filter spectra with mesh dimensions is demonstrated over a wide spectral range. Several modeling methods are considered, and results from the models are shown.     

Photonic textile fibers

The characterization of the emission from nylon fibers containing laser dyes and TIO(2) nanoparticle scatterers indicates laser behavior with linewidths as low as 4 nm in 200- to 800-μm fibers. These materials can be used to produce lasing textiles, which can be used to produce photonic codes for a variety of civilian and military applications.     

In vivo measurement of the brain and skull resistivities using an EIT-based method and realistic models for the head

In vivo measurements of equivalent resistivities of skull (rho(skull)) and brain (rho(brain)) are performed for six subjects using an electric impedance tomography (EIT)-based method and realistic models for the head. The classical boundary element method (BEM) formulation for EIT is very time consuming. However, the application of the Sherman-Morrison formula reduces the computation time by a factor of 5. Using an optimal point distribution in the BEM model to optimize its accuracy, decreasing systematic errors of numerical origin, is important because cost functions are shallow. Results demonstrate that rho(skull)/rho(brain) is more likely to be within 20 and 50 rather than equal to the commonly accepted value of 80. The variation in rho(brain)(average = 301 omega x cm, SD = 13%) and rho(skull)(average = 12230 omega x cm, SD = 18%) is decreased by half, when compared with the results using the sphere model, showing that the correction for geometry errors is essential to obtain realistic estimations. However, a factor of 2.4 may still exist between values of rho(skull)/rho(brain) corresponding to different subjects. Earlier results show the necessity of calibrating rho(brain) and rho(skull) by measuring them in vivo for each subject, in order to decrease errors associated with the electroencephalogram inverse problem. We show that the proposed method is suited to this goal.     

Ultrasonic phased-array scanner with digital echo synthesis for Doppler echocardiography

For the purpose of the quantitative assessment of subtle disease processes in the cardiovascular system an electronically steered sector scanner that combines echographic imaging and Doppler blood velocity measurements has been developed. The integrated operation of a fast Fourier transform (FFT) Doppler signal processor for the simultaneous blood velocity evaluation of 64 individual gates is among the specific design goals. The instrument incorporates an unusually high degree of digital signal processing, which allows for high integration density, easy manufacturing and high reliability in future designs. The complex Doppler spectra are determined for each of the 64 Doppler gates in real time, and the subsequent computation of the first moment provides a reliable estimate of the mean blood flow velocities at the respective locations. The instantaneous velocity profile along the Doppler beam is displayed together with the calculated volume flow rate and a range-selected complete frequency spectrum. Results of both in vitro and in vivo tests indicate that in the future, a higher degree of digital signal processing could be implemented in complex ultrasonic systems.     

The consistent labeling problem: part I

In this first part of a two-part paper we introduce a general consistent labeling problem based on a unit constraint relation T containing N-tuples of units which constrain one another, and a compatibility relation R containing N-tuples of unit-label pairs specifying which N-tuples of units are compatible with which N-tuples of labels. We show that Latin square puzzles, finding N-ary relations, graph or auto-mata homomorphisms, graph colorings, as well as determining satisfiability of propositional logic statements and solving scene and edge labeling problems, are all special cases of the general consistent labeling problem. We then discuss the various approaches that researchers have used to speed up the tree search required to find consistent labelings. Each of these approaches uses a particular look-ahead operator to help eliminate backtracking in the tree search. Finally, we define the ?KP two-parameter class of look-ahead operators which includes, as special cases, the operators other researchers have used.