韧性断裂准则在板料成形中应用研究进展

对板料成形中的成形极限应力图、最大变薄率、成形极限图以及韧性断裂准则等预测成形极限的方法进行了综述和分析,提出了利用韧性断裂准则能够较好地预测塑性差的板料成形极限,而且还能考虑应变路径的变化.利用有限元方法模拟时,韧性断裂准则既可以运用到完全耦合的弹塑性损伤模型的增量方法中,也可以运用到一步有限元逆算法中.指出了为准确地预测成形极限,除了提高有限元模拟精度外,应找到一种本质地反映材料性能的准则.     

Effect of puerarin on the P13K pathway for glucose transportation and insulin signal transduction in adipocytes

To explore the effect of puerarin on insulin receptor (IR), insulin receptor substrate-1 (IRS-1) and protein expression of protein kinase B(PKB) in the P13K pathway of the glucose consumption, transportation and insulin signal transduction in 3T3-L1 adipocytes with insulin resistance. The insulin resistance 3T3-L1 adipocytes model was established by free fatty acid induction. The model cells were managed with puerarin in different concentrations. Glucose consumption was detected with glucose oxidase method, glucose transportation rate was determined by 2-deoxy-3H glucose ingesting method, and the IR, IRS-1 and PKB expression were determined by Western blot. Glucose consumption and transportation were significantly decreased in the model adipocytes, but increased after treated with puerarin (P<0.01). Moreover, the level of tyrosine phosphorylation of IR subunit β was higher in the puerarin treated groups, and that of IRS-1 was higher in the group treated with low dose puerarin than that in the model group. The 3T3-L1 adipocytes of insulin resistance model could be induced by free fatty acid successfully, puerarin could promote the glucose utilization in them to alleviate the insulin resistance, which may be related with the action in advancing the tyrosine phosphorylation of IR and IRS-1.     

Synthesis of High Density and Transparent Forsterite Ceramics Using Nano-Sized Precursors and Their Dielectric Properties

Forsterite (Mg₂SiO₄) ceramics were prepared using Mg(OH)₂ and SiO₂ as precursors, and the effect of powder characteristics of Mg(OH)₂ on calcination and sintering was investigated. The use of highly dispersed Mg(OH)₂ powder (HD powder) resulted in a lower calcination temperature. Forsterite powder of high homogeneity and small particle size prepared from the HD powder enabled synthesis of high-density forsterite ceramics by ordinary sintering without applying external pressure. Moreover, transparent forsterite ceramics were successfully synthesized through addition of excess Mg to the precursors to compensate for Mg evaporated during the sintering process. Subsequent dielectric measurements revealed that the transparent forsterite ceramics had a very low dielectric loss (tan δ<10⁻⁴).     

椭圆曲线密码中抗功耗分析攻击的标量乘改进方案

椭圆曲线标量乘法运算是椭圆曲线密码(ECC)体制中最主要的计算过程,标量乘法的效率和安全性一直是研究的热点。针对椭圆曲线标量乘运算计算量大且易受功耗分析攻击的问题,提出了一种抗功耗分析攻击的快速滑动窗口算法,在雅可比和仿射混合坐标系下采用有符号滑动窗口算法实现椭圆曲线标量乘计算,并采用随机化密钥方法抵抗功耗分析攻击。与二进制展开法、密钥分解法相比的结果表明,新设计的有符号滑动窗口标量乘算法计算效率、抗攻击性能有明显提高。     

面向协作的组织结构设计的集成模拟研究

基于计算组织理论,采用了多Agent模拟和离散事件模拟的集成方法,以组织成员间的协作关系为出发点,分析了不同的协作模式对组织效率的影响,讨论了在这些协作模式下沟通机制和激励机制的作用,得到了一些对组织结构设计有意义的结论。     

纳米陶瓷的发展及研究现状

综述了纳米陶瓷材料近年来的发展与应用，重点论述了纳米陶瓷的制备、性能及应用现状，并对纳米陶瓷的未来发展进行了展望。     

压缩感知算法在阵列测向中的相干信号分辨

现有算法在进行信号重建时,需要原始信号的稀疏信息来控制初始原子集的大小和算法迭代的最大次数,这削弱了重建精度,增加了计算复杂度,限制了其实际应用能力。为了克服这个问题,提出了基于正交匹配追踪算法的改进算法。该算法将阵元个数作为假设稀疏度,在稀疏度未知的初始阶段扩展初始原子集。最后通过对测量信号的幅度进行阈值过滤以实现信号的分辨和信源数的估计。为解决测向人员面对监测软件所指示的多个信号示向度中,无法分辨哪些指示方向是同一个信号源所产生的折反射信号的问题,首次提出了基于压缩感知算法的相干关系分析和相干信号分辨的模型。实测数据结果表明,该算法在不同环境下可以清晰分辨相干信号,并且能够适应多种实验平台。     

Application of scanning tunnelling microscopy to the quality control of tungsten carbide (WC-Co) ball bearings

Scanning tunnelling microscopy (STM) has been applied to the topographical study of tungsten carbide (with 6% Co) ball bearings in air. It is shown that, for this material, scanning tunnelling microscopy can provide not only general topographical information on the surface microtexture with a resolution of nearly 0.1 nm if required, but also quantitative information for the measurement of surface roughness. Thus, scanning tunnelling microscopy has utility as a quality control tool of particular relevance in the submicron range. The STM topographical results from specific tungsten carbide ball bearings are presented, and the limitations and applicability of the STM technique when used as a quality control tool are discussed.     

基于国产处理器增量式实时交通流预测算法及实现

针对城市交通难以处理大量数据且实时性差等问题,提出了根据增量式城市交通流数据预测拥堵情况的一种基于国产处理器的L-BFGS(limited-memory BFGS)算法。该算法通过存储向量序列计算Hessian矩阵,改进Two-Loop算法求下降方向,在Spark集群中并行处理时收敛速度快,适用于实时性要求强的城市交通场景。实验结果证明,L-BFGS预测算法完全可以在国产平台上对大规模的实时交通数据流进行快速建模、预测,在改善城市交通管理水平提供有效支撑的同时也丰富了国产芯片的应用领域。     

一种基于DaVinci DM 6446的非标准VGA接口设计与实现*

针对DaVinci数字媒体处理器应用系统中525/625P视频图像在VGA显示器上的显示方法,利用DaVinci SOC处理器视频处理子系统（VPSS）中视频处理后端（VPBE）硬件,完成了一种非标准VGA接口硬件和驱动程序软件的设计与实现,获得更好的视频显示质量,并扩展了DaVinci数字媒体应用系统的显示终端类型。